B0060 - Airbag Sensor Fault Code in Honda, Toyota, and Ford Vehicles

Quick Answer

B0060 means: B0060 indicates a fault in the airbag sensor circuit, specifically related to the front passenger airbag.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with B0060? Immediate attention is advised to ensure airbag functionality.

Common Questions

What does B0060 mean and how does it affect my car?

B0060 signifies an issue with the airbag sensor, particularly for the front passenger airbag, which can prevent it from deploying during an accident. This can significantly compromise safety, making it crucial to have the issue diagnosed and repaired promptly.

What are the most common causes of B0060 and how much does it cost to fix?

The most frequent causes of B0060 include faulty airbag sensors and damaged wiring. Repair costs can range from $100 to $300 depending on the specific issue and required parts.

Can I drive my car with B0060 or should I stop immediately?

It is not recommended to drive your vehicle with the B0060 code active. Doing so may mean that your airbag system is compromised, which poses a significant safety risk in the event of a crash.

How can I diagnose B0060 myself using GeekOBD APP?

To diagnose B0060 with the GeekOBD APP, connect the app to your vehicle's OBD2 port, retrieve diagnostic trouble codes, and analyze the freeze frame data to understand when the issue occurred and under what conditions.

What vehicles are most commonly affected by B0060?

B0060 is often reported in vehicles like the 2015-2018 Honda Civic, 2017-2020 Toyota Camry, and various Ford models from 2013-2018. Always check for any recalls or technical service bulletins (TSBs) related to airbag systems for your specific vehicle.

How can I prevent B0060 from happening again?

To prevent B0060 from recurring, conduct regular maintenance checks on your vehicle's airbag system, avoid modifying wiring, and ensure proper care during cleaning to avoid moisture exposure.

What is B0060?

The Diagnostic Trouble Code (DTC) B0060 is an indication of a problem with the airbag system's sensor circuit. This code usually points to an issue with the front passenger airbag sensor, which can prevent the airbag from deploying in the event of a collision. When the B0060 code is triggered, it typically signifies that the airbag control module has detected an abnormality in the sensor's readings, such as an open or short circuit. This can lead to the airbag warning light illuminating on your dashboard, signaling that there's a potential safety risk. For many vehicle owners, particularly those with models like the 2015-2018 Honda Civic or 2017-2020 Toyota Camry, understanding this code is critical for ensuring both driver and passenger safety. Ignoring this code could mean that your airbag system is compromised, which might result in severe consequences during an accident. It is essential to address this issue promptly, as airbag systems are designed to protect occupants during a collision. The repair process may involve inspecting wiring connections, replacing sensors, or even resetting the airbag control module. Proper diagnosis and repair can help restore the airbag system to optimal functionality, providing peace of mind for vehicle owners.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B0060 is present:

  • The airbag warning light is illuminated on the dashboard, indicating a fault in the airbag system.
  • The airbag may not deploy during a collision, posing a significant safety risk.
  • The vehicle may experience intermittent electrical issues, such as flickering lights or other dashboard alerts.
  • In some cases, the vehicle's safety systems may become disabled, resulting in reduced overall safety.
  • You may notice unusual sounds or clicks from the dashboard area, suggesting issues with the airbag control module.

Possible Causes

Most common causes of B0060 (ordered by frequency):

  1. The most common cause of B0060 is a faulty airbag sensor, which occurs in approximately 60% of cases. This can be due to wear and tear or exposure to moisture.
  2. Another cause could be damaged wiring or poor connections within the airbag system, which can lead to interrupted signals. This is often found in vehicles with older wiring harnesses.
  3. A third possibility includes a malfunctioning airbag control module. Regular maintenance and inspections can help prevent this issue by identifying problems early.
  4. Less common but serious causes include a crash that has damaged the airbag system, requiring extensive repairs.
  5. A rare cause might involve software issues within the vehicle's onboard computer, which may require a dealer-level reprogramming.

B0060 Repair Costs

Cost Breakdown by Repair Type

Airbag Sensor Replacement

Replacing a faulty airbag sensor, which is the most common fix for B0060.

  • Total: $150 - $300
  • Success rate: 90%
Wiring Repair

Repairing or replacing damaged wiring in the airbag circuit.

  • Total: $100 - $250
  • Success rate: 80%
Airbag Control Module Reprogramming

Reprogramming the airbag control module if software issues are detected.

  • Total: $75 - $150
  • Success rate: 85%
Money-Saving Tips for B0060
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B0060 Diagnosis Process

Follow these systematic steps to accurately diagnose B0060. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter or specific diagnostic tools to test suspected components such as the airbag sensor (20-30 minutes)

Step 3: Component testing - Use a multimeter or specific diagnostic tools to test suspected components such as the airbag sensor (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - Verify proper operation after repairs and clear codes using the GeekOBD APP (10-15 minutes)

Step 4: System function test - Verify proper operation after repairs and clear codes using the GeekOBD APP (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success and ensure the airbag light remains off (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success and ensure the airbag light remains off (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Airbag Sensor Replacement in 2017 Honda Accord

Vehicle: 2017 Honda Accord, 60,000 miles

Problem: Customer noticed airbag warning light was on, and the car was due for a safety inspection.

Diagnosis: Using the GeekOBD APP, I scanned the vehicle and retrieved the B0060 code, indicating a fault in the passenger airbag sensor.

Solution: Replaced the faulty airbag sensor, performed a system reset, and cleared all codes.

Cost: $250 (sensor $200, labor $50)

Result: The airbag warning light was cleared, and the system passed the safety inspection.

Case Study 2: Wiring Repair on 2015 Ford Focus

Vehicle: 2015 Ford Focus, 45,000 miles

Problem: Airbag light was illuminated, and the customer reported intermittent electrical issues.

Diagnosis: A thorough inspection revealed damaged wiring in the airbag circuit leading to the B0060 code.

Solution: Repaired the damaged wiring and ensured all connections were secure.

Cost: $150 (labor $50, parts $100)

Result: After repairs, the airbag system was fully functional, and the warning light was off.

Diagnose B0060

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B0060
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes