Quick Answer
C063E means: C063E indicates a problem with the steering angle sensor circuit.
Can I drive with C063E? Immediate attention is recommended to ensure safe driving and prevent further issues.
Common Questions
What does C063E mean and how does it affect my car?
C063E indicates a problem with the steering angle sensor, which can affect vehicle handling and safety systems. If this issue is not addressed, it may lead to erratic steering behavior and compromised vehicle safety.
What are the most common causes of C063E and how much does it cost to fix?
The most common causes of C063E include a faulty steering angle sensor and wiring issues. Repair costs can range from $150 to $400, depending on the specific problem and vehicle model.
Can I drive my car with C063E or should I stop immediately?
While you can technically drive with a C063E code, it is not recommended due to potential safety risks. Erratic steering can lead to dangerous situations, so it's best to address the issue promptly.
How can I diagnose C063E myself using GeekOBD APP?
To diagnose C063E using the GeekOBD APP, first connect the app to your vehicle's OBD2 port. Perform a scan to check for the C063E code, then review the freeze frame data for context on when the code was triggered.
What vehicles are most commonly affected by C063E?
The C063E code is frequently seen in 2015-2018 Chevrolet Silverado and GMC Sierra models, particularly those equipped with advanced steering and safety features.
How can I prevent C063E from happening again?
Regular maintenance of the steering system, including periodic inspections of wiring and connectors, can help prevent C063E from recurring. Addressing any steering issues promptly can also minimize risks.
What is C063E?
The Diagnostic Trouble Code (DTC) C063E indicates a fault related to the steering angle sensor circuit in vehicles equipped with advanced driver assistance systems (ADAS). This code is particularly prevalent in models like the 2015-2018 Chevrolet Silverado and GMC Sierra. The steering angle sensor plays a crucial role in providing accurate information about the vehicle's steering position to the electronic control unit (ECU). When the C063E code is triggered, it suggests that the sensor's signal is either out of range or the sensor itself is malfunctioning. This can result in issues such as erratic steering behavior, activation of the stability control system, and potential impacts on safety features like lane departure warning and electronic stability control. If left unresolved, the vehicle may experience worsening handling characteristics and increased wear on suspension components, which can compromise safety and lead to costly repairs in the long run. Understanding the implications of the C063E code is essential for maintaining vehicle performance and safety.
System: C - Chassis (ABS, Steering, Suspension)
Symptoms
Common symptoms when C063E is present:
- Check engine light remains illuminated, indicating an ongoing problem with the steering angle sensor.
- Erratic steering response where the vehicle doesn't turn as expected, which can lead to dangerous driving conditions.
- Warning messages displayed on the dashboard related to the stability control system or steering assistance.
- Increased difficulty in steering, especially at low speeds, which could indicate sensor failure.
- Unusual tire wear patterns that may develop due to improper steering alignment caused by sensor issues.
Possible Causes
Most common causes of C063E (ordered by frequency):
- {'cause': 'Faulty steering angle sensor - 50% likelihood.', 'details': 'The most common reason for the C063E code is a malfunctioning steering angle sensor, which may fail due to wear and tear over time.'}
- {'cause': 'Wiring issues - 30% likelihood.', 'details': 'Damaged or corroded wiring within the steering column can disrupt the signal from the steering angle sensor to the ECU, triggering the C063E code.'}
- {'cause': 'Calibration errors - 15% likelihood.', 'details': 'In some cases, the steering angle sensor may need recalibration, especially after repair work involving the steering system.'}
- {'cause': 'Faulty ECU - 3% likelihood.', 'details': "A malfunction in the vehicle's ECU could misinterpret the data from the steering angle sensor, leading to the C063E code."}
- {'cause': 'Sensor alignment issues - 2% likelihood.', 'details': 'Improper installation or misalignment of the steering angle sensor can also cause this code to appear.'}
C063E Repair Costs
Cost Breakdown by Repair Type
Steering Angle Sensor Replacement
Replacing the faulty steering angle sensor is the most common solution to fix the C063E code. This involves removing the old sensor and installing a new one, followed by calibration.
- Total: $150 - $400
- Success rate: 85%
Money-Saving Tips for C063E
- Start with the most common and least expensive repairs first
- Use GeekOBD APP to confirm diagnosis before replacing expensive parts
- Consider preventive maintenance to avoid future occurrences
- Compare prices for OEM vs aftermarket parts based on your needs
- Address the issue promptly to prevent more expensive secondary damage
Diagnostic Steps
Professional C063E Diagnosis Process
Follow these systematic steps to accurately diagnose C063E. Each step builds on the previous one to ensure accurate diagnosis.
Step 1: Step 1: Perform an initial visual inspection of the steering column and surrounding wiring for obvious damage or loose connections (5-10 minutes)
Step 1: Perform an initial visual inspection of the steering column and surrounding wiring for obvious damage or loose connections (5-10 minutes).
Step 2: Step 2: Use the GeekOBD APP to perform an OBD2 scan to retrieve the C063E code and any related codes, along with freeze frame data for context (10-15 minutes)
Step 2: Use the GeekOBD APP to perform an OBD2 scan to retrieve the C063E code and any related codes, along with freeze frame data for context (10-15 minutes).
Step 3: Step 3: Test the steering angle sensor using a multimeter to check for proper voltage and resistance levels (20-30 minutes)
Step 3: Test the steering angle sensor using a multimeter to check for proper voltage and resistance levels (20-30 minutes).
Step 4: Step 4: If the sensor is deemed functional, verify its calibration using the GeekOBD APP; recalibrate if necessary (10-15 minutes)
Step 4: If the sensor is deemed functional, verify its calibration using the GeekOBD APP; recalibrate if necessary (10-15 minutes).
Step 5: Step 5: Conduct a road test to ensure that the steering response is normal and that no further codes appear (15-20 minutes)
Step 5: Conduct a road test to ensure that the steering response is normal and that no further codes appear (15-20 minutes).
Important Notes
- Always verify the repair with GeekOBD APP after completing diagnostic steps
- Clear codes and test drive to ensure the problem is resolved
- Address underlying causes to prevent code recurrence
Real Repair Case Studies
Case Study 1: Steering Angle Sensor Replacement in a 2016 Chevrolet Silverado
Vehicle: 2016 Chevrolet Silverado, 75,000 miles
Problem: Customer reported a persistent check engine light and erratic steering response.
Diagnosis: Diagnostic scan revealed C063E code. Visual inspection found damaged wiring leading to the steering angle sensor.
Solution: Replaced the damaged wiring and installed a new steering angle sensor, followed by calibration using GeekOBD.
Cost: $350 (Parts: $150 for the sensor, $200 for labor)
Result: Steering response returned to normal and the check engine light was cleared.
Case Study 2: Calibration of Steering Angle Sensor in a 2018 GMC Sierra
Vehicle: 2018 GMC Sierra, 50,000 miles
Problem: Customer experienced unusual steering feedback and a warning light on the dashboard.
Diagnosis: C063E was confirmed through the OBD2 scan. The sensor was functioning but required recalibration.
Solution: Recalibrated the steering angle sensor using the GeekOBD APP without any replacement.
Cost: $120 (Labor only)
Result: Warning light was cleared and steering performance was restored.