Quick Answer
B1060 means: B1060 indicates a malfunction in the Body Control Module (BCM) of your vehicle.
Can I drive with B1060? It's advised to address this issue promptly to prevent further complications.
Common Questions
What does B1060 mean and how does it affect my car?
The B1060 code indicates a problem with your vehicle's Body Control Module (BCM). This module is responsible for various electronic functions, and a malfunction can lead to issues like non-functional power windows or lights. If ignored, it could affect your vehicle's safety features and overall functionality.
What are the most common causes of B1060 and how much does it cost to fix?
Common causes include a faulty BCM, damaged wiring, or software glitches. Repair costs can vary, with BCM replacements costing between $300 to $800 and wiring repairs ranging from $100 to $300.
Can I drive my car with B1060 or should I stop immediately?
While it may be possible to drive your vehicle temporarily with a B1060 code, it's not recommended. Malfunctions in the BCM can affect key safety functions, so it's best to get the issue diagnosed and repaired as soon as possible.
How can I diagnose B1060 myself using GeekOBD APP?
Using the GeekOBD APP, you can scan your vehicle for trouble codes and review freeze frame data to understand the context of the B1060 code. Look for other related codes and examine the vehicle's electrical systems for signs of malfunction.
What vehicles are most commonly affected by B1060?
The B1060 code is commonly reported in vehicles like the 2015-2018 Chevrolet Silverado, Ford F-150, and various other models from GM and Ford. Always check for any recalls or Technical Service Bulletins (TSBs) related to the BCM.
How can I prevent B1060 from happening again?
To prevent the B1060 code, ensure regular maintenance of your vehicle's electrical systems. Keep connections clean and free of corrosion, and consider periodic software updates to the BCM as recommended by your vehicle manufacturer.
What is B1060?
The Diagnostic Trouble Code (DTC) B1060 refers to a malfunction in the Body Control Module (BCM), which is a crucial component in modern vehicles responsible for controlling various electronic functions, including power windows, locks, and lighting systems. When the B1060 code is triggered, it indicates that there is a fault detected in the BCM or the communication between the BCM and other vehicle systems. This issue can arise from a variety of factors such as wiring problems, internal module failures, or even software issues. For vehicle owners, this can mean a range of symptoms from minor inconveniences, like malfunctioning lights, to more serious issues that may affect the vehicle's safety features. Common vehicles affected by this code include the 2015-2018 Chevrolet Silverado and various Ford F-Series models. If left unaddressed, the malfunction could lead to further electrical problems or even a complete failure of the BCM. Hence, understanding the implications of the B1060 code is crucial for the safety and functionality of your vehicle.
System: B - Body (Airbags, Lighting, Security, Climate Control)
Symptoms
Common symptoms when B1060 is present:
- Check engine light stays illuminated, indicating a potential electrical issue.
- Power windows or locks may not function correctly, leading to inconvenience.
- Exterior and interior lights may flicker or fail to operate as intended.
- Dashboard warning lights may behave erratically, indicating system malfunctions.
- Remote key fob may not work, preventing access to the vehicle.
Possible Causes
Most common causes of B1060 (ordered by frequency):
- The most common cause of the B1060 code is a faulty Body Control Module, which occurs in about 40% of cases. This can happen due to age, exposure to moisture, or electrical surges.
- Another common cause is damaged wiring or connectors leading to the BCM, accounting for about 30% of the cases. Corrosion or physical damage can disrupt communication.
- Software glitches can also trigger the B1060 code, especially in newer vehicles. Regular software updates are recommended to prevent this issue.
- Less common but serious causes include short circuits in the vehicle's electrical system, which can lead to more extensive damage if not addressed.
- A rare cause of the B1060 code is poor ground connections, which can lead to intermittent issues with the BCM and other electronic components.
B1060 Repair Costs
Cost Breakdown by Repair Type
BCM Replacement
Replacing the faulty Body Control Module with a new or refurbished unit.
- Total: $300 - $800
- Success rate: 85%
Wiring Repair
Repairing or replacing damaged wiring or connectors leading to the BCM.
- Total: $100 - $300
- Success rate: 75%
Money-Saving Tips for B1060
- Start with the most common and least expensive repairs first
- Use GeekOBD APP to confirm diagnosis before replacing expensive parts
- Consider preventive maintenance to avoid future occurrences
- Compare prices for OEM vs aftermarket parts based on your needs
- Address the issue promptly to prevent more expensive secondary damage
Diagnostic Steps
Professional B1060 Diagnosis Process
Follow these systematic steps to accurately diagnose B1060. Each step builds on the previous one to ensure accurate diagnosis.
Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes)
Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes).
Step 2: Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes)
Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes).
Step 3: Step 3: Component testing - Use a multimeter or specific diagnostic tools to test the BCM and related wiring (20-30 minutes)
Step 3: Component testing - Use a multimeter or specific diagnostic tools to test the BCM and related wiring (20-30 minutes).
Step 4: Step 4: System function test - Verify proper operation of all electronic systems controlled by the BCM after repairs and clear codes (10-15 minutes)
Step 4: System function test - Verify proper operation of all electronic systems controlled by the BCM after repairs and clear codes (10-15 minutes).
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success (15-20 minutes)
Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success (15-20 minutes).
Important Notes
- Always verify the repair with GeekOBD APP after completing diagnostic steps
- Clear codes and test drive to ensure the problem is resolved
- Address underlying causes to prevent code recurrence
Real Repair Case Studies
Case Study 1: BCM Replacement in a 2016 Chevrolet Silverado
Vehicle: 2016 Chevrolet Silverado, 45,000 miles
Problem: Customer reported that the headlights flickered and some electrical components failed to operate.
Diagnosis: After performing an OBD2 scan with the GeekOBD APP, the B1060 code was retrieved, indicating a BCM malfunction.
Solution: Replaced the BCM with a new unit and reprogrammed it according to manufacturer specifications.
Cost: $600 (BCM - $500, labor - $100)
Result: All electrical systems returned to normal operation, and the customer was satisfied with the repair.
Case Study 2: Wiring Repair in a 2017 Ford F-150
Vehicle: 2017 Ford F-150, 30,000 miles
Problem: Driver experienced erratic dashboard lights and non-functioning power locks.
Diagnosis: Diagnosis revealed damaged wiring leading to the BCM, triggering the B1060 code.
Solution: Repaired the wiring harness and secured loose connections.
Cost: $200 (labor - $100, parts - $100)
Result: Successfully resolved the issue, restoring full functionality to the vehicle's electrical systems.