C0C0E - Understanding the Steering Angle Sensor Code in 2015-2020 Ford F-150 and Other Models

Quick Answer

C0C0E means: C0C0E indicates a problem with the steering angle sensor.

Fix: Check and replace faulty components Cost: $200 - $500 Time: 90-180 minutes

Can I drive with C0C0E? Immediate attention is recommended as it impacts vehicle safety.

Common Questions

What does C0C0E mean and how does it affect my car?

C0C0E indicates a malfunctioning steering angle sensor, which is vital for vehicle stability and control. If this sensor fails, your vehicle may not respond properly to steering inputs, potentially leading to unsafe driving conditions. Immediate diagnostics and repairs are crucial to ensure your vehicle operates safely.

What are the most common causes of C0C0E and how much does it cost to fix?

Common causes include a faulty steering angle sensor, damaged wiring, or improper calibration. Repair costs can range from $200 to $500 for sensor replacement and an additional $50 to $100 for recalibration, depending on the severity of the issue.

Can I drive my car with C0C0E or should I stop immediately?

It's advisable to stop driving your vehicle as soon as you notice the C0C0E code. The malfunctioning steering angle sensor can severely affect your vehicle's handling and safety, increasing the risk of accidents.

How can I diagnose C0C0E myself using GeekOBD APP?

With the GeekOBD APP, you can easily scan your vehicle's OBD2 system to identify the C0C0E code. Follow up with a visual inspection of the steering angle sensor and its wiring. Use the app to monitor live data from the sensor to check if it's reporting accurate values.

What vehicles are most commonly affected by C0C0E?

This code is frequently seen in 2015-2020 Ford F-150 models, but it can also affect other makes like Chevrolet Silverado and RAM trucks, especially those equipped with advanced driver-assistance systems. Keeping an eye on recalls or service bulletins related to the steering system can also be beneficial.

How can I prevent C0C0E from happening again?

Regular maintenance, including periodic checks of the steering system and ensuring proper calibration after any repair work, can help prevent the recurrence of the C0C0E code. Additionally, keeping the wiring and connectors clean and free from corrosion will also extend the life of your steering angle sensor.

What is C0C0E?

The diagnostic trouble code C0C0E refers to a malfunction related to the steering angle sensor, particularly in vehicles like the 2015-2020 Ford F-150. This sensor plays a crucial role in the vehicle's stability control and anti-lock braking systems. When the C0C0E code is triggered, it indicates that the steering angle sensor is either malfunctioning, out of range, or has lost communication with the vehicle's engine control unit (ECU). In simpler terms, your vehicle may struggle to maintain its intended path, leading to issues in steering responsiveness and safety. Drivers may experience unexpected steering behavior, which can be alarming. If left unaddressed, the problem may escalate, potentially leading to more severe steering or braking issues, making it essential for car owners to diagnose and rectify this code promptly. Repairing the steering angle sensor could involve recalibrating the sensor, replacing it, or fixing any wiring issues, depending on the root cause of the malfunction.

System: C - Chassis (ABS, Steering, Suspension)

Symptoms

Common symptoms when C0C0E is present:

  • The check engine light illuminates and remains on, signaling the need for a diagnostic check.
  • Drivers may notice that the vehicle's steering feels unresponsive or erratic during turns, impacting overall control.
  • Fuel economy may decrease significantly, potentially between 10-15%, as the vehicle struggles to optimize performance due to sensor issues.
  • The stability control light may also turn on, indicating that the vehicle's traction management is compromised.
  • Unusual noises from the steering column might be experienced, suggesting mechanical interference with the sensor.

Possible Causes

Most common causes of C0C0E (ordered by frequency):

  1. The most common cause of C0C0E is a faulty steering angle sensor, with a likelihood of about 60%. These sensors can wear out over time due to regular use or exposure to environmental factors.
  2. Another potential cause is a wiring issue, such as damaged or corroded connectors, which can interfere with signal transmission between the sensor and ECU. This accounts for roughly 25% of cases.
  3. Improper calibration after a steering component replacement is also a frequent issue. Ensuring the sensor is correctly calibrated during installation can prevent future problems.
  4. Less commonly, a malfunctioning ECU might be responsible, which can lead to inconsistent sensor readings, but this is relatively rare.
  5. In some cases, software glitches in the vehicle’s onboard systems may trigger the C0C0E code, leading to incorrect sensor values being reported.

C0C0E Repair Costs

Cost Breakdown by Repair Type

Steering Angle Sensor Replacement

Replacing the faulty steering angle sensor with a new OEM part.

  • Total: $200 - $500
  • Success rate: 85%
Sensor Calibration

Re-calibrating the steering angle sensor after installation or repair.

  • Total: $50 - $100
  • Success rate: 90%
Wiring Repair

Repairing or replacing damaged wiring or connectors.

  • Total: $100 - $300
  • Success rate: 75%
Money-Saving Tips for C0C0E
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional C0C0E Diagnosis Process

Follow these systematic steps to accurately diagnose C0C0E. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Begin with an initial visual inspection of the wiring harness connected to the steering angle sensor

Step 1: Begin with an initial visual inspection of the wiring harness connected to the steering angle sensor. Look for any signs of damage, fraying, or corrosion (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: Use the GeekOBD APP to perform an OBD2 scan to retrieve all active codes and freeze frame data

Step 2: Use the GeekOBD APP to perform an OBD2 scan to retrieve all active codes and freeze frame data. This provides context for the fault and helps identify if other codes are present (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Conduct component testing using a multimeter to measure the resistance and output voltage of the steering angle sensor

Step 3: Conduct component testing using a multimeter to measure the resistance and output voltage of the steering angle sensor. Confirm it meets manufacturer specifications (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: Verify proper system operation after making repairs or adjustments

Step 4: Verify proper system operation after making repairs or adjustments. Clear the codes and check if the C0C0E reoccurs (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Perform a road test under various driving conditions to ensure the steering system is functioning correctly and observe if any warning lights reappear (15-20 minutes)

Step 5: Perform a road test under various driving conditions to ensure the steering system is functioning correctly and observe if any warning lights reappear (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Ford F-150 Steering Angle Sensor Replacement

Vehicle: 2018 Ford F-150, 75,000 miles

Problem: Customer reported the steering wheel felt loose and the stability control light was on.

Diagnosis: After scanning with the GeekOBD APP, the C0C0E code was found. A visual inspection revealed a faulty sensor.

Solution: Replaced the steering angle sensor and recalibrated it using the GeekOBD APP.

Cost: $450 (Sensor: $350, Calibration: $100)

Result: Customer reported improved steering response and no warning lights after the repair.

Case Study 2: Chevrolet Silverado Wiring Issue

Vehicle: 2017 Chevrolet Silverado 1500, 60,000 miles

Problem: The check engine light was on, and the driver noticed erratic steering behavior.

Diagnosis: The GeekOBD APP revealed the C0C0E code, and further inspection found a damaged wiring harness.

Solution: Repaired the wiring harness and recalibrated the steering angle sensor.

Cost: $250 (Wiring repair: $150, Calibration: $100)

Result: The vehicle's steering returned to normal, and the check engine light was resolved.

Diagnose C0C0E

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: C0C0E
System: Chassis (ABS, Steering, Suspension)
Severity: HIGH
Category: Chassis Codes