B1059 - Airbag Circuit Malfunction in Popular Vehicles like Honda and Toyota

Quick Answer

B1059 means: B1059 indicates an airbag circuit malfunction, often preventing airbags from deploying.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with B1059? Immediate attention is recommended to ensure airbag functionality.

Common Questions

What does B1059 mean and how does it affect my car?

The B1059 code indicates that there is an issue with the airbag circuit. This malfunction can prevent airbags from deploying in an accident, posing a serious safety risk. It's crucial to address this issue to ensure that your airbag system functions correctly.

What are the most common causes of B1059 and how much does it cost to fix?

The most common cause is a faulty airbag sensor, which may cost between $150 to $300 to replace. Damaged wiring could cost around $100 to $200 to fix, while replacing the airbag control module can range from $300 to $600. Always seek professional help for accurate diagnosis.

Can I drive my car with B1059 or should I stop immediately?

It is not advisable to drive your car if the B1059 code is present, as this indicates a malfunction in the airbag system. Driving in this condition can compromise your safety, and it's best to have the issue diagnosed and repaired before using the vehicle.

How can I diagnose B1059 myself using GeekOBD APP?

Using the GeekOBD APP, you can perform a diagnostic scan of your vehicle's OBD2 system. The app will display the B1059 code along with any related codes, allowing you to understand the severity of the issue and see any historical data related to the airbag system.

What vehicles are most commonly affected by B1059?

The B1059 code is commonly found in vehicles like the 2007-2012 Honda Accord, 2010-2015 Toyota Camry, and 2005-2018 Nissan Altima. Always check for recalls or Technical Service Bulletins related to airbag issues for your specific vehicle model.

How can I prevent B1059 from happening again?

Regular maintenance of your vehicle's electrical system, including checking connectors and wiring, can help prevent B1059 from occurring. Additionally, avoid exposing the vehicle to extreme conditions that could damage the airbag components, and ensure periodic inspections of the airbag system.

What is B1059?

The DTC B1059 code indicates a malfunction in the airbag system, specifically relating to the airbag circuit. This code can appear in various vehicles, including popular models from Honda, Toyota, and Nissan, typically produced between 2000 and 2020. When this code is triggered, it often means that there is an issue with the airbag sensor, wiring, or airbag control module. In real-world terms, a B1059 code often results in the airbag warning light illuminating on the dashboard, signaling that the airbag system may not deploy in the event of an accident. This situation poses a significant safety risk to you and your passengers, making it crucial to address the underlying issue promptly. Drivers may experience additional symptoms like intermittent airbag light activation or failure of the airbag system to respond correctly during diagnostic tests. Understanding the implications of a B1059 code is vital for maintaining vehicle safety and ensuring compliance with safety regulations. Therefore, getting this code diagnosed and repaired should be a priority for any vehicle owner to ensure that the airbag system is functioning as intended.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B1059 is present:

  • The airbag warning light illuminates constantly, indicating a fault in the airbag system.
  • You may notice that the airbags do not deploy during diagnostic tests, which signifies a serious safety concern.
  • The vehicle may experience intermittent electrical issues, such as flickering dashboard lights or trouble starting.
  • A noticeable increase in diagnostic trouble codes related to the airbag system may occur, indicating multiple issues.
  • In some cases, the vehicle's overall performance could be affected due to a compromised electrical system.

Possible Causes

Most common causes of B1059 (ordered by frequency):

  1. The most common cause of a B1059 code is a faulty airbag sensor, accounting for approximately 40% of occurrences. This can be due to wear and tear or exposure to moisture.
  2. Another frequent cause is damaged wiring or connectors within the airbag circuit, which can occur from physical damage or corrosion over time.
  3. In some cases, the airbag control module may be malfunctioning, which is less common but can lead to total system failure if not addressed.
  4. A less common but serious cause could be a deployment of the airbag system due to an accident, leading to the need for extensive repairs.
  5. Rarely, a software glitch in the vehicle's onboard computer could trigger the B1059 code, requiring a software update or reprogramming.

B1059 Repair Costs

Cost Breakdown by Repair Type

Airbag Sensor Replacement

Replacing a faulty airbag sensor that triggered the B1059 code.

  • Total: $150 - $300
  • Success rate: 85%
Wiring Repair

Repairing damaged wiring in the airbag circuit.

  • Total: $100 - $200
  • Success rate: 75%
Control Module Replacement

Replacing the airbag control module if it is found to be faulty.

  • Total: $300 - $600
  • Success rate: 90%
Money-Saving Tips for B1059
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B1059 Diagnosis Process

Follow these systematic steps to accurately diagnose B1059. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter or specific diagnostic tools to test suspected components, especially sensors and wiring (20-30 minutes)

Step 3: Component testing - Use a multimeter or specific diagnostic tools to test suspected components, especially sensors and wiring (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - Verify proper operation after repairs and clear codes using the GeekOBD APP (10-15 minutes)

Step 4: System function test - Verify proper operation after repairs and clear codes using the GeekOBD APP (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success and ensure the airbag system is operational (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success and ensure the airbag system is operational (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Honda Accord Airbag System Repair

Vehicle: 2010 Honda Accord, 85,000 miles

Problem: Customer reported airbag light on constantly and no airbag deployment during diagnostics.

Diagnosis: Performed visual inspection and found damaged wiring near the driver's seat.

Solution: Repaired the wiring and replaced the faulty airbag sensor.

Cost: $250 (including parts and labor)

Result: Airbag system operated normally post-repair, with no further issues.

Case Study 2: Toyota Camry Airbag Warning Light

Vehicle: 2015 Toyota Camry, 50,000 miles

Problem: Intermittent airbag warning light and sporadic electrical issues.

Diagnosis: Used GeekOBD APP to scan for codes and found B1059 along with other related codes.

Solution: Replaced the airbag control module after confirming it was malfunctioning.

Cost: $400 (specific cost breakdown included module and labor)

Result: Post-repair testing confirmed the airbag system was fully operational.

Diagnose B1059

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B1059
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes