B064D - Understanding DTC B064D: Common Issues in 2015-2020 Ford F-150 and Other Models

Quick Answer

B064D means: B064D indicates a malfunction in the headlamp control circuit detected by the BCM.

Fix: Check and replace faulty components Cost: $100 - $300 Time: 90-180 minutes

Can I drive with B064D? Immediate attention is recommended to ensure safe driving conditions.

Common Questions

What does B064D mean and how does it affect my car?

B064D indicates a malfunction within the headlamp control circuit managed by the body control module. This can lead to headlights not functioning properly, which is critical for safe driving, especially at night. Ignoring this issue can result in reduced visibility and increased risk of accidents.

What are the most common causes of B064D and how much does it cost to fix?

Common causes include faulty wiring (40%), defective headlamp bulbs (30%), and a malfunctioning body control module (20%). Repair costs can range from $50 for a bulb replacement to $600 for BCM replacement, depending on the specific issue.

Can I drive my car with B064D or should I stop immediately?

While it may be possible to drive with this code, doing so can be dangerous due to potential headlight failure. It's advisable to address the issue as soon as possible to ensure safety on the road, especially during night driving.

How can I diagnose B064D myself using GeekOBD APP?

Start by using the GeekOBD APP to scan for codes and view freeze frame data. This will give you context on when the code was triggered. Then, inspect the headlamp circuit visually for any obvious issues before conducting further tests with a multimeter.

What vehicles are most commonly affected by B064D?

Vehicles such as the 2015-2020 Ford F-150 and Chevrolet Silverado are frequently affected by DTC B064D due to their electrical systems' similarities. It's important to check for any recalls or technical service bulletins related to this code.

How can I prevent B064D from happening again?

Regular maintenance of your vehicle's electrical system, including inspections of wiring and connections, can help prevent DTC B064D from reoccurring. Additionally, using high-quality replacement parts for any repairs is essential.

What is B064D?

DTC B064D is a diagnostic trouble code that indicates a problem with the body control module (BCM) related to the headlamp control circuit. This code is often triggered when the BCM detects a malfunction in the headlight system, which can include issues with wiring, connectors, or the headlight bulbs themselves. For car owners, this means that your vehicle may experience issues such as headlights not functioning correctly, flickering lights, or even electrical system problems. In practical terms, if this code appears, it may affect nighttime visibility and overall safety when driving. The headlamp control circuit is crucial for ensuring that your headlights operate as intended, thereby impacting your ability to drive safely during low light conditions. Ignoring this code can lead to more extensive electrical problems in your vehicle over time, making it essential to diagnose and repair the issue promptly. Additionally, vehicles like the Ford F-150, Chevrolet Silverado, and other models from 2015 to 2020 may commonly encounter this code due to their similar electrical architecture. Therefore, understanding and addressing DTC B064D is vital for maintaining optimal vehicle performance and safety.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B064D is present:

  • Check engine light stays on constantly, indicating a persistent issue with the headlamp system.
  • Headlights flicker or fail to illuminate correctly, which can occur when driving at night.
  • Dashboard warning messages related to headlamp failure may appear, providing alerts to the driver.
  • Difficulty in using high beams, resulting in limited visibility and increased risk during night driving.
  • Increased electrical draw that may lead to a dead battery if the issue is not resolved, particularly in older vehicles.

Possible Causes

Most common causes of B064D (ordered by frequency):

  1. The most common cause of B064D is faulty wiring or connections in the headlamp circuit, with a likelihood of around 40%. This can happen due to wear and tear or exposure to moisture.
  2. Another significant cause is a defective headlamp bulb or socket, which may fail over time, leading to intermittent light issues. This accounts for about 30% of cases.
  3. A malfunctioning body control module (BCM) can also trigger this code, though this is less common (approximately 20%). Regular software updates and system checks can help prevent this.
  4. A blown fuse associated with the headlamp circuit can lead to light failure, although it is a less common cause, accounting for about 5%. Regular fuse inspections can help avoid this issue.
  5. Rarely, an issue with the vehicle's overall electrical system or grounding problems may lead to B064D, which could require professional evaluation.

B064D Repair Costs

Cost Breakdown by Repair Type

Wiring Repair

Fixing damaged or corroded wiring and connections in the headlamp circuit.

  • Total: $100 - $300
  • Success rate: 85%
Headlight Bulb Replacement

Replacing faulty headlight bulbs or sockets to restore functionality.

  • Total: $50 - $150
  • Success rate: 90%
BCM Replacement

Replacing the body control module if it is found to be defective.

  • Total: $300 - $600
  • Success rate: 75%
Money-Saving Tips for B064D
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B064D Diagnosis Process

Follow these systematic steps to accurately diagnose B064D. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes). Look under the hood and near the headlights for any visible issues.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Use the GeekOBD APP to retrieve all codes and freeze frame data, giving context to the fault (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Use the GeekOBD APP to retrieve all codes and freeze frame data, giving context to the fault (10-15 minutes). This will help you understand when the code was triggered.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter to test the headlamp circuit and related components, including the bulbs and sockets (20-30 minutes)

Step 3: Component testing - Use a multimeter to test the headlamp circuit and related components, including the bulbs and sockets (20-30 minutes). Ensure that you have proper voltage readings.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - After performing repairs or replacements, verify the proper operation of the headlamps and clear codes using the GeekOBD APP (10-15 minutes)

Step 4: System function test - After performing repairs or replacements, verify the proper operation of the headlamps and clear codes using the GeekOBD APP (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm that the headlamps function correctly and that the B064D code does not return (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm that the headlamps function correctly and that the B064D code does not return (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Headlight Malfunction in 2017 Ford F-150

Vehicle: 2017 Ford F-150, 55,000 miles

Problem: Customer reported that the headlights would intermittently flicker and sometimes fail to turn on.

Diagnosis: The diagnostic process indicated B064D with multiple scans showing faulty wiring. Visual inspection revealed corrosion in the headlight connector.

Solution: Repaired the wiring and replaced the corroded connector. Headlight bulbs were also replaced as a precaution.

Cost: $200 for wiring repair and bulb replacement

Result: Post-repair, the headlights functioned perfectly with no return of the B064D code.

Case Study 2: BCM Replacement in 2019 Chevrolet Silverado

Vehicle: 2019 Chevrolet Silverado, 30,000 miles

Problem: Driver experienced complete headlight failure with dashboard warnings indicating B064D.

Diagnosis: After running several tests, it was determined that the body control module was malfunctioning.

Solution: Replaced the BCM and updated the vehicle’s software to ensure proper operation.

Cost: $500 for BCM replacement and software update

Result: The headlights operated normally post-repair, and the B064D code was resolved.

Diagnose B064D

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B064D
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes