B0D6D - Understanding the Chassis Control Module Error for 2015-2019 Ford F-150

Quick Answer

B0D6D means: B0D6D indicates a malfunction in the chassis control module.

Fix: Check and replace faulty components Cost: $400 - $800 Time: 90-180 minutes

Can I drive with B0D6D? Immediate attention is advised to ensure safety and vehicle performance.

Common Questions

What does B0D6D mean and how does it affect my car?

The B0D6D code indicates a malfunction in the chassis control module, crucial for handling and stability. If not addressed, it can lead to compromised vehicle performance, affecting safety, especially during acceleration or turns.

What are the most common causes of B0D6D and how much does it cost to fix?

Common causes include a faulty chassis control module, damaged wiring, or battery issues. Repair costs can range from $100 for simple wiring repairs to $800 for module replacement, depending on the issue severity.

Can I drive my car with B0D6D or should I stop immediately?

It's advisable to avoid driving your vehicle with the B0D6D code active, as it may lead to handling issues and diminished safety. Seek immediate diagnosis and repairs to ensure safety.

How can I diagnose B0D6D myself using GeekOBD APP?

Using the GeekOBD APP, you can scan for trouble codes, review freeze frame data, and monitor real-time vehicle parameters. Look for any abnormalities in the chassis control module data to pinpoint the issue.

What vehicles are most commonly affected by B0D6D?

The B0D6D code is frequently seen in the 2015-2019 Ford F-150, among other models that utilize similar chassis control systems. Check for any manufacturer recalls related to this code.

How can I prevent B0D6D from happening again?

Regular maintenance of your vehicle's electrical system, including battery checks and keeping wiring connections clean and secure, can help prevent B0D6D from recurring.

What is B0D6D?

The diagnostic trouble code (DTC) B0D6D refers to an issue detected within the chassis control module of your vehicle. This code is particularly common in models such as the 2015-2019 Ford F-150 and may indicate a malfunction in the communication between the chassis control module and other vehicle systems. In simpler terms, the chassis control module is responsible for various functions, including stability control and traction management. When a fault is detected, it triggers the check engine light and may lead to reduced vehicle performance. Real-world implications include issues like compromised handling, unexpected traction loss, or even stability control failure, which can pose safety risks if not addressed promptly. Understanding this code's implications is essential for vehicle owners, especially those using their trucks for towing or off-road activities where stability and traction are crucial. Ignoring this code can lead to more severe problems down the line, so it's advisable to act quickly if you encounter it.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B0D6D is present:

  • Check Engine light remains illuminated, indicating a fault in the chassis control module.
  • Unusual handling characteristics, such as swaying or drifting unexpectedly during turns.
  • Traction control system light activates frequently, suggesting loss of traction.
  • Difficulty in engaging or disengaging the four-wheel drive system, impacting off-road capabilities.
  • Reduced fuel efficiency, potentially due to the chassis control module affecting engine management.

Possible Causes

Most common causes of B0D6D (ordered by frequency):

  1. The most common cause of the B0D6D code is a faulty chassis control module, with a likelihood of about 60%. This can arise from electrical issues or software malfunctions.
  2. Another potential cause is damaged wiring or connectors related to the chassis control module, which can lead to communication failures between different vehicle systems.
  3. Issues with the vehicle's battery, particularly low voltage or poor connections, can also trigger this code. Regular maintenance of the battery and electrical system is advised to prevent these issues.
  4. Less common, but serious causes include software glitches in the chassis control module itself, requiring an update or reprogramming to resolve.
  5. A rare cause could be water ingress into the chassis control module housing, which can occur in vehicles subjected to severe weather or flooding.

B0D6D Repair Costs

Cost Breakdown by Repair Type

Chassis Control Module Replacement

Replacing the chassis control module with a new or remanufactured unit, which can resolve the B0D6D code.

  • Total: $400 - $800
  • Success rate: 85%
Software Update

Updating the chassis control module software to fix glitches and improve performance.

  • Total: $100 - $200
  • Success rate: 75%
Wiring Repair

Repairing or replacing damaged wiring/connectors linked to the chassis control module.

  • Total: $100 - $300
  • Success rate: 70%
Money-Saving Tips for B0D6D
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B0D6D Diagnosis Process

Follow these systematic steps to accurately diagnose B0D6D. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for any signs of physical damage to wiring, loose connections, or corrosion around the chassis control module, taking about 5-10 minutes

Step 1: Initial visual inspection - Check for any signs of physical damage to wiring, loose connections, or corrosion around the chassis control module, taking about 5-10 minutes.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Use the GeekOBD APP to retrieve all trouble codes and freeze frame data, which helps in understanding the context of the fault, requiring roughly 10-15 minutes

Step 2: OBD2 scan with GeekOBD APP - Use the GeekOBD APP to retrieve all trouble codes and freeze frame data, which helps in understanding the context of the fault, requiring roughly 10-15 minutes.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Utilize a multimeter or specialized diagnostic tools to test the chassis control module and associated wiring for continuity and proper voltage (20-30 minutes)

Step 3: Component testing - Utilize a multimeter or specialized diagnostic tools to test the chassis control module and associated wiring for continuity and proper voltage (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - After performing any repairs, verify the operational integrity of the chassis control module and clear any codes, taking 10-15 minutes

Step 4: System function test - After performing any repairs, verify the operational integrity of the chassis control module and clear any codes, taking 10-15 minutes.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Conduct a road test under various driving conditions to ensure the repair was successful and that no warning lights reappear (15-20 minutes)

Step 5: Road test verification - Conduct a road test under various driving conditions to ensure the repair was successful and that no warning lights reappear (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Chassis Control Module Replacement on 2017 Ford F-150

Vehicle: 2017 Ford F-150, 65,000 miles

Problem: Customer reported the check engine light was on, and the vehicle exhibited erratic handling.

Diagnosis: Diagnostic scan revealed B0D6D code. Visual inspection confirmed faulty chassis control module.

Solution: Replaced the chassis control module with a new unit and cleared the codes.

Cost: $750 (parts: $600, labor: $150)

Result: Vehicle handled normally post-repair, and the check engine light remained off.

Case Study 2: Wiring Repair on 2016 Ford Explorer

Vehicle: 2016 Ford Explorer, 45,000 miles

Problem: Customer experienced traction control issues and warning lights.

Diagnosis: B0D6D code present; inspection found corroded wiring harness connected to the chassis control module.

Solution: Repaired wiring connections and replaced damaged sections.

Cost: $250 (parts: $50, labor: $200)

Result: Traction control function restored, and all warning lights cleared.

Diagnose B0D6D

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B0D6D
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes