C0724 - Understanding DTC C0724 - Common in 2015-2018 Ford F-150 and Other Models

Quick Answer

C0724 means: C0724 indicates a communication error in the ABS control module.

Fix: Check and replace faulty components Cost: $150 - $500 Time: 90-180 minutes

Can I drive with C0724? Address immediately to ensure safe braking performance.

Common Questions

What does C0724 mean and how does it affect my car?

C0724 indicates a communication issue within your vehicle's ABS system, which can severely impact braking performance. It is crucial to resolve this code to ensure your vehicle stops effectively, especially in emergency situations.

What are the most common causes of C0724 and how much does it cost to fix?

Common causes include damaged wiring (60% likelihood), faulty ABS control module (25%), and bad wheel speed sensors (10%). Repair costs can vary widely, ranging from $100 for sensor replacements to over $1,200 for a complete ABS module replacement.

Can I drive my car with C0724 or should I stop immediately?

It is not safe to drive your vehicle if C0724 is present, as it indicates potential ABS failure. You should stop the vehicle and have it diagnosed and repaired to ensure your safety on the road.

How can I diagnose C0724 myself using GeekOBD APP?

To diagnose C0724 using the GeekOBD APP, connect the app to your vehicle's OBD2 port, retrieve the trouble codes, and review the freeze frame data for additional context. Look for any other codes that might indicate related issues.

What vehicles are most commonly affected by C0724?

Models such as the 2015-2018 Ford F-150, Ford Explorer, and other Ford vehicles equipped with ABS are commonly affected by C0724. Be sure to check for any recalls or technical service bulletins related to your vehicle.

How can I prevent C0724 from happening again?

Regular maintenance, including checking electrical connections and cleaning corrosion from battery terminals, can help prevent C0724. It’s also wise to perform routine inspections of the ABS system to catch any issues early.

What is C0724?

The diagnostic trouble code (DTC) C0724 indicates a communication error within the vehicle's anti-lock braking system (ABS) control module. This code often appears in various Ford models, particularly the 2015-2018 Ford F-150, as well as other vehicles equipped with similar ABS technology. When C0724 is triggered, it signifies that the ABS control module is unable to communicate effectively with other systems in the vehicle, leading to potential safety concerns. This issue can arise from a variety of factors, including damaged wiring, corrosion at connectors, or a malfunctioning ABS module itself. If left unaddressed, the lack of proper communication can result in compromised braking performance, an illuminated ABS warning light, and, in severe cases, the complete failure of the anti-lock braking system. Therefore, understanding the implications of this trouble code is crucial for vehicle safety and reliability. Car owners experiencing this code should not only address the underlying issues promptly but also consider regular maintenance checks to prevent further complications that could arise from this fault.

System: C - Chassis (ABS, Steering, Suspension)

Symptoms

Common symptoms when C0724 is present:

Check engine light stays on constantly, indicating an ABS fault that requires immediate attention.
The ABS warning light may illuminate, which suggests that the anti-lock braking system is not functioning correctly.
Drivers may experience a soft or spongy brake pedal feel, which can indicate underlying issues with the ABS.
In some cases, the vehicle's traction control may become disabled, leading to reduced stability during slippery conditions.
The speedometer may provide inaccurate readings during operation, making it difficult to gauge the vehicle's speed.

Possible Causes

Most common causes of C0724 (ordered by frequency):

{'cause': 'Damaged wiring or loose connections (60%)', 'details': 'Corrosion or physical damage to wires can lead to poor communication between the ABS module and other vehicle systems.'}
{'cause': 'Faulty ABS control module (25%)', 'details': 'The ABS module itself may malfunction due to age or internal faults, preventing it from relaying information correctly.'}
{'cause': 'Faulty wheel speed sensors (10%)', 'details': "If one or more wheel speed sensors fail, they can disrupt the entire ABS system's operation, triggering the C0724 code."}
{'cause': 'Electrical issues (4%)', 'details': 'Poor electrical grounds or short circuits in the ABS circuit can lead to communication errors.'}
{'cause': 'Software glitches (1%)', 'details': 'Occasionally, outdated software in the ABS system may cause communication issues, though this is less common.'}

C0724 Repair Costs

Cost Breakdown by Repair Type

Wiring repair or replacement

Repairing or replacing damaged wiring and connectors.

Total: $150 - $500
Success rate: 80%

ABS control module replacement

Replacing a faulty ABS control module with a new or refurbished unit.

Total: $500 - $1,200
Success rate: 90%

Wheel speed sensor replacement

Replacing defective wheel speed sensors that inhibit ABS functionality.

Total: $100 - $300 per sensor
Success rate: 85%

Money-Saving Tips for C0724

Start with the most common and least expensive repairs first
Use GeekOBD APP to confirm diagnosis before replacing expensive parts
Consider preventive maintenance to avoid future occurrences
Compare prices for OEM vs aftermarket parts based on your needs
Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional C0724 Diagnosis Process

Follow these systematic steps to accurately diagnose C0724. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes).