Quick Answer
B063B means: B063B indicates a fault in the driver seat position sensor.
Can I drive with B063B? High, as it could impact vehicle safety features.
Common Questions
What does B063B mean and how does it affect my car?
The B063B code signifies an issue with the driver seat position sensor in your vehicle. This can affect your ability to adjust the seat properly, which could lead to discomfort while driving. If the issue persists, it can impact other systems like airbags, potentially compromising safety.
What are the most common causes of B063B and how much does it cost to fix?
Common causes of the B063B code include a faulty driver seat position sensor, damaged wiring, or issues with the seat control module. Repair costs can range from $150 to $400, depending on the specific issue identified during diagnostics.
Can I drive my car with B063B or should I stop immediately?
While you can technically drive your vehicle with the B063B code, it is advisable to address the issue as soon as possible. Ignoring the code may lead to discomfort while driving and could affect the functionality of critical safety features like airbags.
How can I diagnose B063B myself using GeekOBD APP?
To diagnose the B063B code using the GeekOBD APP, first, connect your OBD2 scanner to the vehicle. Open the app and retrieve the trouble codes. Review the freeze frame data to understand the conditions when the code was triggered. Use the app to monitor sensor inputs while adjusting the seat to identify any anomalies.
What vehicles are most commonly affected by B063B?
The B063B code is frequently seen in 2015-2018 Ford models, such as the Ford F-150, Ford Explorer, and Ford Edge. It's important to check for any recalls or technical service bulletins related to the seat control systems in these vehicles.
How can I prevent B063B from happening again?
Regular maintenance of your vehicle's electrical systems can help prevent B063B from recurring. Ensure that connections are clean and free of corrosion, and avoid water exposure to electrical components. Additionally, conduct regular inspections of the seat adjustment mechanisms.
What is B063B?
The diagnostic trouble code (DTC) B063B indicates a malfunction related to the vehicle's seat control system, specifically referring to a problem with the driver seat position sensor. This code is particularly common in 2015-2018 Ford vehicles, including models like the Ford F-150 and Ford Explorer. When this code appears, it typically means that the power seat mechanism is not functioning as intended, which could prevent proper adjustment of the seat. In real-world terms, this can lead to discomfort while driving, as the seat may not adjust to the driver’s preferred position. If left unaddressed, this issue could also lead to further complications, such as affecting other electrical components associated with the seat system, potentially leading to more costly repairs. Additionally, the presence of this code could cause the airbag system to malfunction, as some vehicles link seat position with passenger safety features. Therefore, it’s crucial to address the issue promptly for both comfort and safety.
System: B - Body (Airbags, Lighting, Security, Climate Control)
Symptoms
Common symptoms when B063B is present:
- The check engine light is illuminated, signaling a fault in the vehicle's systems.
- The driver seat fails to adjust properly, making it difficult for the driver to find a comfortable position.
- Inconsistent seat position memory; the seat returns to an incorrect position when adjusted.
- Airbag warning light may also illuminate, indicating potential issues with safety systems.
- Electrical noise or clicking sounds from the seat adjustment mechanism when attempting to adjust.
Possible Causes
Most common causes of B063B (ordered by frequency):
- The most common cause is a failed driver seat position sensor, with about 60% likelihood of being the issue. This sensor detects the seat's position and communicates with the vehicle's computer.
- Another possible cause is damaged wiring or connections in the seat adjustment circuit, which can lead to intermittent issues.
- A third cause could be a malfunctioning seat control module, which processes signals from the seat position sensor.
- Less common but serious could be water intrusion into the seat adjustment mechanism, which can lead to corrosion and electrical failures.
- A rare cause might be a fault in the vehicle's main control module affecting the seat systems.
B063B Repair Costs
Cost Breakdown by Repair Type
Driver Seat Position Sensor Replacement
Replacing the faulty driver seat position sensor with a new OEM part.
- Total: $150 - $300
- Success rate: 85%
Seat Control Module Repair
Repairing or replacing the seat control module if it's found to be faulty during diagnostics.
- Total: $200 - $400
- Success rate: 75%
Money-Saving Tips for B063B
- Start with the most common and least expensive repairs first
- Use GeekOBD APP to confirm diagnosis before replacing expensive parts
- Consider preventive maintenance to avoid future occurrences
- Compare prices for OEM vs aftermarket parts based on your needs
- Address the issue promptly to prevent more expensive secondary damage
Diagnostic Steps
Professional B063B Diagnosis Process
Follow these systematic steps to accurately diagnose B063B. Each step builds on the previous one to ensure accurate diagnosis.
Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion around the seat control module (5-10 minutes)
Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion around the seat control module (5-10 minutes).
Step 2: Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes)
Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes).
Step 3: Step 3: Component testing - Use a multimeter to test the driver seat position sensor for continuity and proper voltage (20-30 minutes)
Step 3: Component testing - Use a multimeter to test the driver seat position sensor for continuity and proper voltage (20-30 minutes).
Step 4: Step 4: System function test - After any repairs, verify the operation of the seat adjustment system and clear codes (10-15 minutes)
Step 4: System function test - After any repairs, verify the operation of the seat adjustment system and clear codes (10-15 minutes).
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm that the seat functions correctly (15-20 minutes)
Step 5: Road test verification - Drive the vehicle under various conditions to confirm that the seat functions correctly (15-20 minutes).
Important Notes
- Always verify the repair with GeekOBD APP after completing diagnostic steps
- Clear codes and test drive to ensure the problem is resolved
- Address underlying causes to prevent code recurrence
Real Repair Case Studies
Case Study 1: Driver Seat Position Sensor Replacement in 2016 Ford F-150
Vehicle: 2016 Ford F-150, 45,000 miles
Problem: Customer reported the driver seat would not adjust, and the check engine light was on.
Diagnosis: After running diagnostics, B063B was the only code present. A visual inspection revealed that the seat position sensor wiring was damaged.
Solution: Replaced the driver seat position sensor and repaired the wiring harness.
Cost: $250 (parts: $150 for sensor, $100 for labor)
Result: The seat adjustment function was restored, and the check engine light cleared.
Case Study 2: Seat Control Module Repair in 2017 Ford Explorer
Vehicle: 2017 Ford Explorer, 30,000 miles
Problem: Customer experienced intermittent seat adjustment failures and airbag warning light.
Diagnosis: Diagnostic tests showed B063B along with a fault in the seat control module.
Solution: Replaced the faulty seat control module.
Cost: $350 (parts: $250 for module, $100 for labor)
Result: Seat adjustments were fully functional, and the airbag warning light was resolved.