B10C2 - Understanding the Diagnostic Trouble Code for 2015-2019 Ford F-150 and Other Models

Quick Answer

B10C2 means: B10C2 indicates a malfunction related to the rear passenger door latch in the Body Control Module.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with B10C2? Immediate attention is recommended to ensure door functionality and passenger safety.

Common Questions

What does B10C2 mean and how does it affect my car?

The B10C2 code indicates a malfunction with the rear passenger door latch, affecting the door’s ability to lock and unlock properly. This can compromise safety as the door may not secure fully, increasing risk while driving.

What are the most common causes of B10C2 and how much does it cost to fix?

Common causes include a faulty door latch, wiring issues, and corrosion. Repair costs typically range from $100 to $300, depending on the specific problem and parts needed.

Can I drive my car with B10C2 or should I stop immediately?

While you may drive your vehicle with a B10C2 code, it is advisable to address the issue promptly. Ignoring it could lead to safety hazards, especially if the door does not close securely.

How can I diagnose B10C2 myself using GeekOBD APP?

Using the GeekOBD APP, connect to your vehicle’s OBD2 port, scan for codes, and analyze freeze frame data to understand the conditions under which the B10C2 code was triggered.

What vehicles are most commonly affected by B10C2?

The B10C2 code is frequently reported in 2015-2019 Ford F-150 models, but it can also affect other Ford vehicles equipped with similar body control modules.

How can I prevent B10C2 from happening again?

Regular maintenance, including inspecting door latches and wiring for wear and corrosion, can help prevent the recurrence of the B10C2 code. Keeping the vehicle clean and dry will also minimize the risk of electrical issues.

What is B10C2?

The B10C2 diagnostic trouble code (DTC) indicates a fault within the vehicle's Body Control Module (BCM) related to the rear passenger door latch. This code is often triggered when the BCM detects an abnormal state or malfunction of the latch or wiring connected to it. For owners of vehicles like the 2015-2019 Ford F-150, this issue can manifest as problems with the power locks, windows, or interior lights. If the latch is not functioning correctly, it could lead to safety concerns as the door may not secure properly, resulting in possible accidents or unwanted entry. Additionally, since this code pertains to the body control functions, you might notice other symptoms, including erratic behavior of interior lights or issues with the vehicle’s electrical systems. Addressing a B10C2 code promptly is essential to ensure safety and maintain the vehicle's functionality.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B10C2 is present:

  • The vehicle's check engine light may remain illuminated, indicating that the onboard diagnostics system has detected an issue.
  • Power locks may fail to operate correctly, leading to the inability to lock or unlock the rear passenger door from the driver's side.
  • You might experience electrical issues, such as the interior lights flickering or not turning on when the door is opened.
  • The rear passenger door may not close securely, increasing the risk of it opening while driving.
  • Inconsistent operation of power windows in the rear, affecting their ability to go up or down as intended.

Possible Causes

Most common causes of B10C2 (ordered by frequency):

  1. The most common cause is a faulty rear passenger door latch, which accounts for approximately 60% of B10C2 occurrences. This can result from wear and tear or physical damage.
  2. A wiring issue, such as frayed or shorted wires in the door harness, can also trigger this code. This occurs in about 25% of cases and can be caused by moisture intrusion or physical damage.
  3. Corrosion at the connection point between the latch and the BCM can lead to this diagnostic code, which may happen in older vehicles or those exposed to harsh environments.
  4. Less common but serious causes include a malfunctioning Body Control Module itself, which could require replacement if diagnosed.
  5. A rare cause could be software glitches in the BCM, which may necessitate a software update to resolve.

B10C2 Repair Costs

Cost Breakdown by Repair Type

Rear Door Latch Replacement

Replacing the faulty rear passenger door latch with a new OEM part.

  • Total: $150 - $300
  • Success rate: 90%
Wiring Repair

Repairing or replacing damaged wiring in the door harness.

  • Total: $100 - $250
  • Success rate: 80%
Money-Saving Tips for B10C2
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B10C2 Diagnosis Process

Follow these systematic steps to accurately diagnose B10C2. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Initial visual inspection - Check the rear passenger door and surrounding area for obvious signs of damage or wear (5-10 minutes)
GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: OBD2 scan with GeekOBD APP - Use the GeekOBD APP to retrieve all codes and freeze frame data for a comprehensive understanding of the fault context (10-15 minutes)
GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Component testing - Employ a multimeter to check for voltage and continuity in the wiring connected to the rear door latch (20-30 minutes)
GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: System function test - After any repairs, verify the operation of the rear door latch and clear the codes to ensure the issue is resolved (10-15 minutes)
GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Road test verification - Drive the vehicle under various conditions to confirm that the door functions correctly and that the DTC does not reappear (15-20 minutes)
GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Successful Repair of B10C2 on 2017 Ford F-150

Vehicle: 2017 Ford F-150, 45,000 miles

Problem: Customer reported that the rear passenger door was not locking properly.

Diagnosis: After scanning with the GeekOBD APP, the B10C2 code was identified. Visual inspection revealed a damaged latch.

Solution: Replaced the faulty rear door latch and performed a system function test.

Cost: $200 (including parts and labor)

Result: Customer reported that the door now locks securely and the warning light was cleared successfully.

Case Study 2: Wiring Issue Resolved for 2018 Ford Escape

Vehicle: 2018 Ford Escape, 30,000 miles

Problem: Customer experienced intermittent locking issues with the rear passenger door and a B10C2 code.

Diagnosis: Using the GeekOBD APP, it was confirmed that the wiring had corroded, leading to the failure.

Solution: Repaired the wiring harness and replaced a damaged connector.

Cost: $150 (including parts and labor)

Result: The issue was resolved, and the vehicle operated normally without any further issues.

Diagnose B10C2

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B10C2
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes