C0930 - Understanding DTC C0930: Common Causes and Solutions for 2015-2018 Chevrolet Silverado

Quick Answer

C0930 means: DTC C0930 indicates a communication issue within the electronic stability control system, particularly affecting the controller area network.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with C0930? Immediate attention is recommended to ensure vehicle safety and proper functionality.

Common Questions

What does C0930 mean and how does it affect my car?

DTC C0930 indicates a communication problem within the electronic stability control system. This can lead to issues like decreased stability during driving, particularly in adverse conditions, and could compromise your vehicle's safety. Ignoring this code may result in more severe issues down the road.

What are the most common causes of C0930 and how much does it cost to fix?

Common causes include damaged wiring (60% likelihood), faulty ESC modules, and battery issues. Repair costs range from $150 for wiring repairs to $1,200 for ESC module replacements, depending on the severity of the issue.

Can I drive my car with C0930 or should I stop immediately?

It's advised to address C0930 promptly. While you might be able to drive short distances, doing so could be risky due to potential instability. Ignoring this code may lead to further damage and increased repair costs.

How can I diagnose C0930 myself using GeekOBD APP?

Using the GeekOBD APP, you can scan your vehicle for diagnostic trouble codes, view freeze frame data, and check real-time data from the ESC system. Look for any abnormal readings or codes related to the ESC module to guide your next steps.

What vehicles are most commonly affected by C0930?

DTC C0930 is frequently seen in 2015-2018 Chevrolet Silverado models, but may also appear in other GM vehicles from the same era. Always check for any recalls or Technical Service Bulletins (TSBs) related to your specific model.

How can I prevent C0930 from happening again?

Regular vehicle maintenance, including inspecting wiring and connections, can help prevent C0930. Additionally, ensuring your battery is in good health and using quality replacement parts can also reduce the likelihood of recurrence.

What is C0930?

DTC C0930 is a diagnostic trouble code that indicates an issue with the controller area network (CAN) communication within the vehicle's electronic stability control (ESC) system. This code typically emerges in models such as the 2015 to 2018 Chevrolet Silverado, where the vehicle’s onboard computer detects a malfunction in the communication between the ESC module and other critical systems. This disruption can manifest due to damaged wiring, faulty connectors, or even issues within the ESC module itself. When this code is triggered, it may lead to a range of driving issues, including diminished stability control, which can affect safety during maneuvers such as sharp turns or sudden stops. Drivers might notice the traction control light activating or experience an unresponsive ESC system. Ignoring this code can lead to more severe issues, including complete failure of the stability control system, which could compromise vehicle safety. Therefore, addressing DTC C0930 promptly is crucial for maintaining vehicle performance and safety.

System: C - Chassis (ABS, Steering, Suspension)

Symptoms

Common symptoms when C0930 is present:

  • The check engine light or traction control light remains illuminated, indicating a fault in the ESC system.
  • Drivers may experience the vehicle losing stability during acceleration or cornering, leading to potential safety risks.
  • Fuel economy may decrease by approximately 10-15%, as the vehicle compensates for a malfunctioning stability system.
  • Unresponsive traction control system, where engaging the system does not yield expected results.
  • Inconsistent performance of the ABS system, with possible delays or failures in braking response.

Possible Causes

Most common causes of C0930 (ordered by frequency):

  1. The most common cause of DTC C0930 is damaged wiring or connectors in the CAN system, with about 60% of cases attributed to this issue. Environmental factors like moisture or corrosion can exacerbate this problem.
  2. Another frequent cause is a malfunctioning ESC module itself, which may fail due to internal faults or software glitches. Technical diagnostics are necessary to isolate this problem.
  3. Poor battery health or voltage issues can lead to system communication failures, so regular battery maintenance is advisable to prevent this scenario.
  4. Less commonly, issues with the vehicle’s main computer (ECM) can cause communication disruptions, leading to this code appearing.
  5. Rarely, external factors such as aftermarket modifications or incompatible electronic components can induce faults in the communication network.

C0930 Repair Costs

Cost Breakdown by Repair Type

Wiring Repair

Repairing or replacing damaged wiring and connectors.

  • Total: $150 - $300
  • Success rate: 90%
ESC Module Replacement

Replacing a faulty electronic stability control module.

  • Total: $600 - $1,200
  • Success rate: 85%
Money-Saving Tips for C0930
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional C0930 Diagnosis Process

Follow these systematic steps to accurately diagnose C0930. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Conduct an initial visual inspection of the wiring and connectors in the ESC system for any obvious damage (5-10 minutes)

Step 1: Conduct an initial visual inspection of the wiring and connectors in the ESC system for any obvious damage (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: Use the GeekOBD APP to perform an OBD2 scan, retrieving all codes and freeze frame data to gather context on the fault (10-15 minutes)

Step 2: Use the GeekOBD APP to perform an OBD2 scan, retrieving all codes and freeze frame data to gather context on the fault (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Test the suspected components using a multimeter, focusing on the ESC module and CAN wiring for continuity and voltage (20-30 minutes)

Step 3: Test the suspected components using a multimeter, focusing on the ESC module and CAN wiring for continuity and voltage (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: After repairs, perform a system function test to ensure proper operation and clear the codes using the GeekOBD APP (10-15 minutes)

Step 4: After repairs, perform a system function test to ensure proper operation and clear the codes using the GeekOBD APP (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Finally, conduct a road test to verify that the issue has been resolved and the vehicle operates normally under various conditions (15-20 minutes)

Step 5: Finally, conduct a road test to verify that the issue has been resolved and the vehicle operates normally under various conditions (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Repairing C0930 in a 2016 Chevrolet Silverado

Vehicle: 2016 Chevrolet Silverado, 45,000 miles

Problem: Customer reported a persistent traction control light and difficulty maintaining vehicle stability.

Diagnosis: Diagnostic scanning revealed DTC C0930. A visual inspection identified corroded wiring in the ESC system.

Solution: Replaced the damaged wiring and connectors, then cleared the codes using the GeekOBD APP.

Cost: $250 (parts and labor included)

Result: After the repair, the traction control light was off, and the vehicle stability returned to normal.

Case Study 2: Resolving C0930 in a 2017 GMC Sierra

Vehicle: 2017 GMC Sierra, 50,000 miles

Problem: The owner experienced sporadic ABS activation and stability issues.

Diagnosis: The GeekOBD APP detected DTC C0930. Further tests showed a malfunctioning ESC module.

Solution: The ESC module was replaced, and the system was recalibrated.

Cost: $900 (including part and labor)

Result: Post-repair, the vehicle performed well with no further stability issues.

Diagnose C0930

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: C0930
System: Chassis (ABS, Steering, Suspension)
Severity: HIGH
Category: Chassis Codes