C0B19 - Understanding the Diagnostic Trouble Code for 2015-2018 Honda Accord and Other Models

Quick Answer

C0B19 means: C0B19 indicates a malfunction in the vehicle's advanced driver-assistance systems, often linked to radar or camera failures.

Fix: Check and replace faulty components Cost: $300 - $700 Time: 90-180 minutes

Can I drive with C0B19? It's crucial to address this issue immediately to ensure safety features are operational.

Common Questions

What does C0B19 mean and how does it affect my car?

The C0B19 code indicates a malfunction in your car's advanced driver-assistance systems (ADAS), which can impact safety features like adaptive cruise control. If this code appears, it's crucial to address it immediately as it may compromise your vehicle's ability to prevent accidents.

What are the most common causes of C0B19 and how much does it cost to fix?

Common causes of C0B19 include faulty radar sensors and camera systems. Repair costs can range from $150 for wiring repairs to $700 for radar sensor replacements. It's important to diagnose the issue accurately to avoid unnecessary expenses.

Can I drive my car with C0B19 or should I stop immediately?

While you may still be able to drive your car, doing so with the C0B19 code active is risky as it indicates a failure in important safety features. It's best to have your vehicle inspected as soon as possible to ensure your safety.

How can I diagnose C0B19 myself using GeekOBD APP?

To diagnose C0B19 using the GeekOBD APP, connect the device to your vehicle's OBD2 port and run a comprehensive scan. The app will retrieve codes and provide freeze frame data, helping you understand the context and possible causes of the fault.

What vehicles are most commonly affected by C0B19?

The C0B19 code is commonly found in 2015-2018 Honda Accord models and other vehicles equipped with advanced driver-assistance systems. Always check for any recalls or technical service bulletins (TSBs) related to your specific model.

How can I prevent C0B19 from happening again?

Regularly check and clean your vehicle's radar and camera sensors, especially in winter months or when driving in inclement weather. Periodic inspections of wiring and connections can also help prevent future issues.

What is C0B19?

The C0B19 diagnostic trouble code (DTC) indicates a malfunction related to the vehicle's advanced driver-assistance systems (ADAS), specifically pointing towards issues with the vehicle's radar or camera systems that assist in functions like adaptive cruise control and collision avoidance. This code typically arises in vehicles equipped with technologies such as lane-keeping assist and automatic emergency braking. When the C0B19 code is triggered, it suggests that the vehicle's onboard computer has detected a fault in the communication or performance of these ADAS components. Drivers may experience symptoms such as warning lights on the dashboard, and in some cases, the vehicle may disable certain safety features to prevent unsafe operation. It's essential to address this issue promptly, as it can compromise the vehicle's safety systems. Ignoring the C0B19 code can lead to increased risk of accidents, especially in situations where these advanced features are necessary for safe driving. Therefore, understanding and diagnosing this code becomes critical for maintaining vehicle safety and performance.

System: C - Chassis (ABS, Steering, Suspension)

Symptoms

Common symptoms when C0B19 is present:

  • The check engine light or ADAS warning light remains illuminated on the dashboard, indicating a fault in the safety systems.
  • The adaptive cruise control feature may fail to engage or disengage properly, leading to erratic vehicle speed control during driving.
  • The lane-keeping assist system might become unresponsive, causing the vehicle to drift without correction, which could result in unsafe driving conditions.
  • Increased difficulty in parking or maneuvering, as the vehicle's sensors may not function correctly, leading to a lack of proximity alerts.
  • You may notice a decrease in overall fuel efficiency, as the vehicle's systems may work harder due to improper sensor readings.

Possible Causes

Most common causes of C0B19 (ordered by frequency):

  1. The most common cause of the C0B19 code is a malfunctioning radar sensor, which can occur due to misalignment or physical damage, with a likelihood of around 50%.
  2. A second possible cause is a faulty camera system, which is integral for many ADAS functions; issues can arise from dirt or obstructions on the lens.
  3. Wiring issues, such as damaged insulation or loose connections, can also trigger this code. Regular inspections can help prevent this issue.
  4. Less common but serious causes involve software glitches within the vehicle's control modules, which may require software updates or reprogramming.
  5. A rare but possible cause is a complete failure of the ADAS module itself, which may necessitate replacement and can be quite costly.

C0B19 Repair Costs

Cost Breakdown by Repair Type

Radar Sensor Replacement

Replacing the malfunctioning radar sensor, which is often the cause of the C0B19 code.

  • Total: $300 - $700
  • Success rate: 85%
Camera System Repair

Cleaning or replacing the front camera system if it is obstructed or damaged.

  • Total: $250 - $600
  • Success rate: 80%
Wiring Repair

Repairing damaged wiring or connections in the ADAS system.

  • Total: $150 - $300
  • Success rate: 70%
Money-Saving Tips for C0B19
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional C0B19 Diagnosis Process

Follow these systematic steps to accurately diagnose C0B19. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Conduct an initial visual inspection to check for damaged wiring, loose connections, or corrosion in the ADAS components (5-10 minutes)

Step 1: Conduct an initial visual inspection to check for damaged wiring, loose connections, or corrosion in the ADAS components (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: Use the GeekOBD APP to perform an OBD2 scan, retrieving all codes and freeze frame data to establish the fault context (10-15 minutes)

Step 2: Use the GeekOBD APP to perform an OBD2 scan, retrieving all codes and freeze frame data to establish the fault context (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Test the radar and camera components with a multimeter and diagnostic tools to confirm their functionality (20-30 minutes)

Step 3: Test the radar and camera components with a multimeter and diagnostic tools to confirm their functionality (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: Perform a system function test to verify that all components operate correctly after any repairs and clear the codes (10-15 minutes)

Step 4: Perform a system function test to verify that all components operate correctly after any repairs and clear the codes (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Conduct a road test to ensure that the vehicle operates normally under various conditions and confirm repair success (15-20 minutes)

Step 5: Conduct a road test to ensure that the vehicle operates normally under various conditions and confirm repair success (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Radar Sensor Replacement in 2016 Honda Accord

Vehicle: 2016 Honda Accord, 65,000 miles

Problem: Customer reported the adaptive cruise control was not functioning, and the C0B19 code appeared.

Diagnosis: A thorough diagnostic showed that the radar sensor was misaligned due to a recent front-end collision.

Solution: Replaced the radar sensor and re-aligned it correctly.

Cost: $500 (parts: $300, labor: $200)

Result: After repair, the adaptive cruise control functioned correctly, and the C0B19 code was cleared.

Case Study 2: Camera System Repair for 2017 Honda CR-V

Vehicle: 2017 Honda CR-V, 45,000 miles

Problem: Driver experienced issues with lane-keeping assist; the dashboard indicated a C0B19 code.

Diagnosis: Inspection revealed that the front camera was obstructed by dirt and debris.

Solution: Cleaned the camera lens and performed a system reset.

Cost: $150 (cleaning and labor included)

Result: The lane-keeping assist resumed normal operation, and the warning light disappeared.

Diagnose C0B19

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: C0B19
System: Chassis (ABS, Steering, Suspension)
Severity: HIGH
Category: Chassis Codes