B080D - Airbag Circuit High Resistance - Common in 2015-2020 Ford F-150

Quick Answer

B080D means: B080D indicates a high resistance in the airbag circuit, affecting safety.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with B080D? Immediate attention required to ensure airbag functionality.

Common Questions

What does B080D mean and how does it affect my car?

The B080D code signifies a high resistance within your airbag circuit, which can prevent the airbags from deploying correctly in the event of an accident. Immediate attention is necessary to ensure the safety of all passengers.

What are the most common causes of B080D and how much does it cost to fix?

Common causes include corroded wiring and faulty connectors, with repair costs ranging from $100 to $600 depending on the required fixes. It's crucial to have a professional diagnose the issue for accurate repairs.

Can I drive my car with B080D or should I stop immediately?

Driving with a B080D code is not recommended as it indicates a potential failure of the airbag system, which can significantly compromise your safety during an accident. It's best to address this issue before driving further.

How can I diagnose B080D myself using GeekOBD APP?

Using the GeekOBD APP, you can scan for codes, review freeze-frame data, and identify any additional fault codes that may be present, providing useful insights into your vehicle's airbag system.

What vehicles are most commonly affected by B080D?

The B080D code is frequently seen in models like the 2015-2020 Ford F-150, 2016-2018 Chevrolet Silverado, and 2017-2019 Honda Accord, among others. It's essential to check for any recalls or service bulletins related to your specific model.

How can I prevent B080D from happening again?

Regular maintenance of your vehicle's electrical system, including inspecting connectors and wiring for signs of wear or corrosion, can help prevent the B080D code from recurring. Keeping your vehicle dry and clean can also minimize risks.

What is B080D?

The B080D trouble code indicates that there is a high resistance issue within the airbag circuit, impacting the vehicle's safety systems. This code is commonly found in vehicles such as the 2015-2020 Ford F-150, where the airbag system may fail to deploy during an accident due to malfunction. The body control module (BCM) monitors the integrity of the airbag circuit, and when it detects a resistance level that exceeds specified parameters, it triggers this code. Drivers may experience warnings from the airbag indicator light on their dashboard. It's crucial to address this issue promptly, as failure to do so can compromise passenger safety. If left unresolved, it may lead to more severe issues, such as the complete failure of the airbag system, resulting in significant safety risks during a collision. Additionally, fixing this problem could involve inspecting and possibly replacing connectors, wiring, or the airbag module itself. Therefore, understanding and addressing the B080D code with urgency can save lives and ensure vehicle safety.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B080D is present:

  • The airbag warning light on the dashboard illuminates and stays on, indicating a potential fault in the airbag system.
  • Drivers may notice that the airbag system fails to perform self-checks during ignition, leading to uncertainty about its reliability.
  • Increased resistance may cause issues with the seatbelt pretensioners, which could fail to activate correctly during a collision, posing a serious risk.
  • In certain cases, the vehicle may exhibit intermittent airbag deployment warnings, which can be frustrating and concerning for the driver.
  • Additional symptoms may include malfunctioning or unresponsive airbag switches, leading to doubts about overall safety measures.

Possible Causes

Most common causes of B080D (ordered by frequency):

  1. The most common cause is corroded or damaged wiring in the airbag circuit, occurring in about 60% of the cases. This can often happen due to moisture intrusion or prolonged wear.
  2. Another frequent cause is faulty connectors, particularly in vehicles with a history of airbag-related recalls. These connectors may have poor contact, leading to signal issues.
  3. A less common cause includes failure of the airbag module itself, which can be diagnosed through specialized tools and is usually accompanied by additional codes.
  4. A rare but serious cause could be a malfunctioning body control module, which could lead to multiple fault codes and should be assessed by a professional.
  5. Lastly, accidental deployment of the airbag during repairs or maintenance can also trigger this code, though this is quite infrequent.

B080D Repair Costs

Cost Breakdown by Repair Type

Connector Replacement

Replacing corroded or damaged connectors in the airbag circuit.

  • Total: $150 - $300
  • Success rate: 90%
Wiring Repair

Repairing or replacing damaged wiring within the airbag system.

  • Total: $100 - $250
  • Success rate: 85%
Airbag Module Replacement

Replacing the airbag control module if it is found to be faulty.

  • Total: $300 - $600
  • Success rate: 95%
Money-Saving Tips for B080D
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B080D Diagnosis Process

Follow these systematic steps to accurately diagnose B080D. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion, taking about 5-10 minutes

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion, taking about 5-10 minutes.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze-frame data to understand the fault context, which usually takes 10-15 minutes

Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze-frame data to understand the fault context, which usually takes 10-15 minutes.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter or specific diagnostic tools to test suspected components, which may take 20-30 minutes

Step 3: Component testing - Use a multimeter or specific diagnostic tools to test suspected components, which may take 20-30 minutes.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - Verify proper operation after repairs and clear codes, typically taking 10-15 minutes

Step 4: System function test - Verify proper operation after repairs and clear codes, typically taking 10-15 minutes.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success, requiring about 15-20 minutes

Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success, requiring about 15-20 minutes.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Airbag Circuit Repair on 2016 Ford F-150

Vehicle: 2016 Ford F-150, 75,000 miles

Problem: Customer reported that the airbag warning light illuminated and remained on.

Diagnosis: Initial inspection revealed corroded wiring in the airbag circuit. An OBD2 scan confirmed the B080D code.

Solution: Replaced corroded connectors and repaired the wiring. Cleared the codes and performed a function test.

Cost: $250 (including parts and labor)

Result: The airbag system functioned properly post-repair, and the warning light was no longer illuminated.

Case Study 2: B080D Diagnosis on 2018 Chevrolet Silverado

Vehicle: 2018 Chevrolet Silverado, 40,000 miles

Problem: Customer experienced intermittent airbag warning lights and concerns about airbag deployment.

Diagnosis: A thorough diagnostic revealed faulty connectors causing high resistance in the circuit.

Solution: Replaced the faulty connectors and verified the system's operation.

Cost: $180 (parts and labor included)

Result: The airbag system was restored to full functionality, and the customer was satisfied with the prompt service.

Diagnose B080D

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B080D
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes