C092B - Understanding the Code and Repair Options for Common GM Vehicles

Quick Answer

C092B means: C092B indicates an issue with the electronic brake control module, affecting braking performance.

Fix: Check and replace faulty components Cost: $150 - $500 Time: 90-180 minutes

Can I drive with C092B? Immediate attention is recommended to prevent safety hazards.

Common Questions

What does C092B mean and how does it affect my car?

C092B indicates a problem with your vehicle's electronic brake control module. This can lead to decreased braking effectiveness, which is a critical safety concern. If ignored, it may escalate to brake failure, putting you and others at risk.

What are the most common causes of C092B and how much does it cost to fix?

The most common causes include a faulty brake pressure sensor (about 60% of cases) and issues with the EBCM. Repair costs range from $150 for sensor replacement to $1,500 for EBCM repairs, depending on the severity of the issue.

Can I drive my car with C092B or should I stop immediately?

Driving with a C092B code is not advisable due to potential safety risks. It’s best to stop driving and have the vehicle checked to prevent brake failure.

How can I diagnose C092B myself using GeekOBD APP?

You can use the GeekOBD APP to scan for diagnostic trouble codes, view live data, and analyze freeze frame information that shows the vehicle’s condition when the code was triggered.

What vehicles are most commonly affected by C092B?

Commonly affected vehicles include 2014-2018 Chevrolet Silverado and GMC Sierra models. Always check for any recalls or Technical Service Bulletins (TSBs) related to the brake system.

How can I prevent C092B from happening again?

Regular brake system inspections, timely replacement of worn components, and keeping up with software updates for the vehicle can help prevent the recurrence of C092B.

What is C092B?

The diagnostic trouble code (DTC) C092B typically indicates an issue with the brake system, specifically relating to the electronic brake control module (EBCM) in many General Motors vehicles, including models like the Chevrolet Silverado (2014-2018) and GMC Sierra (2014-2018). This code can lead to various issues such as impaired braking performance, as it often signals a problem with the brake pressure sensor or the EBCM itself. When this code is triggered, it may result in the malfunction of electronic stability control (ESC) and anti-lock braking systems (ABS), which are crucial for maintaining vehicle control in slippery or emergency conditions. From a practical standpoint, if you encounter this code, it’s essential to understand that it can lead to reduced braking effectiveness, potentially compromising your safety on the road. Ignoring this code may escalate into more severe issues, including complete brake failure, which makes it imperative to diagnose and address the problem promptly. Additionally, the cost of repairs can vary widely depending on the underlying cause, ranging from simple sensor replacements to more extensive EBCM repairs or replacements, averaging between $150 to $1,500.

System: C - Chassis (ABS, Steering, Suspension)

Symptoms

Common symptoms when C092B is present:

  • The check engine light is illuminated, indicating a malfunction within the brake system.
  • You may notice a decrease in braking performance, such as longer stopping distances or unresponsive brakes.
  • The ABS warning light may engage, suggesting the anti-lock brake system is compromised and could lead to wheel locking during hard braking.
  • A noticeable increase in brake pedal travel can occur, making it feel like the brakes are not engaging as they should.
  • You may experience unusual noises, such as grinding or clicking, when applying the brakes, indicating potential mechanical issues.

Possible Causes

Most common causes of C092B (ordered by frequency):

  1. The most common cause is a faulty brake pressure sensor, occurring in about 60% of cases. This sensor monitors brake fluid pressure and can misread, leading to erroneous signals.
  2. Another frequent culprit is a malfunctioning electronic brake control module (EBCM), which can disrupt normal brake operations and is a technical concern requiring advanced diagnostics.
  3. Worn brake components, such as pads or rotors, can also trigger the C092B code, especially if they are affecting the brake pressure readings. Regular inspections can help prevent this.
  4. Less commonly, issues with wiring or connectors related to the brake system can lead to this code, often due to corrosion or physical damage.
  5. A rare but possible cause includes software issues within the vehicle’s control systems, which may require a software update or reprogramming to resolve.

C092B Repair Costs

Cost Breakdown by Repair Type

Brake Pressure Sensor Replacement

Replacing the faulty brake pressure sensor to restore accurate readings to the EBCM.

  • Total: $150 - $500
  • Success rate: 80%
EBCM Repair or Replacement

Repairing or replacing the electronic brake control module if found defective.

  • Total: $500 - $1,500
  • Success rate: 90%
Money-Saving Tips for C092B
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional C092B Diagnosis Process

Follow these systematic steps to accurately diagnose C092B. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes). Look for any signs of wear around the brake components.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Use the app to retrieve all codes and freeze frame data to understand the fault context (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Use the app to retrieve all codes and freeze frame data to understand the fault context (10-15 minutes). This data can help pinpoint when the issue occurred.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter or specific diagnostic tools to test the brake pressure sensor and EBCM (20-30 minutes)

Step 3: Component testing - Use a multimeter or specific diagnostic tools to test the brake pressure sensor and EBCM (20-30 minutes). Make sure to follow manufacturer specifications for testing.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - After making any repairs, verify proper operation and clear codes using the GeekOBD APP (10-15 minutes)

Step 4: System function test - After making any repairs, verify proper operation and clear codes using the GeekOBD APP (10-15 minutes). This ensures the issue has been resolved.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success and check for any return of warning lights (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success and check for any return of warning lights (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Resolving C092B in a 2017 Chevy Silverado

Vehicle: 2017 Chevrolet Silverado, 45,000 miles

Problem: Customer reported the check engine light and brake warning lights illuminated, along with decreased braking performance.

Diagnosis: Diagnostic scanning revealed the C092B code. Further testing showed a faulty brake pressure sensor.

Solution: Replaced the brake pressure sensor, performed system tests, and cleared the codes.

Cost: $220 (parts: $100, labor: $120)

Result: Customer reported improved braking performance and no warning lights after repair.

Case Study 2: EBCM Replacement for C092B in a 2015 GMC Sierra

Vehicle: 2015 GMC Sierra, 70,000 miles

Problem: Customer experienced intermittent ABS activation and C092B code appeared during inspection.

Diagnosis: Diagnostics indicated a malfunctioning EBCM that was not communicating correctly with the brake pressure sensor.

Solution: Replaced the EBCM and reprogrammed it to the vehicle’s systems.

Cost: $1,200 (parts: $900, labor: $300)

Result: Post-repair, the vehicle’s braking system functioned normally with no further issues.

Diagnose C092B

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: C092B
System: Chassis (ABS, Steering, Suspension)
Severity: HIGH
Category: Chassis Codes