B06CE - Understanding the Body Control Module Code in 2015-2020 Ford Vehicles

Quick Answer

B06CE means: The B06CE code indicates a malfunction in the Body Control Module, affecting various electronic systems.

Fix: Check and replace faulty components Cost: $400 - $800 Time: 90-180 minutes

Can I drive with B06CE? Immediate attention is recommended to prevent further electronic failures.

Common Questions

What does B06CE mean and how does it affect my car?

The B06CE code signifies a malfunction in the Body Control Module, which is essential for managing various electronic systems in your vehicle. If this module fails, you may experience issues like malfunctioning locks, erratic lighting, and unreliable security systems, impacting both convenience and safety.

What are the most common causes of B06CE and how much does it cost to fix?

Common causes of the B06CE code include a faulty Body Control Module, poor electrical connections, and software glitches. Repair costs can range from $100 for wiring repairs to $800 for a complete BCM replacement, depending on the specific issue.

Can I drive my car with B06CE or should I stop immediately?

While you may be able to drive with the B06CE code present, it's advisable to seek immediate attention. Ignoring this code can lead to further electronic failures, compromising your vehicle's safety and functionality.

How can I diagnose B06CE myself using GeekOBD APP?

To diagnose the B06CE code, use the GeekOBD APP to perform an OBD2 scan. This will give you access to all trouble codes and freeze frame data, helping you understand the context of the issue. Look for related codes and perform visual inspections based on the results.

What vehicles are most commonly affected by B06CE?

The B06CE code is frequently reported in 2015-2020 Ford vehicles, including models like the Ford Edge, Explorer, and F-150. Be sure to check for any recalls or Technical Service Bulletins (TSBs) related to the BCM for your specific vehicle.

How can I prevent B06CE from happening again?

To prevent the B06CE code from recurring, regularly inspect your vehicle's wiring and connectors for wear or corrosion. Additionally, ensure your software is up to date and consider routine maintenance checks to catch potential issues early.

What is B06CE?

The Diagnostic Trouble Code (DTC) B06CE indicates an issue with the Body Control Module (BCM) in vehicles, particularly those from Ford manufactured between 2015 and 2020. The BCM is critical as it manages various electronic systems in your car, including lighting, security, and door locking mechanisms. When the B06CE code appears, it typically signifies that the BCM is experiencing a malfunction or is unable to communicate effectively with other vehicle systems. This can lead to a range of problems, such as erratic behavior of electrical components, failed locks, or malfunctioning lights, which can not only affect your vehicle's functionality but also your safety on the road. If left unresolved, the malfunction could escalate, potentially leading to more expensive repairs. Real-world implications include inconvenience, as you may find that your vehicle's electronic features do not operate correctly, and safety concerns if systems like the security features fail when you need them the most. Addressing the B06CE code early is crucial to maintaining your vehicle's reliability and safety.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B06CE is present:

  • The check engine light remains illuminated, indicating a persistent issue with the BCM.
  • Door locks may operate erratically, failing to lock or unlock correctly when prompted.
  • Interior and exterior lights may flicker or fail to illuminate, impacting visibility and safety.
  • The vehicle's security system may trigger unexpectedly, causing alarm disturbances.
  • Dashboard warning lights may activate erratically, indicating potential BCM communication errors.

Possible Causes

Most common causes of B06CE (ordered by frequency):

  1. {'description': 'The most common cause of the B06CE code is a faulty Body Control Module, occurring in approximately 60% of cases. Issues can arise from electrical shorts, water damage, or internal failure.', 'likelihood': '60%'}
  2. {'description': 'The second most common cause is poor electrical connections or wiring issues, including corroded connectors or damaged wires, which can disrupt communication between the BCM and other systems.', 'likelihood': '25%'}
  3. {'description': 'In some instances, software glitches or outdated firmware in the BCM can cause this code. Regular updates and software diagnostics can help prevent this.', 'likelihood': '10%'}
  4. {'description': 'Less common but serious causes include physical damage to the BCM from accidents or environmental exposure, which can lead to complete BCM failure.', 'likelihood': '3%'}
  5. {'description': 'A rare cause could be issues with other control modules miscommunicating with the BCM, leading to confusion in system responses and triggering the B06CE code.', 'likelihood': '2%'}

B06CE Repair Costs

Cost Breakdown by Repair Type

BCM Replacement

Replacing the faulty Body Control Module with a new unit.

  • Total: $400 - $800
  • Success rate: 95%
Wiring Repair

Repairing any damaged wiring or connectors related to the BCM.

  • Total: $100 - $300
  • Success rate: 80%
Money-Saving Tips for B06CE
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B06CE Diagnosis Process

Follow these systematic steps to accurately diagnose B06CE. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Perform an initial visual inspection of the BCM and surrounding wiring for any obvious signs of damage or corrosion (5-10 minutes)

Step 1: Perform an initial visual inspection of the BCM and surrounding wiring for any obvious signs of damage or corrosion (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: Use the GeekOBD APP to conduct an OBD2 scan, retrieving all trouble codes and freeze frame data for context on the B06CE occurrence (10-15 minutes)

Step 2: Use the GeekOBD APP to conduct an OBD2 scan, retrieving all trouble codes and freeze frame data for context on the B06CE occurrence (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Test suspected components using a multimeter to check voltage and ground signal integrity, focusing on the BCM and its connections (20-30 minutes)

Step 3: Test suspected components using a multimeter to check voltage and ground signal integrity, focusing on the BCM and its connections (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: Conduct a system function test to ensure the BCM operates correctly after any repairs and clear the codes (10-15 minutes)

Step 4: Conduct a system function test to ensure the BCM operates correctly after any repairs and clear the codes (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test the vehicle under various conditions to validate the repair success and ensure all systems are functioning normally (15-20 minutes)

Step 5: Road test the vehicle under various conditions to validate the repair success and ensure all systems are functioning normally (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: BCM Replacement in a 2018 Ford F-150

Vehicle: 2018 Ford F-150, 45,000 miles

Problem: Customer reported that the vehicle's door locks were malfunctioning, and the check engine light was on.

Diagnosis: An OBD2 scan revealed the B06CE code. Visual inspection showed corrosion on the BCM connectors.

Solution: Replaced the Body Control Module and cleaned the connectors.

Cost: $650 (parts $500, labor $150)

Result: The vehicle's door locks and lighting systems functioned properly post-repair, and the check engine light was cleared.

Case Study 2: Electrical Issue Resolution on a 2019 Ford Edge

Vehicle: 2019 Ford Edge, 30,000 miles

Problem: Customer experienced flickering interior lights and random alarm triggers.

Diagnosis: B06CE code was retrieved, and further testing revealed a wiring issue leading to poor BCM connectivity.

Solution: Repaired the wiring harness that connects to the BCM.

Cost: $250 (parts $50, labor $200)

Result: All electrical systems returned to normal operation, with no further issues reported after follow-up.

Diagnose B06CE

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B06CE
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes