Quick Answer
C0C60 means: The C0C60 code refers to a communication issue between the PCM and other vehicle modules, often found in newer Ford vehicles.
Can I drive with C0C60? It is advisable to address this issue immediately to prevent further electrical system failures.
Common Questions
What does C0C60 mean and how does it affect my car?
The C0C60 code indicates a communication issue within your vehicle's electronic systems, particularly between the PCM and other modules. This can lead to performance issues such as stalling or erratic electronic behavior, making it critical to address this code promptly.
What are the most common causes of C0C60 and how much does it cost to fix?
Common causes include a faulty PCM, damaged wiring, or moisture in connectors. Repair costs can range from $150 for wiring repairs to $1200 for PCM replacement, depending on the specific issue.
Can I drive my car with C0C60 or should I stop immediately?
It's advised to stop driving your vehicle if the C0C60 code appears, as it can lead to further electronic failures and safety hazards.
How can I diagnose C0C60 myself using GeekOBD APP?
Using the GeekOBD APP, you can scan for DTCs, view freeze frame data, and monitor real-time data to identify communication issues, making it easier to pinpoint the problem.
What vehicles are most commonly affected by C0C60?
This code is frequently seen in 2015-2020 Ford F-150 and Super Duty trucks, with known issues reported among these models.
How can I prevent C0C60 from happening again?
Regular vehicle maintenance, including wiring inspections and ensuring that aftermarket accessories are properly installed, can help prevent the recurrence of the C0C60 code.
What is C0C60?
The C0C60 diagnostic trouble code (DTC) indicates an issue with the Vehicle Communication Bus, specifically related to the powertrain control module (PCM). This code is often found in various Ford models, particularly 2015 to 2020 Ford Super Duty trucks and Ford F-150s. When your vehicle's onboard diagnostic system detects a problem with the communication between the PCM and other modules, it triggers this code. This can lead to a range of issues, including poor engine performance, erratic behavior of electronic systems, or even stalling. Understanding and addressing the C0C60 code is crucial because it can significantly affect your vehicle's reliability and safety. Ignoring this code may lead to more serious complications down the line, such as worsening communication failures or additional DTCs appearing. Regularly checking for DTCs using an OBD2 scanner or the GeekOBD APP can help catch issues early, ensuring that your vehicle runs smoothly and efficiently. If you’re experiencing this code, it’s important to act promptly to diagnose and resolve the underlying issue.
System: C - Chassis (ABS, Steering, Suspension)
Symptoms
Common symptoms when C0C60 is present:
- Check engine light is illuminated, indicating a communication failure.
- Engine performance issues such as stalling or hesitation during acceleration.
- Erratic functionality of electronic features, including power windows and dashboard indicators.
- Decreased fuel efficiency, potentially by 10-15% due to poor engine management.
- Inability to communicate with diagnostic tools, complicating troubleshooting efforts.
Possible Causes
Most common causes of C0C60 (ordered by frequency):
- The most common cause of the C0C60 code is a faulty PCM, which occurs in approximately 60% of cases. This can be due to internal failures or software issues.
- A second common cause is damaged wiring or poor connections in the communication network, which can lead to intermittent or complete communication loss.
- Thirdly, moisture ingress or corrosion in connectors can also result in the C0C60 code. Regular inspections can help prevent this.
- Less commonly, issues with the vehicle's battery or charging system can affect the PCM's operation and lead to this code.
- A rare but possible cause is a conflict with aftermarket electronic accessories that interfere with the PCM's communication.
C0C60 Repair Costs
Cost Breakdown by Repair Type
PCM Replacement
Replacing the faulty powertrain control module if it is determined to be defective.
- Total: $800 - $1200
- Success rate: 85%
Wiring Repair
Repairing damaged wiring or connectors in the communication network.
- Total: $150 - $400
- Success rate: 75%
Money-Saving Tips for C0C60
- Start with the most common and least expensive repairs first
- Use GeekOBD APP to confirm diagnosis before replacing expensive parts
- Consider preventive maintenance to avoid future occurrences
- Compare prices for OEM vs aftermarket parts based on your needs
- Address the issue promptly to prevent more expensive secondary damage
Diagnostic Steps
Professional C0C60 Diagnosis Process
Follow these systematic steps to accurately diagnose C0C60. Each step builds on the previous one to ensure accurate diagnosis.
Step 1: Step 1: Perform a visual inspection of all wiring and connectors related to the PCM and communication network for signs of damage or corrosion (5-10 minutes)
Step 1: Perform a visual inspection of all wiring and connectors related to the PCM and communication network for signs of damage or corrosion (5-10 minutes).
Step 2: Step 2: Use the GeekOBD APP to conduct an OBD2 scan and retrieve all existing codes along with freeze frame data to understand the context of the C0C60 code (10-15 minutes)
Step 2: Use the GeekOBD APP to conduct an OBD2 scan and retrieve all existing codes along with freeze frame data to understand the context of the C0C60 code (10-15 minutes).
Step 3: Step 3: Test the suspected components using a multimeter to ensure they are functioning within specifications (20-30 minutes)
Step 3: Test the suspected components using a multimeter to ensure they are functioning within specifications (20-30 minutes).
Step 4: Step 4: If repairs are made, conduct a system function test to confirm proper operation and clear codes using the GeekOBD APP (10-15 minutes)
Step 4: If repairs are made, conduct a system function test to confirm proper operation and clear codes using the GeekOBD APP (10-15 minutes).
Step 5: Step 5: Complete a road test to verify that the repair has resolved the issue and that no new codes appear (15-20 minutes)
Step 5: Complete a road test to verify that the repair has resolved the issue and that no new codes appear (15-20 minutes).
Important Notes
- Always verify the repair with GeekOBD APP after completing diagnostic steps
- Clear codes and test drive to ensure the problem is resolved
- Address underlying causes to prevent code recurrence
Real Repair Case Studies
Case Study 1: C0C60 Code Resolution in 2018 Ford F-250
Vehicle: 2018 Ford F-250, 45,000 miles
Problem: Customer reported the check engine light was on and experienced erratic engine performance.
Diagnosis: After scanning with GeekOBD APP, the C0C60 code was confirmed. A visual inspection revealed corroded connectors in the wiring harness.
Solution: Replaced corroded connectors and cleaned the wiring. Cleared the codes and performed a road test.
Cost: $300 (diagnosis and repairs included)
Result: The check engine light was resolved, and the vehicle's performance returned to normal.
Case Study 2: Resolving Communication Issues in 2019 Ford F-150
Vehicle: 2019 Ford F-150, 30,000 miles
Problem: Customer experienced multiple electronic failures and received the C0C60 code.
Diagnosis: Using the GeekOBD APP, further diagnostics revealed a faulty PCM as the primary culprit.
Solution: Replaced the PCM and reprogrammed it to the vehicle. Successful communication was restored.
Cost: $1,100 (PCM replacement and programming)
Result: All electronic functions were restored, and no further issues were reported.