Quick Answer
C0CC6 means: C0CC6 signifies a communication error between the PCM and BCM.
Can I drive with C0CC6? Immediate attention is recommended to prevent further electrical issues.
Common Questions
What does C0CC6 mean and how does it affect my car?
C0CC6 indicates a communication failure between the powertrain control module and the body control module in your vehicle. This can lead to various electrical issues, affecting systems like lighting and power accessories. Over time, if left unresolved, the vehicle's performance may degrade, leading to more costly repairs.
What are the most common causes of C0CC6 and how much does it cost to fix?
Common causes of C0CC6 include damaged wiring, corroded connectors, and faulty modules. Fixing these issues can range from $150 for wiring repairs to $800 for replacing a body control module, depending on the extent of the damage.
Can I drive my car with C0CC6 or should I stop immediately?
While you may be able to drive with C0CC6, it's not advisable as it could lead to unpredictable electrical failures. For safety, it's best to address the issue promptly to avoid further complications.
How can I diagnose C0CC6 myself using GeekOBD APP?
To diagnose C0CC6 using the GeekOBD APP, first connect the app to your vehicle's OBD2 port. Run a full diagnostic scan to retrieve the C0CC6 code along with any additional codes. Review the freeze frame data to assess the conditions under which the error occurred and check for any related issues.
What vehicles are most commonly affected by C0CC6?
C0CC6 is frequently seen in 2016-2020 Ford F-150 models, but may also affect other vehicles with similar electronic systems. Always check for any recalls or technical service bulletins that may pertain to your model.
How can I prevent C0CC6 from happening again?
To prevent C0CC6 from recurring, regularly inspect your vehicle's wiring and connectors for signs of wear or corrosion. Keeping your vehicle's electrical systems clean and dry, as well as scheduling routine maintenance, can also help.
What is C0CC6?
The diagnostic trouble code C0CC6 generally indicates a communication issue between the vehicle's powertrain control module (PCM) and the body control module (BCM). This is particularly relevant in vehicles like the 2016-2020 Ford F-150, where complex electronic systems are prevalent. When this code appears, it can lead to various electrical malfunctions, impacting features such as lighting, power windows, and even engine performance. Drivers may notice that their vehicle's systems are acting erratically, which can be both frustrating and concerning. The C0CC6 code typically arises due to wiring issues, corroded connectors, or faults within the modules themselves. Ignoring this code could lead to more severe electrical problems down the line, potentially affecting vehicle safety and performance. Therefore, understanding and addressing the C0CC6 code is crucial for maintaining the overall health of your vehicle.
System: C - Chassis (ABS, Steering, Suspension)
Symptoms
Common symptoms when C0CC6 is present:
- Check engine light stays on constantly, indicating a persistent issue that needs troubleshooting.
- Power windows may operate erratically, causing frustration for drivers who rely on these features.
- Engine performance issues may arise, such as stalling or hesitation during acceleration, leading to unsafe driving conditions.
- Inconsistent operation of dashboard lights and indicators, which can obscure critical information from the driver.
- Inoperative features such as power locks and interior lights, resulting in inconvenience and potential safety concerns.
Possible Causes
Most common causes of C0CC6 (ordered by frequency):
- The most common cause is damaged wiring or loose connections, which occurs in about 60% of cases, often due to wear and tear or environmental factors.
- Another frequent cause is corroded connectors, particularly in older vehicles or those exposed to moisture, which can interrupt communication between modules.
- Faulty body control modules represent about 20% of cases; replacing these components can restore proper communication.
- Less commonly, software glitches in the PCM or BCM can lead to this code; updating the vehicle's software might resolve the issue.
- Rarely, issues with the vehicle’s ground connections can cause communication errors, leading to a need for thorough inspection.
C0CC6 Repair Costs
Cost Breakdown by Repair Type
Wiring Repair
Repairing or replacing damaged wiring or connectors to ensure proper communication.
- Total: $150 - $500
- Success rate: 85%
Body Control Module Replacement
Replacing the faulty BCM that is causing communication errors.
- Total: $400 - $800
- Success rate: 90%
Money-Saving Tips for C0CC6
- Start with the most common and least expensive repairs first
- Use GeekOBD APP to confirm diagnosis before replacing expensive parts
- Consider preventive maintenance to avoid future occurrences
- Compare prices for OEM vs aftermarket parts based on your needs
- Address the issue promptly to prevent more expensive secondary damage
Diagnostic Steps
Professional C0CC6 Diagnosis Process
Follow these systematic steps to accurately diagnose C0CC6. Each step builds on the previous one to ensure accurate diagnosis.
Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes)
Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes).
Step 2: Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes)
Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes).
Step 3: Step 3: Component testing - Use a multimeter or specific diagnostic tools to test suspected components (20-30 minutes)
Step 3: Component testing - Use a multimeter or specific diagnostic tools to test suspected components (20-30 minutes).
Step 4: Step 4: System function test - Verify proper operation after repairs and clear codes (10-15 minutes)
Step 4: System function test - Verify proper operation after repairs and clear codes (10-15 minutes).
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success (15-20 minutes)
Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success (15-20 minutes).
Important Notes
- Always verify the repair with GeekOBD APP after completing diagnostic steps
- Clear codes and test drive to ensure the problem is resolved
- Address underlying causes to prevent code recurrence
Real Repair Case Studies
Case Study 1: C0CC6 Repair on 2017 Ford F-150
Vehicle: 2017 Ford F-150, 45,000 miles
Problem: Customer reported intermittent power window failures and check engine light.
Diagnosis: After scanning for codes, C0CC6 was found alongside other codes. A visual inspection revealed damaged wiring at the driver's door.
Solution: Repaired the damaged wiring and cleared the codes. All systems functioned correctly afterward.
Cost: $200 (wiring repair and diagnostic fee)
Result: Customer reported all features working normally after repair.
Case Study 2: Body Control Module Replacement on 2019 Ford Explorer
Vehicle: 2019 Ford Explorer, 30,000 miles
Problem: Customer experienced flickering dashboard lights and power lock issues.
Diagnosis: Diagnostic scan revealed C0CC6 and further testing indicated a faulty body control module.
Solution: Replaced the body control module and reprogrammed it to the vehicle.
Cost: $600 (including parts and labor)
Result: All electrical systems were restored to normal operation.