B07E6 - Understanding the Steering Angle Sensor Malfunction in 2015-2020 Ford F-150 and Other Vehicles

Quick Answer

B07E6 means: B07E6 indicates a malfunction in the steering angle sensor circuit, affecting vehicle stability and handling.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with B07E6? Immediate attention is recommended to avoid potential safety risks.

Common Questions

What does B07E6 mean and how does it affect my car?

B07E6 indicates a problem with the steering angle sensor, which is essential for maintaining vehicle stability and safety. If this sensor malfunctions, you may experience issues with steering accuracy, leading to potential safety hazards while driving.

What are the most common causes of B07E6 and how much does it cost to fix?

Common causes include a faulty steering angle sensor, loose connections, or electrical issues. Repair costs typically range from $150 to $300 for sensor replacement, with additional costs for wiring repairs if needed.

Can I drive my car with B07E6 or should I stop immediately?

It's advisable to refrain from driving your vehicle until the issue is resolved, as steering problems can significantly compromise safety, especially in emergency situations.

How can I diagnose B07E6 myself using GeekOBD APP?

Using the GeekOBD APP, you can connect to your vehicle's OBD2 port, retrieve codes, and view freeze frame data. This will help you understand the conditions under which the B07E6 code triggered, aiding in your diagnostic process.

What vehicles are most commonly affected by B07E6?

B07E6 is frequently seen in models like the 2015-2020 Ford F-150 and other vehicles equipped with electronic stability control systems. Regular maintenance and steering inspections can help mitigate the risk.

How can I prevent B07E6 from happening again?

To prevent future occurrences of B07E6, ensure regular maintenance checks, especially for the steering system. Keep an eye on wiring integrity, and consider having your alignment checked periodically.

What is B07E6?

The Diagnostic Trouble Code (DTC) B07E6 indicates a malfunction in the steering angle sensor circuit. This sensor plays a crucial role in the vehicle's stability control and steering response, often integrated into systems like Electronic Stability Control (ESC) and Advanced Driver Assistance Systems (ADAS). When the B07E6 code triggers, it means that the vehicle's onboard computer has detected an inconsistency between the steering angle sensor's readings and the expected parameters, which can lead to erratic steering behavior and impaired vehicle handling. This malfunction can manifest as the 'Check Engine' light illuminating on your dashboard, and if left unresolved, it may result in decreased safety, particularly during maneuvers requiring precise steering input. For drivers of popular models such as the 2015-2020 Ford F-150, this code could be indicative of underlying issues that may not only affect the driving experience but also lead to costly repairs if the problem persists. It's essential to address this code promptly to ensure optimal vehicle performance and safety.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B07E6 is present:

  • The 'Check Engine' light remains illuminated, indicating a need for diagnostic inspection.
  • Steering feels loose or unresponsive, which can make it difficult to control the vehicle accurately.
  • The vehicle may exhibit erratic behavior during turns, including unexpected drifting or pulling.
  • Increased tire wear may occur due to improper alignment caused by sensor failure.
  • Warning lights for stability control systems may activate, suggesting issues with vehicle safety features.

Possible Causes

Most common causes of B07E6 (ordered by frequency):

  1. The most common cause is a faulty steering angle sensor, which has a likelihood of around 60%. This sensor can wear out or become damaged over time due to exposure to road conditions.
  2. A loose or corroded electrical connector may also trigger this code, accounting for about 20% of cases. Poor connectivity can lead to intermittent signals received by the vehicle's control module.
  3. Electrical issues, such as frayed wiring within the steering column, can cause erratic readings; these issues can often be prevented with regular inspections.
  4. Less common causes include issues with the power steering system, which can affect sensor operation, and may require more extensive repairs.
  5. Rarely, software glitches in the vehicle's onboard computer can lead to erroneous code readings. In such cases, a software update may fix the problem.

B07E6 Repair Costs

Cost Breakdown by Repair Type

Steering Angle Sensor Replacement

Replacing the faulty steering angle sensor to restore proper functionality.

  • Total: $150 - $300
  • Success rate: 85%
Wiring and Connector Repair

Repairing or replacing damaged wiring and connectors associated with the steering angle sensor.

  • Total: $100 - $200
  • Success rate: 75%
Money-Saving Tips for B07E6
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B07E6 Diagnosis Process

Follow these systematic steps to accurately diagnose B07E6. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for damaged wiring, loose connections, or signs of corrosion in the steering column (5-10 minutes)

Step 1: Initial visual inspection - Check for damaged wiring, loose connections, or signs of corrosion in the steering column (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with the GeekOBD APP - Retrieve all codes and freeze frame data to understand the context and history of the fault (10-15 minutes)

Step 2: OBD2 scan with the GeekOBD APP - Retrieve all codes and freeze frame data to understand the context and history of the fault (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Utilize a multimeter or specific diagnostic tools to test the steering angle sensor and related circuits (20-30 minutes)

Step 3: Component testing - Utilize a multimeter or specific diagnostic tools to test the steering angle sensor and related circuits (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - After repairs, verify the proper operation of the steering angle sensor and clear codes (10-15 minutes)

Step 4: System function test - After repairs, verify the proper operation of the steering angle sensor and clear codes (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to ensure the issue has been resolved and that all systems are functioning correctly (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to ensure the issue has been resolved and that all systems are functioning correctly (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Steering Angle Sensor Replacement in a 2018 Ford F-150

Vehicle: 2018 Ford F-150, 45,000 miles

Problem: Customer reported the 'Check Engine' light was on and steering felt loose.

Diagnosis: After scanning for trouble codes with GeekOBD APP, B07E6 was confirmed. A visual inspection revealed a damaged steering angle sensor.

Solution: Replaced the steering angle sensor and cleared the trouble codes. Conducted a system function test to ensure proper operation.

Cost: $250 (parts: $150 for sensor, $100 for labor)

Result: Post-repair, the customer reported that steering was responsive and the warning light remained off.

Case Study 2: Wiring Repair for B07E6 in a 2016 Honda Accord

Vehicle: 2016 Honda Accord, 60,000 miles

Problem: Customer experienced intermittent steering issues and the 'Check Engine' light was on.

Diagnosis: Used GeekOBD APP to retrieve codes, finding B07E6. Inspection revealed corroded wiring near the steering column.

Solution: Repaired the damaged wiring and connectors associated with the steering angle sensor.

Cost: $180 (parts: $80 for wiring, $100 for labor)

Result: The steering issue was resolved, and the customer reported improved handling and no more warning lights.

Diagnose B07E6

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B07E6
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes