Quick Answer
B060F means: B060F indicates a fault with the steering column control module.
Can I drive with B060F? Address this issue immediately to ensure vehicle safety.
Common Questions
What does B060F mean and how does it affect my car?
DTC B060F indicates a malfunction in the steering column control module, affecting the steering angle sensor. This can lead to poor steering response and instability, particularly dangerous in adverse driving conditions.
What are the most common causes of B060F and how much does it cost to fix?
Common causes include a faulty steering angle sensor and wiring issues. Repair costs can range from $100 to $800 depending on the severity, with sensor replacements being the most frequent and cost-effective fix.
Can I drive my car with B060F or should I stop immediately?
It's advisable to avoid driving the vehicle until the issue is resolved, as B060F can compromise steering control and overall vehicle safety.
How can I diagnose B060F myself using GeekOBD APP?
You can diagnose B060F using the GeekOBD APP by scanning for trouble codes, reviewing freeze frame data, and checking the status of the steering angle sensor. Follow the app's instructions for component testing.
What vehicles are most commonly affected by B060F?
DTC B060F is commonly found in 2015-2020 Ford F-150 models, but it can also occur in other Ford vehicles with similar electronic steering systems.
How can I prevent B060F from happening again?
Regular maintenance of your vehicle’s electrical system, ensuring proper connections, and avoiding aftermarket modifications can help prevent the recurrence of B060F.
What is B060F?
The diagnostic trouble code (DTC) B060F indicates a problem with the steering column control module, particularly relating to the steering angle sensor. This code is often encountered in vehicles such as the 2015-2020 Ford F-150 and can lead to various issues including improper steering response and erratic behavior of electronic stability control systems. When this code is triggered, it typically means that the vehicle's computer has detected a fault in the communication between the steering column control module and the vehicle's powertrain control module (PCM). This communication is crucial for the safe operation of advanced driver assistance systems (ADAS) that rely on accurate steering information. Ignoring this code can lead to serious safety concerns, such as malfunctioning electronic stability control, which can increase the risk of losing control of the vehicle during adverse driving conditions. Additionally, a persistent B060F code can prevent the proper functioning of other systems, such as cruise control and lane-keeping assist, making it essential to address the issue promptly. Understanding the implications of DTC B060F not only helps in maintaining vehicle safety but also assists in preventing costly repairs down the line.
System: B - Body (Airbags, Lighting, Security, Climate Control)
Symptoms
Common symptoms when B060F is present:
- The check engine light illuminates consistently, indicating that there’s a persistent issue with the steering system.
- You may notice that the steering feels unusually stiff or too loose, affecting vehicle handling and safety.
- The electronic stability control (ESC) system warning light may activate, which could compromise your vehicle's stability in difficult driving conditions.
- Cruise control may not function properly or may disengage unexpectedly, causing frustration during long drives.
- You might experience intermittent power loss to steering assistance, leading to unpredictable steering response.
Possible Causes
Most common causes of B060F (ordered by frequency):
- The most common cause is a malfunctioning steering angle sensor, which happens in about 60% of cases. This sensor informs the vehicle’s control systems about the steering wheel's position.
- Another frequent issue is faulty wiring or connections between the steering column control module and the PCM, accounting for 25% of occurrences. Corrosion or damage can disrupt communication.
- Less common causes include software glitches in the vehicle's control modules. Regular software updates can prevent these issues.
- A rare but serious cause could be a complete failure of the steering column control module itself, which may require replacement and can be costly.
- In some cases, aftermarket modifications to the steering system can lead to B060F, so it's important to ensure compatibility of parts.
B060F Repair Costs
Cost Breakdown by Repair Type
Steering Angle Sensor Replacement
Replacing a faulty steering angle sensor to restore proper function.
- Total: $150 - $300
- Success rate: 90%
Wiring Repair
Repairing damaged wiring or connectors to ensure proper communication.
- Total: $100 - $200
- Success rate: 85%
Steering Column Control Module Replacement
Replacing the control module if it is found to be defective.
- Total: $400 - $800
- Success rate: 95%
Money-Saving Tips for B060F
- Start with the most common and least expensive repairs first
- Use GeekOBD APP to confirm diagnosis before replacing expensive parts
- Consider preventive maintenance to avoid future occurrences
- Compare prices for OEM vs aftermarket parts based on your needs
- Address the issue promptly to prevent more expensive secondary damage
Diagnostic Steps
Professional B060F Diagnosis Process
Follow these systematic steps to accurately diagnose B060F. Each step builds on the previous one to ensure accurate diagnosis.
Step 1: Step 1: Begin with a thorough visual inspection
Step 1: Begin with a thorough visual inspection. Look for signs of damaged wiring, loose connectors, or corrosion in the steering column area (5-10 minutes).
Step 2: Step 2: Use the GeekOBD APP for an OBD2 scan
Step 2: Use the GeekOBD APP for an OBD2 scan. Retrieve all diagnostic codes and freeze frame data to understand the context of the fault (10-15 minutes).
Step 3: Step 3: Perform component testing on the steering angle sensor and other related components using a multimeter or specific diagnostic tools (20-30 minutes)
Step 3: Perform component testing on the steering angle sensor and other related components using a multimeter or specific diagnostic tools (20-30 minutes).
Step 4: Step 4: Conduct a system function test to verify the operation of the steering systems post-repair, ensuring codes are cleared (10-15 minutes)
Step 4: Conduct a system function test to verify the operation of the steering systems post-repair, ensuring codes are cleared (10-15 minutes).
Step 5: Step 5: Execute a road test under varying conditions to confirm repair success and ensure the vehicle handles correctly (15-20 minutes)
Step 5: Execute a road test under varying conditions to confirm repair success and ensure the vehicle handles correctly (15-20 minutes).
Important Notes
- Always verify the repair with GeekOBD APP after completing diagnostic steps
- Clear codes and test drive to ensure the problem is resolved
- Address underlying causes to prevent code recurrence
Real Repair Case Studies
Case Study 1: Steering Angle Sensor Replacement on 2017 Ford F-150
Vehicle: 2017 Ford F-150, 50,000 miles
Problem: Customer reported persistent check engine light and stiff steering.
Diagnosis: Diagnostic scan revealed B060F code linked to a faulty steering angle sensor.
Solution: Replaced the steering angle sensor and cleared the codes.
Cost: $200 (sensor cost included)
Result: Check engine light cleared and steering returned to normal operation.
Case Study 2: Wiring Repair on 2018 Ford Explorer
Vehicle: 2018 Ford Explorer, 30,000 miles
Problem: Customer experienced intermittent loss of steering assist and ESC warning light.
Diagnosis: Inspection found corroded wiring in the steering column area.
Solution: Repaired the wiring and secured all connectors.
Cost: $150 (including labor)
Result: Steering assist restored and warning lights turned off.