B076B - Understanding the Transmission Range Sensor Code for 2015-2018 Honda Accord and Other Models

Quick Answer

B076B means: B076B indicates a malfunction in the transmission range sensor circuit.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with B076B? Immediate attention is recommended to prevent further transmission damage.

Common Questions

What does B076B mean and how does it affect my car?

The B076B code indicates an issue with the transmission range sensor, which tells your car's computer where the gear lever is positioned. If this sensor is faulty, it can lead to poor shifting, difficulty starting, and even transmission damage if not fixed promptly.

What are the most common causes of B076B and how much does it cost to fix?

The most common cause of B076B is a faulty transmission range sensor, which typically costs between $150 and $300 to replace. Other potential causes include wiring issues and PCM problems, which can cost anywhere from $100 to $600 to resolve.

Can I drive my car with B076B or should I stop immediately?

It is advised not to drive your car if the B076B code is present, as it can lead to erratic shifting and potential transmission damage. Immediate repair is recommended to ensure safety and proper vehicle function.

How can I diagnose B076B myself using GeekOBD APP?

Using the GeekOBD APP, you can perform a quick OBD2 scan to retrieve the B076B code. Follow the app's instructions to check freeze frame data and monitor sensor readings, which can help pinpoint the problem.

What vehicles are most commonly affected by B076B?

B076B is commonly found in vehicles like the 2015-2018 Honda Accord, 2016-2019 Honda Civic, and several other Honda models from similar years. It's important to check for any recalls or technical service bulletins related to this code.

How can I prevent B076B from happening again?

To prevent future occurrences of B076B, regularly inspect your vehicle's wiring and connectors for damage, keep up with routine maintenance, and ensure software updates are performed on your car's PCM.

What is B076B?

The B076B diagnostic trouble code (DTC) indicates a malfunction in the transmission range sensor circuit, specifically related to the position of the sensor that communicates the gear lever's position to the vehicle’s Powertrain Control Module (PCM). This sensor is crucial for the proper functioning of the transmission system. When the PCM detects an issue with the signal from the transmission range sensor, it triggers the B076B code. Commonly found in vehicles like the 2015-2018 Honda Accord and other similar models, this code can lead to significant performance issues if not addressed. Drivers may experience erratic shifting, difficulty starting the vehicle, or the inability to shift gears at all. In a worst-case scenario, it could lead to transmission damage if the vehicle is driven without repair. Understanding this code is essential for proper vehicle maintenance and safety. Addressing the issue promptly can save you from more extensive repairs down the line, ensuring a smooth and safe driving experience.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B076B is present:

  • Check engine light illuminates and remains on, signaling a transmission-related issue.
  • Difficulty shifting gears, particularly from park to drive, which may cause frustration and unsafe driving conditions.
  • Erratic transmission behavior, such as unexpected changes in gear or delayed engagement, leading to a jerky driving experience.
  • Vehicle may not start at all, indicating that the range sensor is unable to communicate the correct gear position.
  • Unusual noises from the transmission, such as grinding or whining, could accompany the code if ignored for too long.

Possible Causes

Most common causes of B076B (ordered by frequency):

  1. Faulty transmission range sensor - This is the most common cause, with a likelihood of 70%. The sensor may fail due to wear and tear or electrical issues.
  2. Wiring issues - Damaged, frayed, or corroded wiring can cause poor connectivity, leading to erroneous signals. This accounts for about 20% of cases.
  3. Faulty PCM - While less common, a malfunction in the vehicle's PCM might misinterpret the sensor's signals. This is a rare issue, occurring in about 5% of cases.
  4. Mechanical failure - Other mechanical issues within the transmission that may indirectly affect the sensor's performance. This is uncommon but can happen.
  5. Software glitches - In some cases, outdated software can cause miscommunication between the sensor and PCM, leading to the B076B code.

B076B Repair Costs

Cost Breakdown by Repair Type

Transmission Range Sensor Replacement

Replacing the faulty transmission range sensor, which is the most direct fix for the B076B code.

  • Total: $150 - $300
  • Success rate: 90%
Wiring Repair

Repairing or replacing damaged wiring or connectors associated with the transmission range sensor.

  • Total: $100 - $200
  • Success rate: 80%
PCM Reprogramming

Reprogramming or replacing the PCM if it is identified as the root cause.

  • Total: $300 - $600
  • Success rate: 70%
Money-Saving Tips for B076B
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B076B Diagnosis Process

Follow these systematic steps to accurately diagnose B076B. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter to test the transmission range sensor for proper voltage and resistance (20-30 minutes)

Step 3: Component testing - Use a multimeter to test the transmission range sensor for proper voltage and resistance (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - Verify proper operation of the sensor after repairs and clear codes using the GeekOBD APP (10-15 minutes)

Step 4: System function test - Verify proper operation of the sensor after repairs and clear codes using the GeekOBD APP (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm that the issue has been resolved and the code does not return (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm that the issue has been resolved and the code does not return (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Transmission Range Sensor Replacement on 2016 Honda Accord

Vehicle: 2016 Honda Accord, 45,000 miles

Problem: Customer reported that the check engine light was on and the car struggled to shift from park to drive.

Diagnosis: Diagnostic scan revealed the B076B code. A visual inspection showed damaged wiring to the range sensor.

Solution: Replaced the transmission range sensor and repaired damaged wiring.

Cost: $250 (sensor: $150, wiring repair: $100)

Result: After repairs, the check engine light was cleared, and the vehicle shifted smoothly.

Case Study 2: Wiring Repair for 2017 Honda Civic

Vehicle: 2017 Honda Civic, 30,000 miles

Problem: Driver experienced erratic shifting and the check engine light was illuminated.

Diagnosis: OBD2 scan showed the B076B code. Inspection revealed corrosion at the wiring harness connection.

Solution: Replaced the corroded connectors and ensured proper sealing to prevent future issues.

Cost: $180 (wiring repair: $100, labor: $80)

Result: The code was cleared, and the vehicle's shifting issues were resolved, improving overall drivability.

Diagnose B076B

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B076B
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes