B07CF - Understanding the Brake Fluid Pressure Sensor Code in 2015-2019 Ford F-150 Models

Quick Answer

B07CF means: B07CF indicates a malfunction in the brake fluid pressure sensor.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with B07CF? Immediate attention is required to ensure safe braking performance.

Common Questions

What does B07CF mean and how does it affect my car?

The B07CF code indicates an issue with your brake fluid pressure sensor. This can affect your car's braking performance, leading to potential safety risks. If the sensor fails, you may notice the brake warning light on the dashboard and experience a spongy brake pedal, making it harder to stop your vehicle safely.

What are the most common causes of B07CF and how much does it cost to fix?

The common causes of B07CF include a faulty brake fluid pressure sensor, brake fluid leaks, and issues with the brake master cylinder. Repair costs can range from $150 to $300 depending on the necessary parts and labor involved.

Can I drive my car with B07CF or should I stop immediately?

It is not safe to drive your vehicle with the B07CF code active. The code indicates a potential failure in the braking system, which can lead to unsafe driving conditions. It's best to have your vehicle inspected as soon as possible.

How can I diagnose B07CF myself using GeekOBD APP?

To diagnose B07CF with the GeekOBD APP, connect the device to your vehicle's OBD2 port, run a diagnostic scan, and retrieve any trouble codes. The app will provide freeze frame data to help you understand the context of the error, enabling you to narrow down the potential issues.

What vehicles are most commonly affected by B07CF?

Commonly affected vehicles include the 2015-2019 Ford F-150. Other models from Ford and similar manufacturers may also experience this code, particularly those with similar brake systems. Always check for manufacturer recalls or technical service bulletins related to brake systems.

How can I prevent B07CF from happening again?

Regular maintenance of your brake system can help prevent issues leading to the B07CF code. Check your brake fluid level and condition periodically, and inspect for leaks or corrosion around the brake components. Using the GeekOBD APP for routine diagnostics can also help catch problems early.

What is B07CF?

The diagnostic trouble code (DTC) B07CF is related to the brake fluid pressure sensor in vehicles, specifically indicating a fault in the brake fluid pressure monitoring system. This code typically appears in models such as the 2015-2019 Ford F-150, among others. When this code is triggered, it means that the brake fluid pressure sensor is not functioning correctly, which can lead to serious implications for vehicle safety and performance. The brake fluid pressure sensor is crucial because it helps monitor the hydraulic pressure within the brake system, ensuring that sufficient pressure is available for effective braking. When the sensor fails, it can cause erratic brake behavior, including reduced braking efficiency or even brake failure. Common symptoms associated with this code include the illumination of the brake warning light on the dashboard, unusual brake pedal feel, or a complete loss of braking ability in severe cases. It's essential to address a B07CF code promptly, as neglecting to do so can compromise your vehicle's safety and could potentially lead to accidents. Regular maintenance checks and timely diagnostics using tools like the GeekOBD APP can help car owners keep their vehicles in safe working condition and prevent this DTC from appearing.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B07CF is present:

  • The brake warning light stays illuminated on the dashboard, indicating a potential brake system issue.
  • Drivers may experience a spongy or unresponsive brake pedal, making it difficult to stop the vehicle effectively.
  • There may be a noticeable decrease in braking power, leading to longer stopping distances.
  • In some cases, you may hear unusual noises when applying the brakes, indicating a malfunction.
  • Brake fluid leaks may be visible near the brake lines or beneath the master cylinder.

Possible Causes

Most common causes of B07CF (ordered by frequency):

  1. The most common cause of the B07CF code is a faulty brake fluid pressure sensor, which has a likelihood of approximately 60%. This can occur due to wear and tear over time or exposure to contaminants.
  2. Another potential cause is a brake fluid leak, which can reduce the pressure and trigger this DTC. Regular checks of the brake system can help prevent fluid loss.
  3. A malfunctioning brake master cylinder may also be responsible for this code. Keeping up with routine maintenance can help identify issues before they escalate.
  4. Less common causes include electrical issues such as short circuits or corroded connectors that affect the sensor's operation.
  5. A rare but possible cause is the failure of the ABS module, which can impact brake fluid pressure monitoring.

B07CF Repair Costs

Cost Breakdown by Repair Type

Brake Fluid Pressure Sensor Replacement

Replacing the faulty brake fluid pressure sensor with a new, OEM part.

  • Total: $150 - $300
  • Success rate: 90%
Brake System Inspection

Comprehensive inspection of the entire brake system for leaks or other issues.

  • Total: $100 - $200
  • Success rate: 85%
Money-Saving Tips for B07CF
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B07CF Diagnosis Process

Follow these systematic steps to accurately diagnose B07CF. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion around the brake fluid pressure sensor (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion around the brake fluid pressure sensor (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context and check for any other related codes (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context and check for any other related codes (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter or specific diagnostic tools to test the brake fluid pressure sensor for proper voltage and resistance (20-30 minutes)

Step 3: Component testing - Use a multimeter or specific diagnostic tools to test the brake fluid pressure sensor for proper voltage and resistance (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - Verify proper operation after repairs are made and clear codes before conducting a road test (10-15 minutes)

Step 4: System function test - Verify proper operation after repairs are made and clear codes before conducting a road test (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm that the brake system operates correctly and no DTCs reappear (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm that the brake system operates correctly and no DTCs reappear (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Brake Fluid Pressure Sensor Replacement on 2017 Ford F-150

Vehicle: 2017 Ford F-150, 60,000 miles

Problem: Customer reported a check engine light and a spongy brake pedal.

Diagnosis: The GeekOBD APP indicated a B07CF code. A visual inspection revealed corrosion on the brake fluid pressure sensor connections.

Solution: Replaced the brake fluid pressure sensor and cleaned the connectors to ensure proper electrical contact.

Cost: $250 for parts and labor.

Result: After the repair, the customer reported normal brake performance and no warning lights.

Case Study 2: Brake System Inspection on 2018 Ford Explorer

Vehicle: 2018 Ford Explorer, 45,000 miles

Problem: Brake warning light was illuminated, and the customer felt a loss of braking power.

Diagnosis: The OBD2 scan revealed a B07CF code. Further inspection uncovered a brake fluid leak from the master cylinder.

Solution: Replaced the master cylinder and refilled brake fluid. The brake fluid pressure sensor was also tested and confirmed functional.

Cost: $350 for parts and labor.

Result: Post-repair, the warning light was cleared, and braking performance was restored.

Diagnose B07CF

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B07CF
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes