B0655 - Understanding DTC B0655: Common Issues in 2010-2022 Ford and Chevrolet Models

Quick Answer

B0655 means: DTC B0655 indicates a malfunction in the seat belt switch circuit related to the body control module.

Fix: Check and replace faulty components Cost: $100 - $200 Time: 90-180 minutes

Can I drive with B0655? Immediate attention is recommended to ensure safety features are operational.

Common Questions

What does B0655 mean and how does it affect my car?

B0655 indicates a fault in the seat belt switch circuit, which can prevent the seat belt system from functioning properly. This could lead to safety warnings and affect the airbag deployment during an accident.

What are the most common causes of B0655 and how much does it cost to fix?

Common causes include a faulty seat belt switch, damaged wiring, or issues with the body control module. Repair costs can range from $80 to $300, depending on the specific issue.

Can I drive my car with B0655 or should I stop immediately?

While you may be able to drive the car, it's not advisable due to potential safety risks. Immediate inspection and repair are recommended to ensure all safety features work correctly.

How can I diagnose B0655 myself using GeekOBD APP?

Using the GeekOBD APP, you can scan for DTCs, access freeze frame data, and monitor the seat belt switch signal to help identify the issue.

What vehicles are most commonly affected by B0655?

Vehicles such as the 2015 Ford F-150 and 2018 Chevrolet Silverado frequently encounter this code, particularly if they have experienced recalls or technical service bulletins related to the seat belt system.

How can I prevent B0655 from happening again?

Regularly inspect your seat belts and wiring for signs of wear, avoid excessive force when using the seat belt, and ensure that your vehicle's electrical system is in good condition to prevent future issues.

What is B0655?

DTC B0655 is a diagnostic trouble code that indicates a problem with the body control module (BCM) related to the vehicle's seat belt system. Specifically, this code signifies that there is an issue with the seat belt switch circuit. When the BCM receives an unexpected signal from the seat belt switch—often due to a malfunctioning switch, damaged wiring, or a faulty BCM—this trouble code is triggered. Real-world implications of B0655 can include the illumination of the check engine light, which might cause concern for drivers as it indicates a potential safety issue. In vehicles like the 2015 Ford F-150 or the 2018 Chevrolet Silverado, this could lead to malfunctioning seat belt indicators, affecting the overall safety features of the car. Ignoring this code can lead to further complications, such as failures in airbag deployment systems, resulting in a significant safety risk during a collision. Therefore, addressing the issue promptly is crucial for ensuring both vehicle safety and compliance with automotive regulations.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B0655 is present:

  • The check engine light remains illuminated, indicating a persistent issue that requires immediate attention.
  • A warning message on the dashboard regarding the seat belt system appears, which may distract the driver and reduce confidence in vehicle safety.
  • The seat belt indicator light may not function properly, leading to uncertainty about whether seat belts are engaged.
  • Inconsistent seat belt chime sounds may occur, signaling a malfunction in the system, which can be distressing for passengers.
  • The vehicle may experience problems with the airbag system, as some vehicles link these systems, potentially compromising safety.

Possible Causes

Most common causes of B0655 (ordered by frequency):

  1. The most common cause of B0655 is a faulty seat belt switch, which accounts for approximately 60% of cases. This switch may become worn out or damaged due to frequent use.
  2. A second common cause is damaged wiring within the seat belt circuit. This can happen due to wear and tear or physical damage from seat movement.
  3. Another cause could be a malfunctioning body control module (BCM), which may require reprogramming or replacement if it's not responding correctly.
  4. A less common but serious cause involves water damage to the BCM, often resulting from leaks in the vehicle's cabin, which can lead to more extensive electrical issues.
  5. In rare cases, a faulty connection at the BCM connector can lead to signal loss, necessitating a thorough inspection to ensure all connections are secure.

B0655 Repair Costs

Cost Breakdown by Repair Type

Seat Belt Switch Replacement

Replacing the faulty seat belt switch typically restores normal function.

  • Total: $100 - $200
  • Success rate: 85%
Body Control Module Reprogramming

Reprogramming the BCM can resolve software-related issues related to B0655.

  • Total: $150 - $300
  • Success rate: 75%
Wiring Repair

Repairing damaged wiring can prevent further issues down the line.

  • Total: $80 - $150
  • Success rate: 70%
Money-Saving Tips for B0655
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B0655 Diagnosis Process

Follow these systematic steps to accurately diagnose B0655. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Perform an initial visual inspection of the seat belt wiring and connectors for any obvious signs of damage or corrosion (5-10 minutes)

Step 1: Perform an initial visual inspection of the seat belt wiring and connectors for any obvious signs of damage or corrosion (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: Use the GeekOBD APP to perform an OBD2 scan to retrieve all diagnostic codes and freeze frame data, giving a broader context of the issue (10-15 minutes)

Step 2: Use the GeekOBD APP to perform an OBD2 scan to retrieve all diagnostic codes and freeze frame data, giving a broader context of the issue (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Conduct component testing on the seat belt switch and related circuits using a multimeter to determine if they are functioning correctly (20-30 minutes)

Step 3: Conduct component testing on the seat belt switch and related circuits using a multimeter to determine if they are functioning correctly (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: Carry out a system function test after any repairs to verify everything operates as expected and clear the codes from the computer (10-15 minutes)

Step 4: Carry out a system function test after any repairs to verify everything operates as expected and clear the codes from the computer (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Complete a road test under various conditions to ensure the issue has been resolved and the vehicle functions properly (15-20 minutes)

Step 5: Complete a road test under various conditions to ensure the issue has been resolved and the vehicle functions properly (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Seat Belt Switch Replacement on 2018 Ford F-150

Vehicle: 2018 Ford F-150, 45,000 miles

Problem: Customer reported the check engine light was on and a warning about the seat belt system was displayed.

Diagnosis: Using the GeekOBD APP, the diagnostic scan revealed code B0655. A visual inspection showed the seat belt switch was worn.

Solution: Replaced the seat belt switch and cleared the codes. The system functioned correctly after the repair.

Cost: $150 (parts and labor included)

Result: Customer was satisfied with the quick repair and confirmed that the warning light was no longer illuminated.

Case Study 2: Wiring Repair on 2015 Chevrolet Silverado

Vehicle: 2015 Chevrolet Silverado, 60,000 miles

Problem: The vehicle exhibited intermittent seat belt indicator warnings and the check engine light was on.

Diagnosis: Diagnostic testing revealed B0655, leading to a thorough inspection of the wiring harness, which showed signs of fraying.

Solution: Repaired the damaged wiring and secured all connections. The system was tested and confirmed operational.

Cost: $100 (including parts and labor)

Result: The issue was resolved, and the customer noted improved reliability without any warning lights.

Diagnose B0655

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B0655
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes