B0771 - Airbag Sensor Fault in Popular Models Like Honda Accord and Toyota Camry

Quick Answer

B0771 means: B0771 indicates a fault in the airbag sensor circuit, which can prevent airbags from deploying in a crash.

Fix: Check and replace faulty components Cost: $100 - $300 Time: 90-180 minutes

Can I drive with B0771? Immediate attention is recommended to ensure the safety system is functioning properly.

Common Questions

What does B0771 mean and how does it affect my car?

B0771 indicates an issue with the airbag sensor circuit, meaning your airbag system may not deploy in the event of an accident. This significantly compromises safety and should be addressed immediately.

What are the most common causes of B0771 and how much does it cost to fix?

Common causes include damaged wiring (40% likelihood) and faulty sensors, with repair costs ranging from $100 to $600 depending on the issue. Always consult a professional for accurate diagnostics.

Can I drive my car with B0771 or should I stop immediately?

It is highly advised to stop driving the vehicle immediately, as the airbag system may not activate during a crash, increasing the risk of severe injury.

How can I diagnose B0771 myself using GeekOBD APP?

Using the GeekOBD APP, conduct an OBD2 scan to retrieve the codes. Look for freeze frame data to understand the context of the fault, and follow the diagnostic steps for further investigation.

What vehicles are most commonly affected by B0771?

B0771 is frequently found in vehicles such as the 2015-2019 Honda Accord, 2016-2020 Toyota Camry, and other models with similar airbag systems. Always check for any recalls related to your specific make and model.

How can I prevent B0771 from happening again?

Regular maintenance checks, ensuring proper handling of wiring and connectors, and avoiding modifications that could disturb the airbag system can help prevent future occurrences of B0771.

What is B0771?

The Diagnostic Trouble Code (DTC) B0771 refers to a fault in the airbag system, specifically related to the airbag sensor's circuit. This code indicates that the airbag control module has detected an issue with the sensor responsible for monitoring the airbag deployment status. When this code appears, it usually means that the airbag light on your dashboard will be illuminated, signaling a malfunction in the airbag system. This can affect the safety features of your vehicle, as the airbags may not deploy in the event of a collision, putting drivers and passengers at risk. Commonly found in vehicles like the 2015-2019 Honda Accord and 2016-2020 Toyota Camry, this issue can arise due to various factors such as damaged wiring, faulty sensors, or even issues in the airbag control module itself. Ignoring this DTC can lead to severe safety implications, as the airbag system is critical for protecting occupants in a crash. Therefore, addressing the B0771 code promptly is essential for maintaining vehicle safety and ensuring that all safety features are operational.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B0771 is present:

  • The airbag warning light is illuminated on the dashboard, indicating a malfunction in the airbag system.
  • Unusual clicking sounds may occur from the dashboard area when the vehicle is in motion, hinting at electronic issues.
  • Driver may notice that the airbags do not deploy during a controlled test (if applicable, but never conduct this test under unsafe conditions).
  • The vehicle may experience intermittent electrical issues, such as dashboard lights flickering or loss of power to other components.
  • In some cases, the seat belt tensioners may not function properly, which can lead to inadequate protection during an accident.

Possible Causes

Most common causes of B0771 (ordered by frequency):

  1. The most common cause is damaged wiring in the airbag circuit, which has a likelihood of around 40%. This can occur due to wear and tear or accidents.
  2. Another frequent issue is a faulty airbag sensor, which is responsible for detecting collision forces and can fail due to age or manufacturing defects.
  3. Corrosion at the connectors and terminals can also lead to erroneous signals being sent to the airbag control unit, emphasizing the importance of regular inspections.
  4. Less commonly, the airbag control module itself may become defective, which can severely hinder the airbag system's performance and reliability.
  5. In rare cases, software issues in the vehicle's onboard computer can trigger the B0771 code, requiring a software update or reprogramming.

B0771 Repair Costs

Cost Breakdown by Repair Type

Wiring Repair

Repair or replace damaged wiring in the airbag circuit.

  • Total: $100 - $300
  • Success rate: 85%
Airbag Sensor Replacement

Replacing a faulty airbag sensor to restore functionality.

  • Total: $150 - $400
  • Success rate: 90%
Airbag Control Module Replacement

Replacing the airbag control module if it is defective.

  • Total: $300 - $600
  • Success rate: 95%
Money-Saving Tips for B0771
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B0771 Diagnosis Process

Follow these systematic steps to accurately diagnose B0771. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter or specific diagnostic tools to test the suspected airbag sensors and wiring (20-30 minutes)

Step 3: Component testing - Use a multimeter or specific diagnostic tools to test the suspected airbag sensors and wiring (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - Verify proper operation after repairs and clear codes using the GeekOBD APP (10-15 minutes)

Step 4: System function test - Verify proper operation after repairs and clear codes using the GeekOBD APP (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm the repair success and ensure the airbag light does not reappear (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm the repair success and ensure the airbag light does not reappear (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: 2008 Honda Accord Airbag Sensor Replacement

Vehicle: 2008 Honda Accord, 120,000 miles

Problem: Customer noticed the airbag light was on constantly.

Diagnosis: After scanning with GeekOBD APP, B0771 was identified. A visual inspection revealed damaged wiring.

Solution: Replaced the damaged wiring and verified the airbag system functioned correctly post-repair.

Cost: $250 (including parts and labor)

Result: The airbag light turned off, and the customer was reassured that the airbag system was operational.

Case Study 2: 2017 Toyota Camry Airbag Control Module Failure

Vehicle: 2017 Toyota Camry, 80,000 miles

Problem: Customer reported intermittent airbag warning light.

Diagnosis: GeekOBD APP indicated B0771. Further testing confirmed a faulty control module.

Solution: Replaced the airbag control module, which resolved the issue.

Cost: $500 (specific cost breakdown: $400 for the module and $100 for labor)

Result: The airbag system was fully functional after the repair, with no warning lights present.

Diagnose B0771

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B0771
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes