B063F - Understanding the Body Control Module Error in 2015-2019 Ford F-150

Quick Answer

B063F means: B063F indicates a fault in the Body Control Module's communication system.

Fix: Check and replace faulty components Cost: $100 - $300 Time: 90-180 minutes

Can I drive with B063F? Immediate diagnosis and repair recommended to avoid further electronic issues.

Common Questions

What does B063F mean and how does it affect my car?

The B063F code indicates a communication error in the Body Control Module, which could affect various electrical functions in your vehicle such as locks, lights, and windows. If left unchecked, it may lead to more severe electrical issues and could compromise your vehicle's safety features.

What are the most common causes of B063F and how much does it cost to fix?

Common causes include damaged wiring (60% likelihood), software issues (25%), or a failing BCM. Repair costs can range from $100 for wiring repairs to $800 for BCM replacement, depending on the severity of the issue.

Can I drive my car with B063F or should I stop immediately?

While it may be possible to drive your vehicle, it's not advisable due to potential malfunctions in critical systems. Addressing the B063F code quickly is important to ensure your safety and the proper function of your vehicle.

How can I diagnose B063F myself using GeekOBD APP?

Using the GeekOBD APP, you can perform a full OBD2 scan to retrieve the B063F code and any other related codes. Analyze the freeze frame data to understand under what conditions the code was triggered, which can guide your troubleshooting process.

What vehicles are most commonly affected by B063F?

The B063F code is frequently seen in 2015-2019 Ford F-150 models, but it can also occur in other vehicles with similar BCM configurations. Always check for any recalls or Technical Service Bulletins related to your specific model.

How can I prevent B063F from happening again?

Regular maintenance checks on your vehicle's electrical system, including inspecting wiring and connectors, can help prevent the B063F code from reoccurring. Additionally, avoid aftermarket modifications that could interfere with the BCM.

What is B063F?

The B063F diagnostic trouble code (DTC) indicates a malfunction related to the Body Control Module (BCM) in your vehicle. Specifically, it refers to a communication issue or fault in the BCM that manages various electronic functions such as lighting, power windows, and door locks. When this code is triggered, it means that the BCM detected an abnormal reading or failure while trying to communicate with other modules in the vehicle. This can lead to various malfunctions affecting the comfort and safety features of your car. For Ford F-150 owners from 2015 to 2019, this could manifest in problems such as intermittent power window failures or malfunctioning interior lights. Beyond the immediate inconveniences, ignoring this code can lead to further electrical issues, potentially escalating repair costs. If you see the B063F code, it's crucial to diagnose and address it promptly to ensure your vehicle's electronic systems operate efficiently. Regular checks on the wiring and connections related to the BCM can help prevent this code from arising and maintain the reliability of your vehicle's systems.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B063F is present:

  • The check engine light remains illuminated, indicating a persistent issue with the Body Control Module.
  • Intermittent failures of electrical components, such as power windows or door locks, leading to frustration during use.
  • Dimming or flickering interior lights, which may suggest unstable voltage output from the BCM.
  • Erratic behavior of the vehicle's alarm system, possibly resulting in false alarms or failure to activate.
  • Unresponsive vehicle features like remote entry or lighting, significantly affecting convenience and safety.

Possible Causes

Most common causes of B063F (ordered by frequency):

  1. The most common cause of the B063F code is damaged wiring or connectors related to the BCM, with a likelihood of about 60%. This can occur due to wear and tear or exposure to moisture.
  2. A second cause could be software issues within the BCM itself, which may require reprogramming or updating to resolve the error. This has a likelihood of around 25%.
  3. Another cause could be a failing Body Control Module, which may require replacement. Regular inspections can help prevent this issue by identifying early signs.
  4. Less common, but serious causes include corrosion on connectors, which can disrupt communication between modules, leading to further electrical issues.
  5. A rare cause could be interference from aftermarket accessories, such as alarms or remote start systems, which can confuse the BCM and trigger the B063F code.

B063F Repair Costs

Cost Breakdown by Repair Type

Wiring Repair

Fixing damaged wiring or connectors related to the BCM.

  • Total: $100 - $300
  • Success rate: 85%
BCM Reprogramming

Updating or reprogramming the Body Control Module software.

  • Total: $150 - $400
  • Success rate: 75%
BCM Replacement

Replacing the Body Control Module if it is found to be defective.

  • Total: $300 - $800
  • Success rate: 90%
Money-Saving Tips for B063F
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B063F Diagnosis Process

Follow these systematic steps to accurately diagnose B063F. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion around the BCM (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion around the BCM (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Use the GeekOBD APP to retrieve all codes and freeze frame data, which provides context for the fault (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Use the GeekOBD APP to retrieve all codes and freeze frame data, which provides context for the fault (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Utilize a multimeter to check for proper voltage and ground at the BCM and other related components (20-30 minutes)

Step 3: Component testing - Utilize a multimeter to check for proper voltage and ground at the BCM and other related components (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - After any repairs, verify the proper operation of the BCM and connected systems, then clear the codes (10-15 minutes)

Step 4: System function test - After any repairs, verify the proper operation of the BCM and connected systems, then clear the codes (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to ensure that the B063F code does not reappear and all features function correctly (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to ensure that the B063F code does not reappear and all features function correctly (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: BCM Wiring Repair for a 2017 Ford F-150

Vehicle: 2017 Ford F-150, 55,000 miles

Problem: Customer reported intermittent power window failures and flickering interior lights.

Diagnosis: Initial inspection revealed frayed wiring near the BCM connectors.

Solution: Repaired the damaged wiring and secured the connectors to prevent future issues.

Cost: $150 for labor and parts.

Result: All electrical features functioned properly after the repair, and the B063F code was cleared.

Case Study 2: BCM Replacement on a 2016 Ford F-150

Vehicle: 2016 Ford F-150, 70,000 miles

Problem: Customer experienced complete failure of power locks and interior lights.

Diagnosis: Diagnostic scan revealed B063F code and a faulty BCM.

Solution: Replaced the Body Control Module and reprogrammed it to the vehicle's system.

Cost: $600 including parts and labor.

Result: Post-repair, all systems operated normally, and the customer reported no further issues.

Diagnose B063F

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B063F
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes