B0D37 - Understanding DTC B0D37: Common Issues in 2017-2020 Ford Fusions and Other Models

Quick Answer

B0D37 means: B0D37 indicates a malfunction in the battery temperature sensor system.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with B0D37? Address immediately to prevent potential battery damage.

Common Questions

What does B0D37 mean and how does it affect my car?

The B0D37 code indicates a problem with the battery temperature sensor, which is essential for monitoring battery health. If this sensor fails, you may experience decreased battery performance and overall vehicle efficiency. Long-term neglect of this issue can lead to further damage to your vehicle's battery and electrical system.

What are the most common causes of B0D37 and how much does it cost to fix?

The most common cause of the B0D37 code is a faulty battery temperature sensor, which can cost between $150 and $300 to replace. Other causes include wiring issues and software glitches, which can vary in repair costs from $100 to $250.

Can I drive my car with B0D37 or should I stop immediately?

While you may be able to drive with the B0D37 code, it's advisable to address it promptly. Continuing to drive could lead to battery overheating or failure, which may leave you stranded.

How can I diagnose B0D37 myself using GeekOBD APP?

To diagnose B0D37 using the GeekOBD APP, first connect the app to your vehicle's OBD2 port. Then, retrieve the trouble codes and examine any freeze-frame data related to the B0D37 code, and check for any other related codes that may provide additional context.

What vehicles are most commonly affected by B0D37?

The B0D37 code is commonly seen in hybrid and electric vehicles, particularly the 2017-2020 Ford Fusion Hybrid, among others. If your vehicle is equipped with advanced battery management systems, it could be susceptible to this code.

How can I prevent B0D37 from happening again?

To prevent the B0D37 code from recurring, ensure regular maintenance of your vehicle's electrical and battery systems. Keep the battery connections clean, and consider periodic inspections of the battery and its management systems, especially if you live in extreme weather conditions.

What is B0D37?

DTC B0D37 is a diagnostic trouble code that usually indicates an issue with the vehicle's battery management system, particularly related to the battery temperature sensor. This code often appears in vehicles equipped with advanced battery systems, such as hybrid or electric models, including the 2017-2020 Ford Fusion Hybrid. When this code is triggered, it means that the vehicle's onboard diagnostic system has detected a malfunction in monitoring the battery's temperature, which is crucial for optimal performance and longevity. If a battery temperature sensor fails, it can lead to incorrect readings, which may prevent the vehicle from charging properly or could even cause the battery to overheat. Drivers may notice a decline in fuel efficiency, increased battery wear, and in severe cases, it could lead to battery failure or reduced vehicle performance. Addressing this code promptly is essential to maintain the health of the vehicle's battery and ensure reliable operation. Ignoring this trouble code could result in more severe issues down the line, making it imperative to act quickly if you see the B0D37 code illuminated on your dashboard.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B0D37 is present:

  • Check engine light stays on constantly, indicating a persistent issue with the battery management system.
  • Battery performance drops, leading to more frequent jump starts or battery replacements.
  • Fuel economy decreased by 10-15%, as the vehicle may not be utilizing battery power efficiently.
  • Erratic charging patterns observed where the battery does not charge fully or discharges too quickly.
  • Unusual battery heating during operation, which can be felt by touch or indicated on the dashboard.

Possible Causes

Most common causes of B0D37 (ordered by frequency):

  1. Faulty battery temperature sensor (60% likelihood) - This is the most common cause, where the sensor fails to provide accurate readings, leading to improper battery management.
  2. Wiring issues or poor connections (25% likelihood) - Damaged or corroded wires can interrupt the signal from the battery temperature sensor.
  3. Software glitches in the vehicle's computer system (10% likelihood) - Sometimes, the issue is not hardware-related but instead stems from outdated software that needs to be updated.
  4. Less common but serious cause: Battery management module failure (4% likelihood) - This is a critical component that can lead to significant operational issues if it malfunctions.
  5. Rare but possible cause: Environmental factors (1% likelihood) - Extreme temperatures can temporarily affect sensor readings.

B0D37 Repair Costs

Cost Breakdown by Repair Type

Battery Temperature Sensor Replacement

Replacing the faulty battery temperature sensor with a new OEM part.

  • Total: $150 - $300
  • Success rate: 95%
Wiring Repair

Repairing or replacing damaged wiring or poor connections related to the sensor.

  • Total: $100 - $250
  • Success rate: 90%
Money-Saving Tips for B0D37
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B0D37 Diagnosis Process

Follow these systematic steps to accurately diagnose B0D37. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze-frame data to understand the fault context (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze-frame data to understand the fault context (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter or specific diagnostic tools to test the battery temperature sensor and its wiring (20-30 minutes)

Step 3: Component testing - Use a multimeter or specific diagnostic tools to test the battery temperature sensor and its wiring (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - Verify proper operation after repairs and clear codes using the GeekOBD APP (10-15 minutes)

Step 4: System function test - Verify proper operation after repairs and clear codes using the GeekOBD APP (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm that the repair was successful and the warning light does not reappear (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm that the repair was successful and the warning light does not reappear (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Battery Temperature Sensor Replacement in 2018 Ford Fusion Hybrid

Vehicle: 2018 Ford Fusion Hybrid, 45,000 miles

Problem: Customer reported persistent check engine light and decreased fuel efficiency.

Diagnosis: After scanning with the GeekOBD APP, the B0D37 code was confirmed, indicating a faulty battery temperature sensor.

Solution: Replaced the battery temperature sensor and cleared the diagnostic codes.

Cost: $220 (parts: $150 for sensor, $70 for labor)

Result: The check engine light was resolved, and fuel efficiency improved by 15%.

Case Study 2: Wiring Repair for B0D37 in 2019 Chevrolet Volt

Vehicle: 2019 Chevrolet Volt, 30,000 miles

Problem: Vehicle exhibited erratic battery charging and check engine light illumination.

Diagnosis: Diagnostic testing revealed a B0D37 code due to a frayed wire connection to the battery management system.

Solution: Repaired the damaged wiring and ensured all connections were secure.

Cost: $180 (parts: $30 for wiring, $150 for labor)

Result: The vehicle performed normally after the repair, with no reoccurrence of the check engine light.

Diagnose B0D37

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B0D37
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes