B093C - Understanding the B093C Code in 2015-2018 Honda Accord and Other Models

Quick Answer

B093C means: The B093C code signifies a malfunction in the passenger side door's electronic control system, often related to communication failures.

Fix: Check and replace faulty components Cost: $300 - $800 Time: 90-180 minutes

Can I drive with B093C? Immediate attention is recommended to prevent further issues with door functionality.

Common Questions

What does B093C mean and how does it affect my car?

The B093C code indicates a problem with the passenger side door's electronic control system. This can affect the locking mechanism, window operation, and other functions, leading to potential safety issues if not addressed.

What are the most common causes of B093C and how much does it cost to fix?

Common causes include a faulty BCM, damaged wiring, or malfunctioning door actuators. Repair costs can range from $100 for wiring repairs to $800 for a BCM replacement, depending on the specific issue.

Can I drive my car with B093C or should I stop immediately?

While it's possible to drive with this code, it's not advisable as it may compromise your vehicle's safety and security features. It's best to have the issue diagnosed and repaired promptly.

How can I diagnose B093C myself using GeekOBD APP?

You can use the GeekOBD APP to scan your vehicle for DTCs, review freeze frame data for context, and perform basic system tests to identify the root cause of the B093C code.

What vehicles are most commonly affected by B093C?

The B093C code is commonly found in 2015-2018 Honda Accord models, but it can also occur in other vehicles with similar body control systems. Check for any recalls related to your vehicle.

How can I prevent B093C from happening again?

Regular maintenance of your vehicle's electrical systems, keeping connections clean and dry, and promptly addressing any warning lights can help prevent the recurrence of the B093C code.

What is B093C?

The DTC B093C code is a diagnostic trouble code indicating a malfunction in the automotive body control system, specifically related to the passenger side door. This issue is commonly found in 2015-2018 Honda Accord models, but can also appear in various other vehicles equipped with advanced body control systems. When the B093C code is triggered, it typically means that there is a failure in the communication between the body control module and the passenger door's electronic components. This can lead to various malfunctions, such as the inability to unlock the passenger door remotely, failure of the window to operate, or issues with the door locks. If left unaddressed, it may result in further electrical issues or even a complete failure of the door control functions. Therefore, understanding and diagnosing this issue promptly is crucial for maintaining the vehicle's functionality and safety.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B093C is present:

  • The check engine light or door warning light illuminates consistently on the dashboard, indicating a fault in the door system.
  • The passenger door lock may not respond to the central locking system, leading to inconvenience and potential security risks.
  • The window on the passenger side does not operate, either being stuck in a closed position or failing to respond to the window switch.
  • Unusual noises may be heard when attempting to operate the door locks or windows, indicating potential electrical component failure.
  • Inconsistent operation of interior lights when the passenger door is opened, suggesting issues with door sensors.

Possible Causes

Most common causes of B093C (ordered by frequency):

  1. The most common cause is a faulty body control module (BCM), which has a likelihood of about 60%. The BCM is responsible for managing functions related to the door system and may fail due to electrical shorts or water damage.
  2. Another cause could be damaged wiring or connectors, accounting for around 25%. Over time, wires can wear out or become corroded, leading to poor connections and communication failures.
  3. A third possibility is a malfunctioning door actuator or lock mechanism, which can happen due to wear and tear, particularly in older vehicles. Regular maintenance can help prevent this.
  4. Less common but more serious is a failure in the vehicle's main computer system, which can cause widespread electrical issues throughout the vehicle.
  5. A rare cause includes software glitches within the BCM, leading to sporadic errors. Keeping software updated is essential in such cases.

B093C Repair Costs

Cost Breakdown by Repair Type

BCM Replacement

Replacing the body control module can resolve the B093C code if it is found to be faulty.

  • Total: $300 - $800
  • Success rate: 85%
Wiring Repair

Repairing damaged wiring or connectors can fix communication issues between the BCM and door.

  • Total: $100 - $300
  • Success rate: 90%
Door Actuator Replacement

Replacing the door actuator if it is malfunctioning can restore functionality.

  • Total: $150 - $400
  • Success rate: 75%
Money-Saving Tips for B093C
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B093C Diagnosis Process

Follow these systematic steps to accurately diagnose B093C. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion around the passenger door area (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion around the passenger door area (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Use the GeekOBD APP to retrieve all codes and freeze frame data to understand the fault context and gather additional information (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Use the GeekOBD APP to retrieve all codes and freeze frame data to understand the fault context and gather additional information (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - With a multimeter, test the voltage and continuity of the wires leading to and from the BCM and the passenger door components (20-30 minutes)

Step 3: Component testing - With a multimeter, test the voltage and continuity of the wires leading to and from the BCM and the passenger door components (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - After repairs, verify the proper operation of the door locks and window functions, and clear any stored codes (10-15 minutes)

Step 4: System function test - After repairs, verify the proper operation of the door locks and window functions, and clear any stored codes (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm the repair success and ensure that the B093C code does not return (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm the repair success and ensure that the B093C code does not return (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: BCM Replacement on 2016 Honda Accord

Vehicle: 2016 Honda Accord, 75,000 miles

Problem: Customer reported that the passenger door lock was not functioning and the window wouldn't operate.

Diagnosis: After scanning with the GeekOBD APP, the B093C code was confirmed. A visual inspection revealed corrosion in the wiring leading to the BCM.

Solution: The body control module was replaced along with repairing the corroded wiring.

Cost: $600 (BCM - $450, wiring repair - $150)

Result: The passenger door functions were restored, and the customer reported satisfaction with the repair.

Case Study 2: Wiring Repair on 2017 Honda Accord

Vehicle: 2017 Honda Accord, 50,000 miles

Problem: Passenger door would not unlock with the remote, and interior lights remained off.

Diagnosis: Diagnosing with GeekOBD revealed a B093C code. Inspection showed a broken wire in the door harness.

Solution: The damaged wire was spliced and insulated to restore communication to the BCM.

Cost: $150 (wiring repair cost)

Result: All door functions returned to normal, and the customer was pleased with the quick fix.

Diagnose B093C

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B093C
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes