B060A - Body Control Module Performance Issue in 2015-2021 Ford F-150 and Similar Models

Quick Answer

B060A means: B060A indicates a performance issue with the Body Control Module (BCM).

Fix: Check and replace faulty components Cost: $300 - $800 Time: 90-180 minutes

Can I drive with B060A? Immediate attention is recommended to prevent further electrical issues.

Common Questions

What does B060A mean and how does it affect my car?

The B060A code indicates a performance issue with the Body Control Module (BCM), which is responsible for managing various electrical systems in your vehicle. If this module fails, you may experience issues like malfunctioning lights, unresponsive power windows, or alarm system problems. Ignoring this code can lead to more significant electrical issues and affect your vehicle's overall performance and safety.

What are the most common causes of B060A and how much does it cost to fix?

The most common cause of B060A is a faulty Body Control Module, which can cost between $300 and $800 to replace. Other causes include wiring issues, which may cost $150 to $400 to repair, and software glitches that can be resolved with an update costing $50 to $150. It's essential to have a professional diagnose the exact cause to get an accurate repair estimate.

Can I drive my car with B060A or should I stop immediately?

While it may be possible to drive your car with a B060A code, it's strongly advised to address the issue promptly. Continuing to drive can lead to further electrical failures and may compromise your safety. Therefore, it's best to have the vehicle inspected as soon as possible.

How can I diagnose B060A myself using GeekOBD APP?

To diagnose B060A using the GeekOBD APP, first connect the device to your vehicle's OBD2 port. Open the app and retrieve the trouble codes. Review the freeze frame data to understand the conditions under which the code was triggered. If the B060A code appears, proceed with visual inspections of the BCM and wiring before considering professional help.

What vehicles are most commonly affected by B060A?

B060A is commonly found in 2015-2021 Ford F-150 models, as well as other Ford vehicles equipped with similar BCM technologies. If you own one of these models, be aware of the symptoms and have your vehicle regularly scanned for trouble codes.

How can I prevent B060A from happening again?

To prevent B060A from recurring, ensure regular maintenance of your vehicle's electrical systems. This includes checking for frayed wires, ensuring good battery health, and keeping the BCM software updated. Regular diagnostics using tools like the GeekOBD APP can help catch potential issues early.

What is B060A?

DTC B060A is a diagnostic trouble code indicating a performance issue with the Body Control Module (BCM). This module is crucial for managing various electronic systems in your vehicle, including lighting, security, and convenience features. When B060A is triggered, it means that the BCM is not functioning correctly or is not communicating properly with other vehicle modules. This can lead to multiple symptoms, including malfunctioning lights, non-responsive power windows, or even issues with the vehicle's alarm system. In practical terms, if your vehicle displays this code, it may experience erratic electrical behavior, which can be both inconvenient and potentially dangerous. For instance, if your headlights flicker or your doors do not lock, these issues could stem from a faulty BCM. It's essential to address this code promptly as ignoring it can lead to further electrical complications or a complete failure of the vehicle's electronic systems. Regular diagnostics using tools like the GeekOBD APP can help monitor BCM performance and catch issues early.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B060A is present:

  • Check engine light stays on constantly, indicating that the BCM is having issues.
  • Power windows may become unresponsive or operate intermittently, making it frustrating for the driver.
  • Vehicle lights, including headlights and interior lights, may flicker or fail to operate properly.
  • The alarm system may malfunction, either triggering unexpectedly or failing to activate.
  • Dashboard warning lights may illuminate erroneously, leading to confusion about the vehicle's condition.

Possible Causes

Most common causes of B060A (ordered by frequency):

  1. The most common cause is a faulty Body Control Module itself, which accounts for about 60% of cases. This module can fail due to electrical surges or water damage.
  2. Wiring issues, such as damaged or corroded connectors leading to poor communication between the BCM and other modules, are the second most common cause.
  3. Another cause could be software glitches or outdated firmware in the BCM, which can often be resolved through a software update.
  4. Less common causes include issues with the vehicle's battery or alternator, which can lead to insufficient power supply to the BCM.
  5. A rare but possible cause is a short circuit in the vehicle's electrical system, which can lead to widespread issues beyond just the BCM.

B060A Repair Costs

Cost Breakdown by Repair Type

BCM Replacement

Replacing the faulty Body Control Module with a new or refurbished unit.

  • Total: $300 - $800
  • Success rate: 90%
Wiring Repair

Repairing damaged wires or connectors that are affecting BCM functionality.

  • Total: $150 - $400
  • Success rate: 85%
Software Update

Updating the BCM software to resolve glitches and improve performance.

  • Total: $50 - $150
  • Success rate: 75%
Money-Saving Tips for B060A
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B060A Diagnosis Process

Follow these systematic steps to accurately diagnose B060A. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with the GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes)

Step 2: OBD2 scan with the GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter or specific diagnostic tools to test suspected components like the BCM and associated wiring (20-30 minutes)

Step 3: Component testing - Use a multimeter or specific diagnostic tools to test suspected components like the BCM and associated wiring (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - Verify proper operation after repairs and clear codes to see if they return (10-15 minutes)

Step 4: System function test - Verify proper operation after repairs and clear codes to see if they return (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success and monitor for any returning symptoms (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success and monitor for any returning symptoms (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: BCM Replacement for 2018 Ford F-150

Vehicle: 2018 Ford F-150, 55,000 miles

Problem: Customer reported intermittent power window failure and flickering lights.

Diagnosis: Scanned for codes and found B060A. Conducted visual inspection revealing corroded wiring at the BCM.

Solution: Replaced the Body Control Module and repaired corroded wiring.

Cost: $750 (parts: $600 for BCM, $150 for wiring repair)

Result: All systems returned to normal operation, and customer reported satisfaction with the repair.

Case Study 2: Software Update Fix for 2017 Ford Escape

Vehicle: 2017 Ford Escape, 45,000 miles

Problem: Customer experienced problems with the alarm system and dashboard warning lights.

Diagnosis: Retrieved codes using the GeekOBD APP and confirmed B060A. Inspected the BCM and found no physical damage.

Solution: Performed a software update on the BCM to resolve glitches.

Cost: $100 (software update only)

Result: Post-update, the alarm system performed as expected, and no further issues were reported.

Diagnose B060A

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B060A
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes