B067F - Understanding the Body Control Module Malfunction in 2016-2020 Ford Fusion and Other Models

Quick Answer

B067F means: B067F indicates a malfunction with the Body Control Module (BCM) affecting various electronic systems.

Fix: Check and replace faulty components Cost: $300 - $800 Time: 90-180 minutes

Can I drive with B067F? Immediate attention is recommended to avoid further complications.

Common Questions

What does B067F mean and how does it affect my car?

The B067F code indicates a malfunction with the Body Control Module, which is crucial for managing electronic systems in your vehicle. This can result in issues like non-functional power windows and locks, dashboard warning lights, and more. Ignoring this code could lead to more significant electrical issues down the line.

What are the most common causes of B067F and how much does it cost to fix?

Common causes of B067F include a faulty Body Control Module, poor wiring connections, and corrosion in connectors. Repair costs can vary widely, from $100 for wiring repairs to $800 for a BCM replacement, depending on the severity of the issue and parts needed.

Can I drive my car with B067F or should I stop immediately?

While you may be able to drive your vehicle, it's advisable to address the B067F code promptly. Continuing to drive with this code can lead to further electrical failures, impacting safety and vehicle performance. It’s best to have it diagnosed as soon as possible.

How can I diagnose B067F myself using GeekOBD APP?

Using the GeekOBD APP, you can connect to your vehicle's OBD2 port, perform a scan to retrieve the B067F code, and analyze freeze frame data for context. This will help you understand the timing and conditions under which the fault occurred, aiding in diagnosis.

What vehicles are most commonly affected by B067F?

The B067F code is commonly found in vehicles like the 2016-2020 Ford Fusion, but it may also appear in other Ford models from the same years. Always check for any manufacturer recalls or technical service bulletins (TSBs) related to BCM issues.

How can I prevent B067F from happening again?

Preventive measures include regular inspections of the vehicle's electrical systems, maintaining clean and secure wiring connections, and using protective coatings on exposed wiring to prevent corrosion.

What is B067F?

The diagnostic trouble code (DTC) B067F indicates an issue related to the Body Control Module (BCM) or the communication between the BCM and other vehicle systems. This code is commonly found in vehicles like the 2016-2020 Ford Fusion, where it may signal a malfunction in the module's ability to manage various electronic components, such as the lighting system, power windows, and door locks. When this code appears, it can lead to several operational issues, including failure of electronic accessories and warning lights illuminating on the dashboard. In practical terms, it means that the BCM is unable to process or relay information correctly, which could impact the overall functionality of your vehicle. If you notice the check engine light or other warning indicators, it's essential to address this issue promptly. Ignoring it may lead to further complications that can be more expensive to fix later on. Regular checks and timely diagnosis using tools like the GeekOBD APP can help catch such issues early, preventing unknown glitches in your car's electronic systems. Addressing B067F may involve software updates, sensor replacements, or occasionally, a complete BCM replacement, depending on the severity of the fault.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B067F is present:

  • The check engine light is illuminated or flashing, indicating a problem that requires immediate attention.
  • Power windows and locks may not function reliably, causing inconvenience and security issues.
  • Dashboard warning lights for various systems may remain on, leading to confusion about the vehicle's health.
  • Intermittent issues with lighting, such as headlights flickering or dashboard lights dimming unexpectedly.
  • Malfunctioning electronic accessories, like radio volume issues or seat adjustments not responding.

Possible Causes

Most common causes of B067F (ordered by frequency):

  1. The most common cause of B067F is a faulty Body Control Module (BCM), which can occur in about 60% of cases. This may be due to electrical shorts, water damage, or software glitches.
  2. Poor wiring connections or damaged harnesses can lead to communication failures between the BCM and other modules, accounting for around 25% of issues.
  3. Corrosion in connectors or terminals can prevent proper electrical flow, leading to intermittent faults in about 10% of cases. Regular maintenance can help prevent this.
  4. Less common but serious causes include a malfunctioning ignition switch or battery issues that can disrupt power to the BCM.
  5. A rare but possible cause includes factory defects in the BCM, which may require a manufacturer recall or service bulletin to address.

B067F Repair Costs

Cost Breakdown by Repair Type

BCM Replacement

Replacing the Body Control Module with a new unit to restore functionality.

  • Total: $300 - $800
  • Success rate: 85%
Wiring Repair

Repairing or replacing damaged wiring or connectors causing communication issues.

  • Total: $100 - $300
  • Success rate: 70%
Money-Saving Tips for B067F
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B067F Diagnosis Process

Follow these systematic steps to accurately diagnose B067F. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Conduct an initial visual inspection of the BCM and related wiring for any visible damage or corrosion (5-10 minutes)

Step 1: Conduct an initial visual inspection of the BCM and related wiring for any visible damage or corrosion (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: Use the GeekOBD APP to perform an OBD2 scan and retrieve all codes and freeze frame data for context (10-15 minutes)

Step 2: Use the GeekOBD APP to perform an OBD2 scan and retrieve all codes and freeze frame data for context (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Test suspected components, such as the BCM and wiring, using a multimeter or specific diagnostic tools (20-30 minutes)

Step 3: Test suspected components, such as the BCM and wiring, using a multimeter or specific diagnostic tools (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: After making repairs, perform a system function test to ensure everything operates correctly and clear any codes (10-15 minutes)

Step 4: After making repairs, perform a system function test to ensure everything operates correctly and clear any codes (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Conduct a road test to verify proper operation under various driving conditions to confirm successful resolution (15-20 minutes)

Step 5: Conduct a road test to verify proper operation under various driving conditions to confirm successful resolution (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: BCM Replacement in a 2018 Ford Fusion

Vehicle: 2018 Ford Fusion, 45,000 miles

Problem: Customer reported non-functioning power windows and frequent dashboard warning lights.

Diagnosis: Initial visual inspection revealed no visible damage, but OBD scan showed B067F code. Further testing confirmed BCM malfunction.

Solution: Replaced the Body Control Module and reprogrammed it to the vehicle.

Cost: $650 (parts: $400, labor: $250)

Result: All electronic functions restored, and no further issues reported.

Case Study 2: Wiring Repair in a 2017 Ford Explorer

Vehicle: 2017 Ford Explorer, 60,000 miles

Problem: Customer experienced intermittent issues with door locks and dashboard lights.

Diagnosis: OBD scan confirmed B067F; visual inspection found corroded connectors.

Solution: Repaired wiring and replaced corroded connectors.

Cost: $150 (parts: $50, labor: $100)

Result: Issues resolved, and no further DTCs appeared.

Diagnose B067F

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B067F
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes