B000E - Airbag Crash Sensor Circuit Fault in Select Ford and Honda Models

Quick Answer

B000E means: B000E indicates a fault in the airbag crash sensor circuit, essential for airbag deployment.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with B000E? Immediate attention required to ensure airbag functionality.

Common Questions

What does B000E mean and how does it affect my car?

The B000E code indicates a problem with the airbag crash sensor circuit. This sensor is crucial for determining whether your airbags should deploy in an accident. If faulty, it could prevent airbag deployment, putting you at risk in the event of a crash.

What are the most common causes of B000E and how much does it cost to fix?

Common causes include a faulty crash sensor, damaged wiring, or issues with the airbag control module. Repair costs typically range from $150 to $300, depending on the specific repair needed.

Can I drive my car with B000E or should I stop immediately?

It is not safe to drive your vehicle if the B000E code is present, as it indicates a malfunction in the airbag system. Ignoring this can lead to serious injury in an accident due to airbag failure.

How can I diagnose B000E myself using GeekOBD APP?

With the GeekOBD APP, you can scan for all trouble codes and view freeze frame data for B000E. Follow the prompts to check the specific parameters and identify potential issues with the airbag system.

What vehicles are most commonly affected by B000E?

The B000E code is often seen in 2013-2018 Ford Escape and 2016-2018 Honda Civic models. Checking for any recalls or technical service bulletins (TSBs) related to the airbag system for these vehicles is advisable.

How can I prevent B000E from happening again?

Regularly inspect your vehicle’s wiring and connectors for wear and tear, and ensure that any accidents or bodywork are properly addressed to avoid future issues with the airbag system.

What is B000E?

The B000E diagnostic trouble code indicates a fault in the airbag crash sensor circuit. This code is primarily associated with Ford models, particularly the 2013-2018 Ford Escape, and certain Honda models like the 2016-2018 Honda Civic. When this code is triggered, it suggests that the airbag system has detected an issue with the crash sensor's operation, which is crucial for deploying airbags during a collision. The crash sensor monitors deceleration and changes in vehicle dynamics to determine if an airbag deployment is necessary. If the sensor is malfunctioning, it can lead to non-deployment of airbags in the event of an accident, significantly increasing the risk of injury. Additionally, the code may be accompanied by the illumination of the airbag warning light on the dashboard, alerting the driver to a potential safety issue. The implications of ignoring this code can be severe, as it compromises the effectiveness of your vehicle's safety systems. Therefore, addressing the B000E code promptly is essential for safe vehicle operation.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B000E is present:

  • The airbag warning light remains illuminated on the dashboard, indicating a fault in the airbag system.
  • Unexpected airbag deployment or failure to deploy during a simulated crash test, which could be a serious safety issue.
  • Inconsistent behavior of the airbag system, such as temporary warning light deactivation, complicating diagnosis.
  • Possible error messages displayed on the vehicle's onboard diagnostics, indicating issues with the airbag system.
  • Frequent electrical issues, such as fuses blowing related to the airbag circuit, may also be a symptom.

Possible Causes

Most common causes of B000E (ordered by frequency):

  1. The most common cause is a faulty crash sensor, which has a likelihood of around 60%. This may occur due to impact damage or wear over time.
  2. Another potential cause is damaged wiring or connectors in the airbag circuit, accounting for about 25% of cases. Corrosion or loose connections can disrupt the signal.
  3. A third cause could be a malfunctioning airbag control module, which can happen due to software issues or internal failure, leading to a 10% likelihood.
  4. Less common but serious causes include issues with the vehicle's body structure due to previous accidents that affect sensor placement.
  5. A rare but possible cause could be a software glitch in the vehicle's onboard computer, which may necessitate a firmware update.

B000E Repair Costs

Cost Breakdown by Repair Type

Crash Sensor Replacement

Replacing a faulty crash sensor with a new OEM part to restore system functionality.

  • Total: $150 - $300
  • Success rate: 95%
Money-Saving Tips for B000E
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B000E Diagnosis Process

Follow these systematic steps to accurately diagnose B000E. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for any obvious signs such as damaged wiring, loose connections, or corrosion that could affect the crash sensor (5-10 minutes)

Step 1: Initial visual inspection - Check for any obvious signs such as damaged wiring, loose connections, or corrosion that could affect the crash sensor (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context, which helps in pinpointing the issue (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context, which helps in pinpointing the issue (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter or specific diagnostic tools to test the crash sensor and related components for proper functionality (20-30 minutes)

Step 3: Component testing - Use a multimeter or specific diagnostic tools to test the crash sensor and related components for proper functionality (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - After repairs, verify the proper operation of the airbag system and clear codes to ensure the issue is resolved (10-15 minutes)

Step 4: System function test - After repairs, verify the proper operation of the airbag system and clear codes to ensure the issue is resolved (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm the repair success and ensure no warning lights reappear (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm the repair success and ensure no warning lights reappear (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Crash Sensor Replacement on 2016 Ford Escape

Vehicle: 2016 Ford Escape, 65,000 miles

Problem: Customer reported airbag warning light remained on after a minor collision.

Diagnosis: Performed a scan with the GeekOBD APP, confirming a B000E code related to the crash sensor. Visual inspection revealed a damaged sensor.

Solution: Replaced the faulty crash sensor and cleared the codes. Conducted a system function test to ensure proper airbag operation.

Cost: $250 (parts: $150 for sensor, $100 for labor)

Result: Airbag system functioned correctly post-repair, and the warning light was extinguished.

Case Study 2: Airbag Control Module Replacement on 2017 Honda Civic

Vehicle: 2017 Honda Civic, 40,000 miles

Problem: Customer experienced intermittent airbag warning light and inconsistent airbag deployment.

Diagnosis: Used GeekOBD APP to retrieve codes, finding B000E along with other related codes. Testing revealed a faulty airbag control module.

Solution: Replaced the airbag control module and repaired any associated wiring issues.

Cost: $400 (parts: $250 for module, $150 for labor)

Result: Post-repair, the airbag system was verified to operate correctly, eliminating warning lights.

Diagnose B000E

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B000E
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes