B087B - Understanding the Body Control Module Fault in 2015-2018 Chevrolet Silverado

Quick Answer

B087B means: B087B indicates a fault in the Body Control Module that affects door lock functions.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with B087B? Address this issue promptly to ensure door security and functionality.

Common Questions

What does B087B mean and how does it affect my car?

B087B signifies a malfunction in your vehicle's Body Control Module related to the door lock functions. If this code appears, you may experience issues with locking or unlocking doors, which can compromise the safety and security of your vehicle. Ignoring this code can lead to further electrical issues.

What are the most common causes of B087B and how much does it cost to fix?

The most common causes include a faulty door lock actuator, damaged wiring, or a malfunctioning BCM. Repair costs can range from $150 for an actuator replacement to $200 for BCM reprogramming. Diagnosing the issue accurately can save you unnecessary expenses.

Can I drive my car with B087B or should I stop immediately?

While it's possible to drive with the B087B code, it's not recommended. The malfunctioning door locks can pose a security risk. Addressing the issue as soon as possible is crucial for your safety and the integrity of your vehicle.

How can I diagnose B087B myself using GeekOBD APP?

To diagnose B087B with the GeekOBD APP, first connect the app to your vehicle's OBD2 port. Run a full scan to retrieve all diagnostic codes and check for freeze frame data to understand the context of the fault. Look for any related codes that may point towards a specific issue in the door lock system.

What vehicles are most commonly affected by B087B?

DTC B087B is frequently seen in 2015-2018 Chevrolet Silverado models. Other GM vehicles from the same era may also experience this issue, particularly those with electronic door lock systems.

How can I prevent B087B from happening again?

Regular maintenance of your vehicle's electrical system can help prevent B087B. This includes inspecting wiring and connectors for wear, keeping door seals clean, and ensuring the BCM is functioning properly through periodic scans with the GeekOBD APP.

What is B087B?

The diagnostic trouble code B087B indicates a fault with the Body Control Module (BCM) in your vehicle. Specifically, it signifies a malfunction in the control of the rear left or right door lock actuator. When this code is triggered, it means that the BCM has detected an issue with the circuit that controls one of your car's door locks, which could affect the locking and unlocking functions of your vehicle's doors. This can lead to safety concerns, as it may leave doors unsecured, and could create inconveniences for the driver and passengers. It's important to address this issue promptly to maintain the functionality of your vehicle's locking system. Common symptoms associated with the B087B code include the inability to lock or unlock a specific door, the activation of warning lights on the dashboard, and potential issues with other electronic systems in the vehicle. If ignored, this problem could lead to further complications, possibly affecting the BCM and related circuitry. Therefore, understanding and addressing DTC B087B is crucial for the overall electrical health and safety of your vehicle.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B087B is present:

  • The 'Check Engine' light is illuminated on the dashboard, indicating a fault with the BCM.
  • The rear left or right door may not lock or unlock correctly, causing inconvenience when entering or exiting the vehicle.
  • You may notice that other electrical systems, such as interior lights or power windows, are malfunctioning, which can be linked to the BCM error.
  • Audible warning chimes may sound when attempting to lock the doors, alerting you to a potential issue.
  • Inconsistent operation of the remote key fob or central locking system, leading to frustration when trying to secure the vehicle.

Possible Causes

Most common causes of B087B (ordered by frequency):

  1. The most common cause of B087B is a faulty door lock actuator, which occurs in about 60% of cases. This component can wear out or fail due to age or exposure to moisture.
  2. Another frequent cause is damaged wiring or connections in the door lock circuit, which can happen due to wear and tear or improper installation.
  3. A malfunctioning BCM itself can also trigger this code, although it's less common. Regular maintenance can help prevent this.
  4. Less common but serious causes include corrosion on connectors, which can disrupt the electrical flow and lead to BCM faults.
  5. A rare cause could be a software glitch in the BCM, which might require an update or reprogramming at a dealership.

B087B Repair Costs

Cost Breakdown by Repair Type

Door Lock Actuator Replacement

Replacing the faulty door lock actuator with a new OEM part.

  • Total: $150 - $300
  • Success rate: 85%
BCM Reprogramming

If the BCM is the source of the error, reprogramming may be necessary.

  • Total: $100 - $200
  • Success rate: 75%
Money-Saving Tips for B087B
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B087B Diagnosis Process

Follow these systematic steps to accurately diagnose B087B. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion in the door lock circuit (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion in the door lock circuit (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context

Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context. This can highlight if there are other related issues (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter to test the voltage and resistance of the door lock actuator

Step 3: Component testing - Use a multimeter to test the voltage and resistance of the door lock actuator. If the actuator is out of specification, it may need replacement (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - After any repairs, verify the operation of the door locks and clear codes to ensure that the issue has been resolved (10-15 minutes)

Step 4: System function test - After any repairs, verify the operation of the door locks and clear codes to ensure that the issue has been resolved (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm that the door lock functions and the error code do not return (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm that the door lock functions and the error code do not return (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Door Lock Actuator Replacement on 2016 Chevrolet Silverado

Vehicle: 2016 Chevrolet Silverado, 65,000 miles

Problem: Customer reported that the rear right door would not lock or unlock with the remote or manually.

Diagnosis: After performing a scan with the GeekOBD APP, B087B was retrieved. A visual inspection revealed a faulty door lock actuator.

Solution: Replaced the rear right door lock actuator and tested the circuit to confirm functionality.

Cost: $220 (Parts: $150 for actuator, $70 for labor)

Result: The door lock functions were restored, and the customer reported satisfaction with the repair.

Case Study 2: BCM Reprogramming on 2017 Chevrolet Equinox

Vehicle: 2017 Chevrolet Equinox, 40,000 miles

Problem: Intermittent locking issues with both front doors and illuminated 'Check Engine' light.

Diagnosis: Diagnostic scan indicated B087B and further testing suggested a software issue in the BCM.

Solution: Performed a BCM reprogramming and cleared the error codes.

Cost: $150 (Parts: $100 for software update, $50 for labor)

Result: The locking system was fully functional post-reprogramming, with no return of the error.

Diagnose B087B

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B087B
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes