B08DA - Front Left Seat Position Sensor Circuit High Input (Common in 2015-2022 Ford F-150)

Quick Answer

B08DA means: B08DA indicates an issue with the front left seat position sensor circuit, often resulting in seat adjustment problems.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with B08DA? It's advisable to diagnose and repair this issue promptly, especially if it affects airbag deployment.

Common Questions

What does B08DA mean and how does it affect my car?

The B08DA code indicates a malfunction in the front left seat position sensor circuit, which can prevent proper seat adjustments and potentially affect airbag deployment. It's crucial to address this code to maintain comfort and safety.

What are the most common causes of B08DA and how much does it cost to fix?

Common causes of B08DA include a faulty seat position sensor and wiring issues. Repair costs typically range from $150 to $300 for sensor replacement, depending on labor and parts.

Can I drive my car with B08DA or should I stop immediately?

While you can technically drive with the B08DA code, it is not advisable to ignore it. Since it may affect airbag deployment in an accident, it's best to have it diagnosed and repaired as soon as possible.

How can I diagnose B08DA myself using GeekOBD APP?

To diagnose B08DA using the GeekOBD APP, connect the app to your vehicle's OBD2 port, retrieve trouble codes, and view freeze frame data. Check for voltage readings at the seat position sensor to determine if it's functioning correctly.

What vehicles are most commonly affected by B08DA?

The B08DA code commonly appears in vehicles like the 2015-2022 Ford F-150 and similar models. Always check for any recalls or Technical Service Bulletins (TSBs) related to seat position sensors.

How can I prevent B08DA from happening again?

Regular maintenance, including inspections of seat wiring and connectors, can help prevent B08DA. Avoid excessive force when adjusting the seat and ensure that any aftermarket modifications are professionally installed.

What is B08DA?

The B08DA diagnostic trouble code (DTC) indicates a problem with the front left seat position sensor circuit, which is responsible for monitoring the position of the front left seat in your vehicle. This sensor sends data to the vehicle's Body Control Module (BCM) to adjust the seat's position based on the driver's preferences. When the BCM detects a high voltage input from the sensor, it triggers the B08DA code. This can lead to issues with seat adjustments, as the system may fail to respond correctly to your commands. In practical terms, if this code appears, you might notice that the driver's seat does not move as expected, or it may remain stuck in one position, affecting your comfort and safety while driving. Additionally, the airbag system may also be affected, as the seat position can play a crucial role in determining airbag deployment during a collision. Therefore, addressing this code promptly is essential to ensure both comfort and safety while operating your vehicle.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B08DA is present:

  • The check engine light or airbag warning light may illuminate, indicating a potential safety issue.
  • The driver's seat may not adjust forward or backward, causing discomfort and affecting driving position.
  • You might experience erratic movement of the driver's seat, with it moving unexpectedly or not responding at all.
  • Inconsistent seat memory settings, where the seat fails to return to a saved position after being adjusted.
  • In some cases, the airbag system may also malfunction, as the seat position can influence airbag deployment.

Possible Causes

Most common causes of B08DA (ordered by frequency):

  1. The most common cause is a faulty seat position sensor, which can occur in about 70% of cases. This sensor may have worn out or failed due to frequent use.
  2. A short circuit or wiring issue in the seat position sensor circuit, responsible for sending signals to the BCM, can also lead to the B08DA code. This may occur due to damaged insulation or corrosion.
  3. Improper installation or repair of the seat and its components can lead to misalignment or malfunction, resulting in a failure to communicate with the BCM.
  4. Less common but serious causes include a malfunctioning Body Control Module (BCM), which may not process the sensor's data correctly, affecting multiple systems.
  5. A rare cause could be interference from aftermarket accessories or modifications that impact the electrical system, leading to false signals.

B08DA Repair Costs

Cost Breakdown by Repair Type

Seat Position Sensor Replacement

Replacing the faulty seat position sensor can resolve the B08DA code and restore normal functionality.

  • Total: $150 - $300
  • Success rate: 90%
Wiring Repair

Repairing damaged wiring or connectors related to the seat position sensor circuit.

  • Total: $50 - $150
  • Success rate: 75%
Money-Saving Tips for B08DA
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B08DA Diagnosis Process

Follow these systematic steps to accurately diagnose B08DA. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Conduct an initial visual inspection, checking for obvious signs like damaged wiring, loose connections, or corrosion around the seat position sensor (5-10 minutes)

Step 1: Conduct an initial visual inspection, checking for obvious signs like damaged wiring, loose connections, or corrosion around the seat position sensor (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: Use an OBD2 scanner, such as the GeekOBD APP, to retrieve all trouble codes and freeze frame data

Step 2: Use an OBD2 scanner, such as the GeekOBD APP, to retrieve all trouble codes and freeze frame data. This will provide context for the fault (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Perform component testing on the seat position sensor using a multimeter to check for proper voltage and resistance readings (20-30 minutes)

Step 3: Perform component testing on the seat position sensor using a multimeter to check for proper voltage and resistance readings (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: After any repairs, conduct a system function test to verify proper operation and clear any codes from the BCM (10-15 minutes)

Step 4: After any repairs, conduct a system function test to verify proper operation and clear any codes from the BCM (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test the vehicle under various conditions to confirm that the driver's seat adjusts correctly and the airbag system functions as intended (15-20 minutes)

Step 5: Road test the vehicle under various conditions to confirm that the driver's seat adjusts correctly and the airbag system functions as intended (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Ford F-150 Seat Position Sensor Replacement

Vehicle: 2018 Ford F-150, 45,000 miles

Problem: The driver reported that the seat would not adjust forward or backward, and the airbag light was illuminated.

Diagnosis: Using the GeekOBD APP, we confirmed the B08DA code and performed a visual inspection, revealing a faulty seat position sensor.

Solution: Replaced the seat position sensor and repaired wiring connections. The seat adjustment was restored, and the airbag light turned off.

Cost: $250 (parts: $150, labor: $100)

Result: The repair was successful, and the driver reported no further issues with seat adjustments.

Case Study 2: Wiring Repair for 2016 Ford Explorer

Vehicle: 2016 Ford Explorer, 60,000 miles

Problem: The driver's seat would move erratically, and the airbag warning light was on.

Diagnosis: The diagnostic scan revealed the B08DA code. A thorough inspection found damaged wiring in the seat position sensor circuit.

Solution: Repaired the damaged wiring and secured all connections.

Cost: $100 (parts: $10, labor: $90)

Result: After the repair, the driver's seat functioned normally, and the airbag warning light was no longer present.

Diagnose B08DA

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B08DA
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: MEDIUM
Category: Body Codes