B0793 - Understanding DTC B0793: Common in 2015-2018 Honda Accord and Other Models

Quick Answer

B0793 means: B0793 indicates a malfunction in the transmission range sensor, affecting gear shifting.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with B0793? Immediate attention is recommended to prevent transmission damage.

Common Questions

What does B0793 mean and how does it affect my car?

The B0793 code indicates an issue with the transmission range sensor, which determines the position of your vehicle's transmission. This can affect shifting, leading to poor performance and potential transmission failure if left unaddressed.

What are the most common causes of B0793 and how much does it cost to fix?

Common causes include a faulty transmission range sensor, damaged wiring, or improper installation. Repair costs typically range from $150 to $300 for sensor replacement, while wiring repairs can cost between $100 and $200.

Can I drive my car with B0793 or should I stop immediately?

Driving with a B0793 code is not recommended as it can lead to severe transmission issues. If you notice symptoms like difficulty shifting or strange noises, it's best to stop driving and have the vehicle diagnosed.

How can I diagnose B0793 myself using GeekOBD APP?

Using the GeekOBD APP, scan for trouble codes and freeze frame data, which will help you understand the context of the issue. Check for additional DTCs that may provide more insight into the problem.

What vehicles are most commonly affected by B0793?

The B0793 code is frequently seen in models like the Honda Accord (2015-2018) and Toyota Camry (2014-2017). These vehicles may have known issues with their transmission systems that warrant attention.

How can I prevent B0793 from happening again?

Regular maintenance of your vehicle's transmission system, including fluid changes and inspections, can help prevent the occurrence of B0793. Ensure that any repairs are performed correctly to avoid installation issues.

What is B0793?

The diagnostic trouble code (DTC) B0793 indicates a problem with the transmission control system, specifically related to the transmission range sensor or the gear position sensor. This sensor plays a vital role in determining the current gear position of your vehicle's transmission, ensuring that the engine and transmission can communicate effectively. When the B0793 code is triggered, it typically means that the transmission range sensor has detected an issue, which can prevent the vehicle from shifting properly. Drivers may notice issues such as difficulty changing gears, unexpected shifts, or even the vehicle not starting at all. Ignoring this code can lead to more severe transmission problems over time, impacting the vehicle's overall performance and reliability. Additionally, you may experience a check engine light illuminated on your dashboard, signaling that a service is needed. If you own a 2015-2018 Honda Accord, Toyota Camry, or similar models, being aware of this code can be crucial, as it signals a need for immediate attention to prevent potential long-term damage to your vehicle's transmission system.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B0793 is present:

  • The check engine light stays on constantly, indicating a persistent issue with the transmission.
  • Drivers may experience difficulty in shifting gears, leading to a jerky or unresponsive transmission during acceleration.
  • Fuel economy may decrease significantly, with many drivers reporting drops of 10-15% due to improper transmission function.
  • In some cases, the vehicle may not start at all, particularly if the transmission range sensor is faulty.
  • There may be unusual noises coming from the transmission area, such as grinding or whining sounds during gear changes.

Possible Causes

Most common causes of B0793 (ordered by frequency):

  1. The most common cause of the B0793 code is a faulty transmission range sensor, with a likelihood of around 60%. This sensor can wear out over time, especially in older vehicles or those with high mileage.
  2. A second cause could be damaged wiring or connectors leading to the transmission range sensor, which can affect signal transmission. This is often due to corrosion or wear and tear.
  3. Thirdly, improper installation of the transmission range sensor can lead to misalignment, causing the sensor to read incorrectly. Regular inspection during repairs can help prevent this.
  4. Less common but serious issues include a malfunctioning transmission control module, which can result in a complete failure of the transmission system if not addressed promptly.
  5. Rarely, a software glitch in the vehicle's engine control unit (ECU) may lead to a false B0793 code, necessitating a software update or reprogramming.

B0793 Repair Costs

Cost Breakdown by Repair Type

Transmission Range Sensor Replacement

Replacing the faulty transmission range sensor to restore proper function.

  • Total: $150 - $300
  • Success rate: 85%
Wiring Repair

Repairing or replacing damaged wiring or connectors related to the transmission range sensor.

  • Total: $100 - $200
  • Success rate: 75%
Money-Saving Tips for B0793
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B0793 Diagnosis Process

Follow these systematic steps to accurately diagnose B0793. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs such as damaged wiring, loose connections, or corrosion around the transmission range sensor (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs such as damaged wiring, loose connections, or corrosion around the transmission range sensor (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Use the app to retrieve all codes and freeze frame data to understand the fault context, helping pinpoint the issue (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Use the app to retrieve all codes and freeze frame data to understand the fault context, helping pinpoint the issue (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Utilize a multimeter or specific diagnostic tools to test the transmission range sensor and its connections for proper voltage and resistance (20-30 minutes)

Step 3: Component testing - Utilize a multimeter or specific diagnostic tools to test the transmission range sensor and its connections for proper voltage and resistance (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - After performing repairs, verify proper operation by clearing the codes and checking if the vehicle shifts smoothly (10-15 minutes)

Step 4: System function test - After performing repairs, verify proper operation by clearing the codes and checking if the vehicle shifts smoothly (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to ensure the repair has resolved the issue and that the transmission operates normally (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to ensure the repair has resolved the issue and that the transmission operates normally (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Transmission Range Sensor Replacement on 2016 Honda Accord

Vehicle: 2016 Honda Accord, 75,000 miles

Problem: Customer reported difficulty in shifting gears and a persistent check engine light.

Diagnosis: After scanning with the GeekOBD APP, the B0793 code was identified, and a visual inspection revealed a faulty transmission range sensor.

Solution: The technician replaced the transmission range sensor, reconnected all wiring, and cleared the codes.

Cost: $250 (sensor: $150, labor: $100)

Result: The customer reported smooth shifting and no further issues after the repair.

Case Study 2: Wiring Repair on 2017 Toyota Camry

Vehicle: 2017 Toyota Camry, 50,000 miles

Problem: The vehicle would not start, and the check engine light was on.

Diagnosis: The B0793 code was retrieved, and further inspection showed damaged wiring near the transmission range sensor.

Solution: Replaced the damaged wiring harness and secured all connections.

Cost: $150 (wiring harness: $50, labor: $100)

Result: The vehicle started successfully, and the check engine light remained off after a road test.

Diagnose B0793

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B0793
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes