C0682 - Understanding the 2015-2018 Honda Civic's Steering Control Module Issue

Quick Answer

C0682 means: The C0682 code indicates a problem with the Steering Control Module in certain vehicles.

Fix: Check and replace faulty components Cost: $400 - $800 Time: 90-180 minutes

Can I drive with C0682? Immediate attention is recommended to avoid steering failure.

Common Questions

What does C0682 mean and how does it affect my car?

The C0682 code indicates a malfunction in the Steering Control Module, which plays a key role in providing power steering assistance. When this code appears, you may experience difficulty steering, especially at low speeds, and the vehicle may feel less stable. It's important to address this issue promptly to maintain safe driving conditions.

What are the most common causes of C0682 and how much does it cost to fix?

Common causes include a faulty steering control module, damaged wiring, or low power steering fluid. Repair costs can range from $150 for wiring repairs to $800 for module replacement, depending on the specific issue.

Can I drive my car with C0682 or should I stop immediately?

While you may still be able to drive your vehicle, it is not advisable to do so. The loss of power steering assist can make steering difficult, particularly in tight spaces or during sudden maneuvers, increasing the risk of an accident. It's best to have the issue diagnosed and repaired as soon as possible.

How can I diagnose C0682 myself using GeekOBD APP?

To diagnose C0682, connect the GeekOBD APP to your vehicle's OBD2 port and run a scan. Look for the C0682 code and any related codes. Review freeze frame data to understand the conditions under which the code was triggered. This information will help guide your repair process.

What vehicles are most commonly affected by C0682?

The C0682 code is commonly found in vehicles like the 2015-2018 Honda Civic, as well as some models from Acura and other manufacturers that utilize similar steering technology.

How can I prevent C0682 from happening again?

Regular maintenance of your vehicle's steering system is key. Check power steering fluid levels and inspect for leaks periodically. Additionally, ensure that electrical connections remain secure and free from corrosion to prevent future issues.

What is C0682?

The DTC C0682 code refers to a malfunction within the Steering Control Module, particularly affecting vehicles such as the 2015-2018 Honda Civic. This trouble code indicates that the module has detected an issue with one of its components or the communication with other modules in the vehicle's network. The Steering Control Module is crucial for providing power steering assistance, which enhances vehicle handling and driver comfort. When the C0682 code is triggered, you may experience a loss of power steering assist, making the steering feel heavier and more difficult to maneuver, especially at lower speeds. In addition, you may notice the steering wheel is off-center, or the steering feels loose. If ignored, this issue can lead to more significant problems, including the potential for a complete steering failure, which poses a significant safety risk. It is essential to address this code promptly to ensure safe driving conditions and to prevent further damage to the steering system or related components.

System: C - Chassis (ABS, Steering, Suspension)

Symptoms

Common symptoms when C0682 is present:

  • The check engine light illuminates, indicating a problem with the steering system.
  • You experience heavy steering effort, especially during parking maneuvers.
  • The steering wheel may feel unresponsive or loose, affecting your control while driving.
  • A noticeable decrease in fuel efficiency, potentially due to the increased effort needed to steer.
  • Unusual noises from the steering column or power steering pump, indicating possible mechanical issues.

Possible Causes

Most common causes of C0682 (ordered by frequency):

  1. The most common cause of the C0682 code is a faulty steering control module, which is responsible for monitoring and controlling power steering assist. This has a likelihood of about 60%.
  2. Another common issue could be damaged wiring or loose connections in the steering system, which can disrupt communication between the steering control module and other vehicle modules.
  3. A third cause might be low power steering fluid, which can result from leaks or system wear, leading to inadequate power assist. Regular checks and maintenance can help prevent this.
  4. Less commonly, the problem may stem from a malfunctioning power steering pump, which could fail to provide adequate hydraulic pressure.
  5. In rare cases, a software glitch in the vehicle's onboard computer could falsely trigger the C0682 code, requiring a reprogramming of the control module.

C0682 Repair Costs

Cost Breakdown by Repair Type

Replace Steering Control Module

Replacing the faulty steering control module with a new OEM part.

  • Total: $400 - $800
  • Success rate: 85%
Repair Wiring and Connections

Repairing damaged wiring or loose connections in the steering system.

  • Total: $150 - $300
  • Success rate: 75%
Money-Saving Tips for C0682
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional C0682 Diagnosis Process

Follow these systematic steps to accurately diagnose C0682. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Perform an initial visual inspection to check for damaged wiring, loose connections, or corrosion around the steering control module and its connectors (5-10 minutes)

Step 1: Perform an initial visual inspection to check for damaged wiring, loose connections, or corrosion around the steering control module and its connectors (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: Use the GeekOBD APP to perform an OBD2 scan and retrieve all diagnostic trouble codes and freeze frame data

Step 2: Use the GeekOBD APP to perform an OBD2 scan and retrieve all diagnostic trouble codes and freeze frame data. This will provide context for the C0682 code (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Conduct component testing using a multimeter or specific diagnostic tools to test the steering control module and related components for proper functionality (20-30 minutes)

Step 3: Conduct component testing using a multimeter or specific diagnostic tools to test the steering control module and related components for proper functionality (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: After repairs, perform a system function test to ensure that the steering system operates correctly and clear any stored codes (10-15 minutes)

Step 4: After repairs, perform a system function test to ensure that the steering system operates correctly and clear any stored codes (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Conduct a road test to verify that the steering assist is working under various conditions, ensuring the problem has been resolved (15-20 minutes)

Step 5: Conduct a road test to verify that the steering assist is working under various conditions, ensuring the problem has been resolved (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Steering Control Module Replacement in 2016 Honda Civic

Vehicle: 2016 Honda Civic, 45,000 miles

Problem: Customer reported heavy steering and illuminated check engine light.

Diagnosis: After scanning with GeekOBD APP, the C0682 code was retrieved. Visual inspection revealed corrosion in the wiring harness leading to the steering control module.

Solution: Replaced the steering control module and repaired the damaged wiring. After clearing the codes, the issue was resolved.

Cost: $600 (module $500, labor $100)

Result: Customer reported normal steering feel and no further issues.

Case Study 2: Wiring Repair for C0682 in 2017 Honda Civic

Vehicle: 2017 Honda Civic, 30,000 miles

Problem: Customer experienced intermittent steering assist loss.

Diagnosis: Running the GeekOBD APP showed the C0682 code. Inspection showed a loose connection at the steering control module.

Solution: Re-secured the connection and performed a system reset. No parts needed to be replaced.

Cost: $200 (labor only)

Result: Steering function restored, and customer reported no further problems.

Diagnose C0682

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: C0682
System: Chassis (ABS, Steering, Suspension)
Severity: HIGH
Category: Chassis Codes