B07B8 - Understanding and Fixing the B07B8 Code in 2015-2018 Honda Accord and Other Models

Quick Answer

B07B8 means: B07B8 indicates a malfunction in the left rear door lock actuator of the body control module.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with B07B8? It's advisable to address this issue soon to avoid further complications.

Common Questions

What does B07B8 mean and how does it affect my car?

The B07B8 code refers to a malfunction in the left rear door lock actuator, which can lead to security issues and inconveniences such as the inability to lock or unlock the door properly. Over time, ignoring this code can lead to more significant electrical issues, impacting other systems in your vehicle.

What are the most common causes of B07B8 and how much does it cost to fix?

The most frequent cause of the B07B8 code is a faulty left rear door lock actuator, which can cost between $150 and $300 to replace. Wiring issues can also occur, costing around $100 to $200 to repair. Regular maintenance can help prevent these issues from arising.

Can I drive my car with B07B8 or should I stop immediately?

While you can technically drive the vehicle with the B07B8 code, it's advisable to address the issue soon. Ignoring it could lead to further complications, including potential safety hazards related to your vehicle's locking mechanisms.

How can I diagnose B07B8 myself using GeekOBD APP?

To diagnose the B07B8 code using the GeekOBD APP, connect the app to your vehicle's OBD2 port, run a full scan to retrieve the trouble codes, and look at the freeze frame data to understand the conditions under which the code was triggered. This will help you identify whether the issue is with the actuator or wiring.

What vehicles are most commonly affected by B07B8?

The B07B8 code is commonly found in 2015-2018 Honda Accord models. Other vehicles that may experience this code include certain models from Ford and Toyota, particularly those manufactured around the same time frame. Always check for any recalls or technical service bulletins related to your specific make and model.

How can I prevent B07B8 from happening again?

To prevent the B07B8 code from recurring, perform regular inspections of your vehicle's electrical components, especially after inclement weather. Ensure that the wiring is intact and free of corrosion. Additionally, keep the door lock actuators well-lubricated and address any issues promptly to avoid further complications.

What is B07B8?

The B07B8 diagnostic trouble code indicates a problem with the vehicle's body control module (BCM), specifically related to the left rear door lock actuator. This code can present itself in various models, but it is commonly found in 2015-2018 Honda Accord vehicles. When the B07B8 code is triggered, it usually means that the BCM is detecting an abnormal condition or malfunction in the left rear door lock system. This could manifest as problems with the locking mechanism, where the door may not lock or unlock properly, or it may not respond at all to the key fob or internal controls. In practical terms, a vehicle showing this code could have an unreliable door locking system, which could compromise your vehicle's security. If left unresolved, it might lead to further electrical issues within the vehicle or even affect the overall functionality of the BCM. Drivers experiencing this code should take it seriously, as it could indicate a need for immediate attention to avoid more costly repairs down the line. Understanding the potential symptoms, causes, and diagnostic steps can help you address the B07B8 code effectively and ensure your vehicle operates safely.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B07B8 is present:

  • Check engine light stays on constantly, indicating a persistent issue that needs attention.
  • Left rear door may not lock/unlock with key fob or interior switch, leading to potential security concerns.
  • Intermittent failure of the door lock actuator, where it may respond at times and fail at others, causing frustration.
  • Increased electrical draw from the BCM, which may lead to battery drain if not addressed promptly.
  • Unusual noises when operating the door lock, such as grinding or clicking, indicating mechanical failure within the actuator.

Possible Causes

Most common causes of B07B8 (ordered by frequency):

  1. Faulty left rear door lock actuator - The most common cause, with approximately 60% of B07B8 cases attributed to a malfunctioning actuator that fails to communicate with the BCM.
  2. Wiring issues - Damaged or corroded wiring leading to poor connectivity can account for about 25% of B07B8 occurrences, as this might disrupt signals between components.
  3. BCM failure - While less common, malfunctioning BCMs can also cause this code, representing around 10% of cases. Regular maintenance can help prevent this issue.
  4. Moisture intrusion - Water damage due to leaks in the vehicle can affect electrical components, potentially causing this code in about 3% of cases.
  5. Installation errors - Incorrect installation of aftermarket components can lead to B07B8, though this is rare, representing about 2% of cases.

B07B8 Repair Costs

Cost Breakdown by Repair Type

Left Rear Door Lock Actuator Replacement

Replacing the faulty door lock actuator to restore functionality.

  • Total: $150 - $300
  • Success rate: 85%
Wiring Repair

Repairing any damaged wiring that may be causing communication issues.

  • Total: $100 - $200
  • Success rate: 75%
Money-Saving Tips for B07B8
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B07B8 Diagnosis Process

Follow these systematic steps to accurately diagnose B07B8. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter or specific diagnostic tools to test the left rear door lock actuator and related circuits (20-30 minutes)

Step 3: Component testing - Use a multimeter or specific diagnostic tools to test the left rear door lock actuator and related circuits (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - Verify proper operation of the lock actuator after repairs and clear codes (10-15 minutes)

Step 4: System function test - Verify proper operation of the lock actuator after repairs and clear codes (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Repair Case Study: 2017 Honda Accord Left Rear Door Lock Issue

Vehicle: 2017 Honda Accord, 45,000 miles

Problem: Customer reported that the left rear door would not lock using the key fob or interior switch.

Diagnosis: Using the GeekOBD APP, the B07B8 code was retrieved. A visual inspection showed corroded wiring leading to the actuator.

Solution: Replaced the left rear door lock actuator and repaired the damaged wiring.

Cost: $250 (Parts: $150 for actuator, $100 for wiring repair)

Result: The door locking mechanism functioned correctly after repairs, and the customer reported no further issues.

Case Study 2: Repair Case Study: 2016 Ford Fusion Door Lock Malfunction

Vehicle: 2016 Ford Fusion, 60,000 miles

Problem: Intermittent failure of the left rear door lock to respond during operation.

Diagnosis: Diagnostic scan revealed B07B8. Component testing identified a faulty actuator as the primary issue.

Solution: Replaced the left rear door lock actuator.

Cost: $220 (Parts: $180 for actuator, $40 for labor)

Result: After the repair, the door lock operated smoothly, and the customer was satisfied.

Diagnose B07B8

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B07B8
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: MEDIUM
Category: Body Codes