B0775 - Understanding DTC B0775: Common Issues in 2010-2015 Chevrolet Equinox and GMC Terrain

Quick Answer

B0775 means: B0775 indicates a malfunction in the transmission range sensor circuit.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with B0775? Immediate diagnosis recommended to prevent further transmission issues.

Common Questions

What does B0775 mean and how does it affect my car?

B0775 indicates a problem with the transmission range sensor circuit, which can lead to difficulties in shifting gears and may affect your vehicle's safety and drivability. Ignoring this code can result in more severe transmission issues if not addressed promptly.

What are the most common causes of B0775 and how much does it cost to fix?

Common causes include a faulty transmission range sensor, damaged wiring, or contaminated transmission fluid. Repair costs range from $100 to $300 depending on the issue and parts needed.

Can I drive my car with B0775 or should I stop immediately?

It's advisable to avoid driving your vehicle if the B0775 code is present. Continuing to drive can exacerbate transmission problems and lead to unsafe driving conditions.

How can I diagnose B0775 myself using GeekOBD APP?

Using the GeekOBD APP, connect to your vehicle's OBD2 port and run a diagnostic scan. Check for the B0775 code and view freeze frame data to understand the context of the issue. This can help you determine if immediate action is needed.

What vehicles are most commonly affected by B0775?

Vehicles like the 2010-2015 Chevrolet Equinox and GMC Terrain frequently experience the B0775 code due to their transmission range sensor design. Always check for any recalls or technical service bulletins related to your specific model.

How can I prevent B0775 from happening again?

Regular maintenance, including timely transmission fluid changes and routine inspections of the transmission wiring, can help prevent the recurrence of B0775. Additionally, using high-quality replacement parts during repairs can enhance system reliability.

What is B0775?

DTC B0775 is a diagnostic trouble code that pertains to a malfunction in the transmission range sensor circuit, commonly found in vehicles like the 2010-2015 Chevrolet Equinox and GMC Terrain. This code indicates that the transmission control module (TCM) has detected an issue with the signal from the transmission range switch, which is responsible for indicating the gear position of the vehicle. When the TCM receives inconsistent or erroneous signals, it triggers the B0775 code. The implications of this code can range from minor inconveniences, such as difficulty shifting gears, to more severe problems that could affect the vehicle's drivability and safety. If left unaddressed, B0775 can lead to transmission damage, reduced fuel efficiency, and potential stalling. For car owners, understanding this code is crucial as it may signal the need for immediate attention to avoid costly repairs down the line. Regular diagnostics using tools like the GeekOBD APP can help monitor transmission performance and catch issues early, making it easier to maintain your vehicle's reliability and longevity.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B0775 is present:

  • Check engine light remains illuminated, indicating an ongoing issue with the transmission range sensor.
  • Shifting difficulties where the vehicle hesitates or refuses to engage in gear, leading to an unsafe driving experience.
  • Unexpected engine stalling or inability to start the engine, which can occur if the TCM cannot detect the correct gear position.
  • Decreased fuel efficiency, as the transmission may not shift at optimal points, leading to higher fuel consumption.
  • Unusual transmission noises, such as grinding or clunking, which may indicate underlying issues with the transmission system.

Possible Causes

Most common causes of B0775 (ordered by frequency):

  1. The most common cause of B0775 is a faulty transmission range sensor, accounting for about 60% of cases. This sensor can wear out over time or become damaged due to environmental factors.
  2. Another prevalent cause is damaged wiring or connectors in the transmission range sensor circuit. This can lead to intermittent connections, causing erratic signaling to the TCM.
  3. Contaminated transmission fluid can also contribute to this code, as it may affect the performance of the transmission system. Regular maintenance and fluid changes can help prevent this issue.
  4. In rare cases, a malfunctioning TCM could be the root cause, leading to incorrect readings from the transmission range sensor.
  5. Lastly, software glitches in the vehicle’s control module could trigger this code, necessitating an update or reprogramming.

B0775 Repair Costs

Cost Breakdown by Repair Type

Transmission Range Sensor Replacement

Replacement of the faulty transmission range sensor with a new OEM part.

  • Total: $150 - $300
  • Success rate: 90%
Wiring Repair

Repairing any damaged wiring or connectors in the transmission range sensor circuit.

  • Total: $100 - $250
  • Success rate: 85%
Transmission Fluid Flush

Flushing and replacing contaminated transmission fluid to improve overall performance.

  • Total: $120 - $200
  • Success rate: 75%
Money-Saving Tips for B0775
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B0775 Diagnosis Process

Follow these systematic steps to accurately diagnose B0775. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Conduct an initial visual inspection to check for damaged wiring, loose connections, or corrosion in the transmission range sensor circuit

Step 1: Conduct an initial visual inspection to check for damaged wiring, loose connections, or corrosion in the transmission range sensor circuit. This should take about 5-10 minutes.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: Use the GeekOBD APP to perform an OBD2 scan, retrieving all codes and freeze frame data for context

Step 2: Use the GeekOBD APP to perform an OBD2 scan, retrieving all codes and freeze frame data for context. This can take approximately 10-15 minutes.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Perform component testing on the transmission range sensor using a multimeter to measure voltage and resistance as per manufacturer specifications

Step 3: Perform component testing on the transmission range sensor using a multimeter to measure voltage and resistance as per manufacturer specifications. Expect to spend 20-30 minutes on this step.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: Conduct a system function test after any repairs to ensure the transmission operates correctly and clear any fault codes

Step 4: Conduct a system function test after any repairs to ensure the transmission operates correctly and clear any fault codes. This process should take around 10-15 minutes.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test the vehicle under various conditions to confirm the success of the repair and ensure that the issue does not reoccur

Step 5: Road test the vehicle under various conditions to confirm the success of the repair and ensure that the issue does not reoccur. Allocate about 15-20 minutes for this.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Transmission Range Sensor Replacement in 2012 Chevrolet Equinox

Vehicle: 2012 Chevrolet Equinox, 85,000 miles

Problem: Customer reported the check engine light was on and experienced shifting difficulties.

Diagnosis: After scanning with the GeekOBD APP, B0775 was confirmed. A visual inspection revealed a damaged transmission range sensor.

Solution: Replaced the transmission range sensor and conducted a system function test.

Cost: $250 (part $150, labor $100)

Result: The check engine light was cleared, and the vehicle shifted smoothly post-repair.

Case Study 2: Wiring Repair for B0775 in 2014 GMC Terrain

Vehicle: 2014 GMC Terrain, 60,000 miles

Problem: The vehicle would not shift out of park, and the check engine light was illuminated.

Diagnosis: OBD2 scan revealed B0775. Inspection showed frayed wiring in the transmission range sensor circuit.

Solution: Repaired the damaged wiring and secured all connections.

Cost: $180 (part $30, labor $150)

Result: The vehicle operated normally, and the issue was resolved without further problems.

Diagnose B0775

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B0775
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes