C0750 - Understanding the Steering Angle Sensor Problem in Many GM Vehicles

Quick Answer

C0750 means: C0750 indicates a malfunction in the steering angle sensor, affecting stability control.

Fix: Check and replace faulty components Cost: $150 - $400 Time: 90-180 minutes

Can I drive with C0750? Immediate attention is recommended to avoid safety risks.

Common Questions

What does C0750 mean and how does it affect my car?

C0750 indicates a problem with the steering angle sensor, which is crucial for your vehicle's stability control system. If this sensor fails, it can lead to compromised handling and increased risk of skidding, especially in adverse weather conditions. Immediate attention is essential to maintain safety.

What are the most common causes of C0750 and how much does it cost to fix?

The most common cause of C0750 is a faulty steering angle sensor, which typically requires replacement costing between $150 and $400. Other issues could include damaged wiring or improper calibration, which may also need addressing at a similar cost.

Can I drive my car with C0750 or should I stop immediately?

While you may still drive your vehicle with C0750, it's advisable to refrain from doing so until the issue is resolved. Driving with a malfunctioning steering angle sensor can compromise your vehicle's handling, making it unsafe, especially in slippery conditions.

How can I diagnose C0750 myself using GeekOBD APP?

You can use the GeekOBD APP to scan your vehicle for DTCs, including C0750. Look for freeze frame data, which will provide context on the conditions under which the code was triggered. This information is crucial for identifying the root cause.

What vehicles are most commonly affected by C0750?

The C0750 code is frequently found in various General Motors vehicles, particularly from 2007-2019 models like the Chevrolet Silverado and GMC Sierra. Always check for any recalls or Technical Service Bulletins that might pertain to your specific model.

How can I prevent C0750 from happening again?

Regular maintenance can help prevent C0750 from reoccurring. Ensure that you have your vehicle's electrical systems checked periodically, keep an eye on the steering components for wear, and be mindful of any dashboard warning lights.

What is C0750?

The Diagnostic Trouble Code (DTC) C0750 pertains to issues with the steering angle sensor within the vehicle's stability control system. This code is commonly found in various vehicles from General Motors, including popular models like the Chevrolet Silverado (2007-2019) and the GMC Sierra. The steering angle sensor is crucial for monitoring the position of the steering wheel, providing input to the vehicle's electronic stability control (ESC) system. When the sensor fails or provides inaccurate readings, the ESC may not function correctly, leading to reduced vehicle handling and stability. This can be particularly concerning in slippery conditions, as it affects the vehicle's ability to maintain traction. If you encounter this code, you may notice your check engine light illuminated, or the stability control warning light may be activated. Ignoring this code can lead to further complications, including potential failure of the vehicle's stability features, which are designed to help prevent skidding or loss of control during critical driving conditions. Addressing the C0750 code promptly is essential for maintaining vehicle safety and performance.

System: C - Chassis (ABS, Steering, Suspension)

Symptoms

Common symptoms when C0750 is present:

  • The check engine light stays on constantly, indicating an issue with the vehicle's electronic systems.
  • You may experience a loss of traction control, especially on wet or slippery roads, leading to unpredictable handling.
  • The stability control light activates intermittently, signaling that the system is not functioning correctly.
  • Steering responsiveness may feel off, with potential difficulty in turning or maintaining a straight path.
  • There may be a noticeable increase in wear on tires due to inconsistent steering input.

Possible Causes

Most common causes of C0750 (ordered by frequency):

  1. The most common cause is a faulty steering angle sensor, which accounts for around 70% of cases. This can occur due to wear and tear or electrical issues.
  2. Another cause could be damaged wiring or connectors leading to the sensor, often due to corrosion or physical damage.
  3. Improper calibration after replacing the steering angle sensor can also trigger the C0750 code; ensuring correct installation is crucial.
  4. A less common but serious cause could be a malfunctioning electronic control unit (ECU), which may require professional diagnostics.
  5. Rarely, issues with the vehicle's braking system can also lead to the C0750 code, particularly if the ABS system is involved.

C0750 Repair Costs

Cost Breakdown by Repair Type

Steering Angle Sensor Replacement

Replacing the faulty steering angle sensor can restore proper function.

  • Total: $150 - $400
  • Success rate: 85%
Wiring Repair

Repairing damaged wiring or connectors to ensure proper signal transmission.

  • Total: $100 - $300
  • Success rate: 90%
Money-Saving Tips for C0750
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional C0750 Diagnosis Process

Follow these systematic steps to accurately diagnose C0750. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs such as damaged wiring, loose connections, or corrosion around the steering column and sensor area (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs such as damaged wiring, loose connections, or corrosion around the steering column and sensor area (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Use the GeekOBD APP to retrieve all trouble codes and freeze frame data to gain context on the fault (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Use the GeekOBD APP to retrieve all trouble codes and freeze frame data to gain context on the fault (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Test the steering angle sensor with a multimeter to check for proper voltage and resistance values (20-30 minutes)

Step 3: Component testing - Test the steering angle sensor with a multimeter to check for proper voltage and resistance values (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - After any repairs, verify the sensor's operation and clear the codes to see if they return (10-15 minutes)

Step 4: System function test - After any repairs, verify the sensor's operation and clear the codes to see if they return (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to ensure that the steering and stability systems function correctly (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to ensure that the steering and stability systems function correctly (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Steering Angle Sensor Replacement in 2015 Chevrolet Silverado

Vehicle: 2015 Chevrolet Silverado 1500, 75,000 miles

Problem: Customer reported intermittent stability control warning light and poor steering response.

Diagnosis: Used the GeekOBD APP to retrieve C0750 code. A visual inspection revealed corrosion on the steering angle sensor connectors.

Solution: Replaced the steering angle sensor and cleaned the connectors.

Cost: $325 (sensor: $250, labor: $75)

Result: Post-repair road test confirmed proper functionality; no warning lights returned.

Case Study 2: Wiring Repair on 2017 GMC Sierra

Vehicle: 2017 GMC Sierra 1500, 50,000 miles

Problem: Check engine light was on with a C0750 code, and steering felt loose.

Diagnosis: Visual inspection found damaged wiring near the sensor due to wear. The GeekOBD APP confirmed the C0750 code.

Solution: Repaired damaged wiring and ensured proper connections.

Cost: $200 (repair materials and labor)

Result: Successfully resolved the issue, and the customer reported improved steering response.

Diagnose C0750

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: C0750
System: Chassis (ABS, Steering, Suspension)
Severity: HIGH
Category: Chassis Codes