B0D67 - Understanding the OBD2 Code for 2016-2020 Ford Explorer and Other Models

Quick Answer

B0D67 means: B0D67 indicates an issue with the body control module (BCM) in your vehicle.

Fix: Check and replace faulty components Cost: $300 - $600 Time: 90-180 minutes

Can I drive with B0D67? Immediate attention is recommended to prevent further electronic issues.

Common Questions

What does B0D67 mean and how does it affect my car?

The B0D67 code indicates a malfunction in the body control module, which can lead to various electronic failures in your vehicle. This code affects systems like lighting and power windows, potentially making your vehicle unsafe or inconvenient to drive. Over time, ignoring this code can lead to more severe issues, such as complete electronic failure or battery drain.

What are the most common causes of B0D67 and how much does it cost to fix?

Common causes of B0D67 include a faulty BCM, damaged wiring, or software glitches. Repair costs can vary significantly; replacing the BCM may cost between $300 and $600, while wiring repairs might range from $100 to $300. A software update could be a more affordable fix, costing between $50 and $150.

Can I drive my car with B0D67 or should I stop immediately?

It's advisable to address the B0D67 code promptly. While you may still be able to drive your vehicle, the risk of losing critical electronic functions increases. Continuing to drive could lead to safety issues or more extensive repairs down the line.

How can I diagnose B0D67 myself using GeekOBD APP?

Using the GeekOBD APP, you can perform a diagnostic scan to retrieve the B0D67 code and any related codes. The app will also provide freeze frame data, which captures the vehicle's state when the code was triggered. This information can help you understand the context of the fault and guide you in troubleshooting.

What vehicles are most commonly affected by B0D67?

Vehicles most commonly affected by B0D67 include the 2016-2020 Ford Explorer, as well as several other Ford models from that era. Always check for any recalls or technical service bulletins (TSBs) related to your specific vehicle to see if this issue has been officially recognized.

How can I prevent B0D67 from happening again?

To prevent B0D67, ensure regular maintenance of your vehicle's electrical systems, including periodic inspections of wiring and connectors. Keeping your software updated through your dealership can also help prevent glitches in the BCM.

What is B0D67?

DTC B0D67 is a diagnostic trouble code that indicates an issue within the vehicle's body control module (BCM). This code is commonly encountered in vehicles like the 2016-2020 Ford Explorer and several other models across the Ford lineup. The BCM plays a crucial role in managing various electronic systems within the vehicle, including lighting, power windows, and door locks. When the BCM identifies a malfunction, it triggers the B0D67 code to alert the driver and technicians about a potential problem. This code may manifest due to faulty sensors, wiring issues, or software glitches. Ignoring B0D67 can lead to further electronic failures, including inoperative features such as headlights or dashboard lights. The code can also lead to battery drain if the BCM is malfunctioning and fails to shut off non-essential electronics when the vehicle is off. For those experiencing this code, it's essential to address it promptly to maintain overall vehicle functionality and avoid escalating repair costs.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B0D67 is present:

  • Check engine light stays on constantly, indicating a persistent issue that needs attention.
  • Power windows may stop functioning correctly, leading to inconvenience and potential safety issues.
  • Interior lights may flicker or fail to turn on, affecting visibility and safety inside the vehicle.
  • Dashboard lights may not work, making it difficult to monitor vehicle performance and warnings.
  • Battery drain may occur if the BCM fails to manage electrical components properly.

Possible Causes

Most common causes of B0D67 (ordered by frequency):

  1. Faulty body control module (BCM) - This is the most common cause, with a likelihood of about 40%. The BCM can fail due to wear and tear or manufacturing defects.
  2. Damaged wiring or connectors - Approximately 30% of the time, B0D67 is triggered by frayed wires or loose connections that disrupt communication between the BCM and other components.
  3. Software glitches - Around 20% of cases may involve outdated or buggy software within the BCM, which can often be resolved with a software update.
  4. Corroded connectors - Less common but serious, corrosion in electrical connectors can lead to intermittent failures, with a likelihood of about 5%.
  5. Faulty sensors - Rarely, malfunctioning sensors that report incorrect data to the BCM can trigger this code.

B0D67 Repair Costs

Cost Breakdown by Repair Type

BCM Replacement

Replacing the faulty body control module with a new one.

  • Total: $300 - $600
  • Success rate: 90%
Wiring Repair

Repairing or replacing damaged wiring and connectors.

  • Total: $100 - $300
  • Success rate: 80%
Software Update

Updating the BCM software to the latest version to fix glitches.

  • Total: $50 - $150
  • Success rate: 70%
Money-Saving Tips for B0D67
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B0D67 Diagnosis Process

Follow these systematic steps to accurately diagnose B0D67. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Use the app to retrieve all codes and freeze frame data, providing context for the fault (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Use the app to retrieve all codes and freeze frame data, providing context for the fault (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Utilize a multimeter or specific diagnostic tools to test the BCM and associated components (20-30 minutes)

Step 3: Component testing - Utilize a multimeter or specific diagnostic tools to test the BCM and associated components (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - Verify the proper operation of the BCM and clear codes to see if they return (10-15 minutes)

Step 4: System function test - Verify the proper operation of the BCM and clear codes to see if they return (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success and monitor for recurring codes (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success and monitor for recurring codes (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Ford Explorer BCM Replacement

Vehicle: 2018 Ford Explorer, 75,000 miles

Problem: Customer reported power windows malfunction and flickering dashboard lights.

Diagnosis: After running a diagnostic with the GeekOBD APP, B0D67 was confirmed. An inspection revealed a faulty BCM.

Solution: Replaced the BCM with a new part and performed a software update.

Cost: $500 (parts: $400, labor: $100)

Result: All electronic functions returned to normal, and the customer reported no further issues.

Case Study 2: Wiring Repair on 2017 Ford Fusion

Vehicle: 2017 Ford Fusion, 65,000 miles

Problem: Customer experienced intermittent issues with the interior lights and alarm system.

Diagnosis: Diagnostic scan revealed B0D67 due to damaged wiring harness connected to the BCM.

Solution: Repaired the damaged wiring and secured loose connectors.

Cost: $200 (parts: $50, labor: $150)

Result: Post-repair, all electronic systems functioned correctly, with no reappearance of the code.

Diagnose B0D67

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B0D67
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes