B0783 - Transmission Range Sensor Circuit High Input: Common in 2015-2018 Honda Accord and Other Makes

Quick Answer

B0783 means: B0783 indicates a high input from the transmission range sensor circuit, affecting shifting and overall transmission performance.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with B0783? Immediate attention is recommended to avoid further transmission issues.

Common Questions

What does B0783 mean and how does it affect my car?

The B0783 code indicates a problem with the transmission range sensor circuit, which communicates the current gear position to the ECU. If this sensor is malfunctioning, your vehicle may not shift gears correctly, leading to performance issues, including rough shifting and potential safety hazards.

What are the most common causes of B0783 and how much does it cost to fix?

The most common causes of B0783 include a faulty transmission range sensor (around $150-$300) and damaged wiring or connectors (around $50-$150). Regular maintenance can help prevent these issues.

Can I drive my car with B0783 or should I stop immediately?

While you may be able to drive for a short distance with caution, it is not advisable to ignore the B0783 code. Continuing to drive could lead to more serious transmission problems and increased repair costs.

How can I diagnose B0783 myself using GeekOBD APP?

To diagnose B0783, connect the GeekOBD APP to your vehicle's OBD2 port. Retrieve and review the trouble codes and freeze frame data, focusing on the B0783 code. Follow up with a visual inspection of the transmission range sensor and its wiring.

What vehicles are most commonly affected by B0783?

B0783 is frequently reported in vehicles like the 2015-2018 Honda Accord, Toyota Camry from 2016-2020, and some Ford models from 2015-2019. Check for recalls or technical service bulletins related to transmission issues in your vehicle.

How can I prevent B0783 from happening again?

To prevent B0783, ensure regular maintenance checks on your vehicle's electrical systems, keep the transmission fluid at proper levels, and inspect the transmission range sensor during routine service intervals.

What is B0783?

The diagnostic trouble code (DTC) B0783 refers to an issue with the transmission range sensor circuit, which is responsible for relaying the position of the gear shift to the engine control unit (ECU). This code typically indicates that the sensor is reporting a high voltage input that is outside the expected range. In practical terms, this can lead to various driving issues, including the vehicle not shifting properly, experiencing erratic behavior in automatic transmission, or even failing to start. For car owners, this means that if the transmission range sensor is malfunctioning, it may hinder the vehicle's ability to shift gears smoothly, resulting in a rough or unsafe driving experience. Ignoring this code can lead to further complications, such as transmission wear and tear, and could potentially lead to costly repairs down the line. If you own a Honda Accord from 2015 to 2018, or other vehicles with similar transmission systems, it’s essential to address this issue promptly to maintain optimal vehicle performance and safety.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B0783 is present:

  • The check engine light remains illuminated constantly, indicating a persistent issue that needs addressing.
  • You may notice erratic shifting patterns; for example, your vehicle might hesitate or slam into gears unexpectedly.
  • Fuel economy could be significantly affected, with reports of a 10-20% decrease in efficiency due to improper gear engagement.
  • Your vehicle may experience difficulty starting, particularly if the transmission range sensor fails to confirm the correct gear position.
  • In some cases, the transmission may enter 'limp mode', restricting performance to prevent further damage.

Possible Causes

Most common causes of B0783 (ordered by frequency):

  1. The most common cause of the B0783 code is a faulty transmission range sensor, which accounts for about 60% of cases. This sensor can wear out over time due to exposure to heat and vibration.
  2. Another frequent cause can be poor electrical connections or damaged wiring leading to the sensor, contributing to around 30% of incidents. This can happen due to corrosion or physical damage.
  3. Preventive maintenance such as regular inspections and cleaning of electrical connections can help prevent issues with the transmission range sensor.
  4. Less common but serious causes include internal transmission failure, such as a failing control module, which may require extensive repairs or even complete transmission replacement.
  5. A rare but possible cause could be software issues within the vehicle's ECU, which might need a reprogramming or update to fix the problem.

B0783 Repair Costs

Cost Breakdown by Repair Type

Transmission Range Sensor Replacement

Replacing the faulty transmission range sensor with a new OEM part.

  • Total: $150 - $300
  • Success rate: 85%
Wiring Repair

Repairing or replacing damaged wiring or connectors leading to the transmission range sensor.

  • Total: $50 - $150
  • Success rate: 75%
Money-Saving Tips for B0783
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B0783 Diagnosis Process

Follow these systematic steps to accurately diagnose B0783. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Start with a visual inspection of the transmission range sensor and its wiring for any obvious signs of damage or corrosion (5-10 minutes)

Step 1: Start with a visual inspection of the transmission range sensor and its wiring for any obvious signs of damage or corrosion (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: Use an OBD2 scanner, like the GeekOBD APP, to retrieve all stored trouble codes and freeze frame data to understand the context of the fault (10-15 minutes)

Step 2: Use an OBD2 scanner, like the GeekOBD APP, to retrieve all stored trouble codes and freeze frame data to understand the context of the fault (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Conduct component testing on the transmission range sensor using a multimeter to check for correct voltage levels and continuity (20-30 minutes)

Step 3: Conduct component testing on the transmission range sensor using a multimeter to check for correct voltage levels and continuity (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: Perform a system function test after making repairs to ensure everything is operating correctly, then clear the codes (10-15 minutes)

Step 4: Perform a system function test after making repairs to ensure everything is operating correctly, then clear the codes (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Take the vehicle for a road test to confirm that the issue has been resolved and the transmission is shifting properly under various driving conditions (15-20 minutes)

Step 5: Take the vehicle for a road test to confirm that the issue has been resolved and the transmission is shifting properly under various driving conditions (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Transmission Range Sensor Replacement in 2016 Honda Accord

Vehicle: 2016 Honda Accord, 45,000 miles

Problem: Customer reported erratic shifting and check engine light on.

Diagnosis: After running diagnostics, the B0783 code was confirmed. Visual inspection revealed a damaged transmission range sensor.

Solution: Replaced the transmission range sensor and repaired wiring connections.

Cost: $220 (sensor $180, labor $40)

Result: Post-repair, the vehicle shifted smoothly and the check engine light was cleared.

Case Study 2: Wiring Repair in 2018 Toyota Camry

Vehicle: 2018 Toyota Camry, 30,000 miles

Problem: Customer complained of starting issues and check engine light.

Diagnosis: B0783 code was detected; wiring to the transmission range sensor was found corroded.

Solution: Repaired the damaged wiring and cleaned connectors.

Cost: $100 (labor $50, parts $50)

Result: After repairs, the vehicle started normally and shifted without issues.

Diagnose B0783

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B0783
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes