B0975 - Understanding the Brake Pedal Position Sensor Code for Honda and Toyota Models

Quick Answer

B0975 means: B0975 indicates a malfunction in the brake pedal position sensor circuit.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with B0975? Immediate attention is required to ensure vehicle safety.

Common Questions

What does B0975 mean and how does it affect my car?

B0975 indicates a problem with the brake pedal position sensor in your vehicle. This sensor is vital for communicating the brake pedal's position to the engine control module. If the sensor is malfunctioning, it can lead to issues with braking performance, including unintended acceleration or difficulty shifting gears. This can significantly affect your vehicle's safety and prevent you from driving it until repaired.

What are the most common causes of B0975 and how much does it cost to fix?

The most frequent cause of B0975 is a faulty brake pedal position sensor, which can cost between $150 and $300 to replace. Other causes include wiring problems and a malfunctioning ECM. Repair costs can vary widely, but typical ranges for repairs associated with this code are between $100 and $300, depending on the specific issue.

Can I drive my car with B0975 or should I stop immediately?

Driving with a B0975 code can be dangerous due to potential braking issues. It's advisable to stop driving the vehicle immediately and seek a professional diagnosis to avoid any safety risks. Ignoring this code could lead to more serious vehicle problems and safety hazards.

How can I diagnose B0975 myself using GeekOBD APP?

You can use the GeekOBD APP to diagnose the B0975 issue by first scanning your vehicle for error codes. After identifying the B0975 code, use the app to view freeze frame data to understand the conditions under which the code was triggered. Follow this by conducting a visual inspection of the brake pedal position sensor and its wiring, which you can also check through the app's diagnostic tools.

What vehicles are most commonly affected by B0975?

DTC B0975 is frequently reported in vehicles such as the 2016-2018 Honda Accord, 2017 Toyota Camry, and various models from Nissan and Ford. If you own one of these vehicles, it's wise to keep an eye on the brake system and be aware of any unusual symptoms.

How can I prevent B0975 from happening again?

To prevent the occurrence of B0975, ensure regular maintenance of your vehicle, including checking the brake system and electrical connections. Avoid aftermarket modifications that could interfere with your vehicle's electrical systems, and consider having your vehicle's diagnostic systems checked periodically to catch any potential issues early.

What is B0975?

The diagnostic trouble code B0975 refers to a malfunction in the brake pedal position sensor circuit. This sensor plays a crucial role in the vehicle's braking system by informing the engine control module (ECM) of the brake pedal's position. When this code is triggered, it typically indicates a problem with the sensor itself, wiring, or the connection to the ECM. In practical terms, a malfunctioning brake pedal position sensor can lead to issues like erratic braking behavior, an inability to shift out of park, or even an unsafe driving condition. For instance, in models like the 2016 Honda Accord or the 2017 Toyota Camry, a B0975 code could cause the brake lights to malfunction, creating a safety hazard. Additionally, if the brake pedal position sensor is not functioning properly, it can affect the vehicle's stability control and traction control systems. As a result, addressing a B0975 code promptly is essential to maintaining your vehicle’s safety and performance. Always consult a professional technician or utilize a reliable diagnostic tool, like the GeekOBD APP, to get accurate insights into the issue at hand.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B0975 is present:

  • The check engine light is illuminated, indicating a need for diagnostic attention.
  • Brake lights may stay on continuously, even when the brake pedal is not engaged, which can confuse other drivers.
  • Difficulty in shifting out of park, which can prevent the vehicle from being driven.
  • Inconsistent brake pedal feel, where the brake may feel spongy or unresponsive at times.
  • Unexpected activation of traction control or stability control systems, which can affect vehicle handling.

Possible Causes

Most common causes of B0975 (ordered by frequency):

  1. The most common cause of the B0975 code is a faulty brake pedal position sensor, occurring in about 60% of cases. This can happen due to wear and tear over time.
  2. Wiring issues, such as frayed wires or poor connections, are the second most common cause, accounting for roughly 25% of occurrences. These issues can stem from exposure to the elements or mechanical damage.
  3. A malfunctioning ECM can also trigger a B0975 code, although this is less common. Regular software updates can help prevent this issue.
  4. A less common but serious cause is the failure of the brake system itself, which can lead to dire safety risks if not addressed immediately.
  5. In rare cases, aftermarket modifications to the vehicle's electrical system can cause conflicts, leading to code B0975.

B0975 Repair Costs

Cost Breakdown by Repair Type

Brake Pedal Position Sensor Replacement

Replacing the faulty brake pedal position sensor with an OEM or quality aftermarket part.

  • Total: $150 - $300
  • Success rate: 85%
Wiring Repair/Replacement

Repairing or replacing damaged wiring or connectors related to the brake pedal position sensor.

  • Total: $100 - $200
  • Success rate: 90%
ECM Software Update

Updating the vehicle's engine control module software to resolve any bugs.

  • Total: $50 - $100
  • Success rate: 70%
Money-Saving Tips for B0975
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B0975 Diagnosis Process

Follow these systematic steps to accurately diagnose B0975. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion in the brake pedal position sensor circuit

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion in the brake pedal position sensor circuit. This should take about 5-10 minutes.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context, which usually takes about 10-15 minutes

Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context, which usually takes about 10-15 minutes.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter or specific diagnostic tools to test the brake pedal position sensor and associated wiring

Step 3: Component testing - Use a multimeter or specific diagnostic tools to test the brake pedal position sensor and associated wiring. This can take 20-30 minutes.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - After any repairs, verify proper operation by testing the brake pedal's functionality and clearing the codes, taking around 10-15 minutes

Step 4: System function test - After any repairs, verify proper operation by testing the brake pedal's functionality and clearing the codes, taking around 10-15 minutes.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Finally, drive the vehicle under various conditions to confirm that the issue has been resolved

Step 5: Road test verification - Finally, drive the vehicle under various conditions to confirm that the issue has been resolved. This may take about 15-20 minutes.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Brake Pedal Position Sensor Replacement on a 2017 Honda Accord

Vehicle: 2017 Honda Accord, 50,000 miles

Problem: Customer reported persistent check engine light and brake lights staying on.

Diagnosis: After running diagnostics with the GeekOBD APP and visual inspections, a faulty brake pedal position sensor was identified.

Solution: Replaced the brake pedal position sensor and cleared the codes. The brake lights functioned normally post-repair.

Cost: $250 (sensor $200, labor $50)

Result: The issue was resolved, and the customer reported no further problems.

Case Study 2: Wiring Issues in a 2018 Toyota Camry

Vehicle: 2018 Toyota Camry, 30,000 miles

Problem: The vehicle had erratic brake lights and shifting issues.

Diagnosis: The GeekOBD APP revealed error code B0975. A visual inspection showed frayed wiring near the sensor.

Solution: Repaired the wiring and replaced the connector to ensure a secure connection.

Cost: $150 (wiring repair $100, labor $50)

Result: Successful repair with no recurrence of the issues.

Diagnose B0975

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B0975
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes