B0CFC - Understanding the B0CFC Code in 2016-2020 Jeep Cherokee and Other Models

Quick Answer

B0CFC means: The B0CFC code indicates an issue with the body control module (BCM) or related systems in your vehicle.

Fix: Check and replace faulty components Cost: $300 - $700 Time: 90-180 minutes

Can I drive with B0CFC? Immediate attention is recommended to avoid safety risks.

Common Questions

What does B0CFC mean and how does it affect my car?

The B0CFC code signifies a problem with your vehicle's body control module, which can affect various electrical systems. This can lead to issues with lighting, door locks, and more, potentially compromising safety and convenience if not addressed.

What are the most common causes of B0CFC and how much does it cost to fix?

Common causes include a faulty body control module (BCM), damaged wiring, and sensor malfunctions. Repair costs can range from $100 for simple wiring repairs to $700 for BCM replacement, depending on the severity of the issue.

Can I drive my car with B0CFC or should I stop immediately?

Driving with a B0CFC code is not recommended as it may lead to failures in critical systems. If you notice any symptoms like flickering lights or non-responsive locks, it’s best to have your vehicle checked as soon as possible.

How can I diagnose B0CFC myself using GeekOBD APP?

To diagnose B0CFC using the GeekOBD APP, first connect the app to your vehicle's OBD2 port. Run a scan to retrieve codes and analyze the freeze frame data for context. This will help you understand the nature of the fault and guide your next steps.

What vehicles are most commonly affected by B0CFC?

The B0CFC code is frequently seen in models like the 2016-2020 Jeep Cherokee, Chrysler 300, and Dodge Durango. It's wise to check for any recalls or technical service bulletins (TSBs) associated with your specific model.

How can I prevent B0CFC from happening again?

Regularly inspect your vehicle's wiring and connectors, especially in areas prone to moisture. Keeping the BCM clean and dry can also help, along with timely updates to your vehicle's software when available.

What is B0CFC?

The B0CFC diagnostic trouble code (DTC) is a manufacturer-specific code primarily associated with the body control module (BCM) or a related system in vehicles like the 2016-2020 Jeep Cherokee. This code indicates a malfunction within the vehicle's body control system, which can affect features such as lighting, door locks, and other electrical accessories. A B0CFC code typically arises when the BCM detects a fault in one or more of its monitored circuits or sensors. Common issues associated with this code can include problems like faulty wiring, short circuits, or component failures. Ignoring the B0CFC code can lead to more severe electrical issues or complete failures of critical systems. It is crucial to address the problem promptly to prevent further complications that could affect vehicle safety and functionality. Car owners should also be aware that while the B0CFC code can be somewhat generic, its implications can vary significantly based on the make and model of the vehicle, so a thorough diagnostic approach is necessary to identify the root cause effectively.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B0CFC is present:

  • The check engine light remains illuminated, which can be distracting and indicates a need for inspection.
  • Interior lights may flicker or fail to operate properly, impacting visibility and convenience.
  • Power door locks may become unresponsive, compromising vehicle security and ease of entry.
  • The vehicle may exhibit intermittent electrical failures, such as radio malfunction or dashboard display issues, affecting overall driving experience.
  • Erratic behavior of other accessories like power windows or wipers, indicating possible BCM malfunction.

Possible Causes

Most common causes of B0CFC (ordered by frequency):

  1. The most common cause of the B0CFC code is a faulty body control module (BCM), with a likelihood of about 40%. This can stem from manufacturing defects or wear over time.
  2. Another cause is damaged wiring or corroded connectors, which can account for approximately 30% of cases. Corrosion often occurs due to exposure to moisture or road salt, leading to electrical shorts.
  3. A third cause can be a malfunctioning sensor within the BCM circuit, with around 20% occurrence. Regular inspections can help prevent this by identifying issues early.
  4. Less commonly, a software glitch in the BCM might trigger the B0CFC code, which could be resolved with a simple software update or reprogramming.
  5. Rarely, environmental factors such as extreme temperatures can affect BCM performance, leading to temporary faults that trigger the B0CFC code.

B0CFC Repair Costs

Cost Breakdown by Repair Type

BCM Replacement

Replacing the faulty body control module with a new or refurbished unit.

  • Total: $300 - $700
  • Success rate: 85%
Wiring Repair

Repairing or replacing damaged wiring and connectors related to the BCM.

  • Total: $100 - $300
  • Success rate: 75%
Money-Saving Tips for B0CFC
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B0CFC Diagnosis Process

Follow these systematic steps to accurately diagnose B0CFC. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Conduct an initial visual inspection of the BCM and associated wiring for any obvious damage or corrosion, which usually takes around 5-10 minutes

Step 1: Conduct an initial visual inspection of the BCM and associated wiring for any obvious damage or corrosion, which usually takes around 5-10 minutes.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: Utilize the GeekOBD APP to perform an OBD2 scan, retrieving all trouble codes and freeze frame data to understand the fault context, estimated time 10-15 minutes

Step 2: Utilize the GeekOBD APP to perform an OBD2 scan, retrieving all trouble codes and freeze frame data to understand the fault context, estimated time 10-15 minutes.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Perform component testing using a multimeter or appropriate diagnostic tools to check the integrity of the BCM and related circuits, which may take 20-30 minutes

Step 3: Perform component testing using a multimeter or appropriate diagnostic tools to check the integrity of the BCM and related circuits, which may take 20-30 minutes.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: After repairs, conduct a system function test to ensure that the BCM and its components are operating correctly, typically requiring 10-15 minutes

Step 4: After repairs, conduct a system function test to ensure that the BCM and its components are operating correctly, typically requiring 10-15 minutes.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Finally, complete a road test under varying conditions to validate the repair and confirm that the B0CFC code does not reappear, lasting about 15-20 minutes

Step 5: Finally, complete a road test under varying conditions to validate the repair and confirm that the B0CFC code does not reappear, lasting about 15-20 minutes.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: BCM Replacement on a 2018 Jeep Cherokee

Vehicle: 2018 Jeep Cherokee, 45,000 miles

Problem: Customer reported unresponsive interior lights and power door locks.

Diagnosis: Using the GeekOBD APP, the B0CFC code was retrieved, indicating a BCM fault. Visual inspection revealed corrosion on connectors.

Solution: Replaced the BCM and cleaned all affected connectors.

Cost: $600 (BCM $500, labor $100)

Result: Issue resolved; all systems functioned correctly post-repair.

Case Study 2: Wiring Repair on a 2019 Dodge Durango

Vehicle: 2019 Dodge Durango, 30,000 miles

Problem: Owner noticed intermittent dashboard display failures and flickering lights.

Diagnosis: Diagnostic scan showed B0CFC; wiring inspection revealed frayed wires near the BCM.

Solution: Repaired the damaged wiring and ensured proper connections.

Cost: $200 (labor $100, parts $100)

Result: Electrical issues eliminated; vehicle operating normally.

Diagnose B0CFC

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B0CFC
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes