Quick Answer

C0583 means: C0583 signifies a communication error with the steering control module, affecting power steering functionality.

Fix: Check and replace faulty components Cost: $300 - $800 Time: 90-180 minutes

Can I drive with C0583? Immediate attention is recommended to ensure safe vehicle operation.

Common Questions

What does C0583 mean and how does it affect my car?

C0583 indicates a communication error with your vehicle's steering control module. This issue can lead to difficulties in steering, making it harder to control your vehicle, especially at low speeds. If ignored, it could compromise your safety and lead to further damage.

What are the most common causes of C0583 and how much does it cost to fix?

Common causes include a faulty steering control module, wiring issues, and software glitches. Repair costs can range from $50 for software updates to $800 for module replacements, depending on the severity of the issue.

Can I drive my car with C0583 or should I stop immediately?

It's not advisable to drive your vehicle with C0583, as it can lead to unpredictable steering behavior. Immediate attention is recommended to ensure your safety.

How can I diagnose C0583 myself using GeekOBD APP?

Using the GeekOBD APP, you can scan for diagnostic codes, view freeze frame data, and monitor the performance of your steering system to identify issues accurately.

What vehicles are most commonly affected by C0583?

C0583 is frequently seen in 2012-2018 Chevrolet Malibu models, but it can also affect other GM vehicles like the Chevrolet Impala and Buick LaCrosse.

How can I prevent C0583 from happening again?

To prevent C0583, ensure regular maintenance checks, especially for wiring and connectors. Address any electrical issues promptly and consider software updates if available.

What is C0583?

The Diagnostic Trouble Code (DTC) C0583 indicates a communication error with the steering control module. This code is prevalent in various GM models, especially the Chevrolet Malibu from 2012 to 2018. When this code is triggered, it usually signifies that the vehicle's Electronic Power Steering (EPS) system is unable to communicate effectively with the vehicle's Engine Control Module (ECM) or other essential systems. The EPS system is crucial for providing assistance to the driver while steering, making it easier to maneuver the vehicle at low speeds and enhancing stability at higher speeds. A malfunction in this system can lead to various issues, such as increased steering effort, unresponsive steering, or even complete loss of power steering assist. In some cases, the steering wheel may become overly sensitive or require more effort to turn than usual. If left unaddressed, driving with this code can compromise safety and lead to further vehicle damage. Therefore, understanding the implications of C0583 and seeking timely repairs is essential for maintaining a safe driving experience.

System: C - Chassis (ABS, Steering, Suspension)

Symptoms

Common symptoms when C0583 is present:

  • The check engine light illuminates alongside the power steering warning light, indicating a malfunction in the steering system.
  • Drivers may experience difficulty in steering, especially at low speeds, feeling as if the steering is heavier than normal.
  • Inconsistent steering responsiveness can occur, where the vehicle may suddenly feel overly sensitive or sluggish when turning.
  • Some vehicles may exhibit a buzzing or clicking noise from the steering column when the error occurs.
  • In more severe cases, the steering system may fail completely, making it unsafe to drive.

Possible Causes

Most common causes of C0583 (ordered by frequency):

  1. {'cause': 'Faulty steering control module', 'likelihood': '40%', 'details': 'The steering control module is responsible for interpreting driver inputs and sending signals to the EPS system. If it malfunctions, communication errors will arise.'}
  2. {'cause': 'Wiring issues or damaged connectors', 'technicalExplanation': 'Wiring harnesses can suffer from wear and tear, causing shorts or open circuits that prevent proper communication between modules.'}
  3. {'cause': 'Corroded pins in connectors', 'preventionTips': 'Regularly inspect and clean electrical connectors to prevent corrosion, which can lead to communication failures.'}
  4. {'cause': 'Software glitches in the steering control module', 'seriousness': 'A software update may be required to rectify communication issues resulting from bugs in the system.'}
  5. {'cause': 'Battery or alternator issues', 'rarity': 'While less common, voltage fluctuations can affect module performance and communication.'}

C0583 Repair Costs

Cost Breakdown by Repair Type

Steering Control Module Replacement

Replacing the faulty steering control module with a new part.

  • Total: $300 - $800
  • Success rate: 90%
Wiring Repair

Repairing damaged wiring or connectors to restore communication.

  • Total: $100 - $300
  • Success rate: 85%
Software Update

Updating the steering control module software to fix bugs.

  • Total: $50 - $150
  • Success rate: 75%
Money-Saving Tips for C0583
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional C0583 Diagnosis Process

Follow these systematic steps to accurately diagnose C0583. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Look for damaged wiring, loose connectors, or corrosion around the steering control module (5-10 minutes)

Step 1: Initial visual inspection - Look for damaged wiring, loose connectors, or corrosion around the steering control module (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context better (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context better (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter to test the steering control module and associated wiring for continuity and voltage (20-30 minutes)

Step 3: Component testing - Use a multimeter to test the steering control module and associated wiring for continuity and voltage (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - After repairs, verify that the EPS system operates correctly and clear all codes (10-15 minutes)

Step 4: System function test - After repairs, verify that the EPS system operates correctly and clear all codes (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to ensure the repair was successful and that no codes return (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to ensure the repair was successful and that no codes return (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Steering Control Module Replacement in 2016 Chevrolet Malibu

Vehicle: 2016 Chevrolet Malibu, 75,000 miles

Problem: Customer reported difficulty steering and illumination of the power steering warning light.

Diagnosis: Diagnostic scan revealed C0583, indicating a communication error with the steering control module. Visual inspection showed damaged wiring.

Solution: Replaced the steering control module and repaired wiring connections.

Cost: $650 (including parts and labor)

Result: Steering performance returned to normal, and no further issues were reported.

Case Study 2: Wiring Issues in 2014 Buick LaCrosse

Vehicle: 2014 Buick LaCrosse, 90,000 miles

Problem: Customer complained of intermittent steering assist and check engine light.

Diagnosis: Scan indicated C0583. Inspection revealed corroded connectors leading to communication failure.

Solution: Cleaned and repaired the connectors, ensuring a solid connection.

Cost: $120 (for wiring repair)

Result: The steering assist issue was resolved, and the customer reported smooth operation.

Diagnose C0583

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis

Code Information

Code: C0583
System: Chassis (ABS, Steering, Suspension)
Severity: HIGH
Category: Chassis Codes