C0CE7 - Understanding and Fixing This Code in 2015-2022 Ford Explorers and Lincoln Aviators

Quick Answer

C0CE7 means: C0CE7 indicates a fault in the brake pedal position sensor.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with C0CE7? Immediate attention is advised to ensure safe operation of your vehicle.

Common Questions

What does C0CE7 mean and how does it affect my car?

The C0CE7 code indicates an issue with the brake pedal position sensor, which is crucial for the proper operation of your vehicle's braking and stability systems. If this sensor fails, it can lead to safety concerns such as erratic braking and issues with cruise control.

What are the most common causes of C0CE7 and how much does it cost to fix?

The most frequent cause of C0CE7 is a faulty brake pedal position sensor, which typically costs between $150 and $300 to replace. Other causes, like wiring issues, may cost about $100 to $250, while software glitches can be resolved with an ECM update for $50 to $150.

Can I drive my car with C0CE7 or should I stop immediately?

It’s advisable to stop driving your vehicle if C0CE7 is present, as this code can compromise your braking system’s reliability. Continuing to drive may pose serious safety risks.

How can I diagnose C0CE7 myself using GeekOBD APP?

To diagnose C0CE7 with GeekOBD APP, first connect the app to your vehicle's OBD2 port. Run a full system scan to retrieve the code, then access freeze frame data to analyze vehicle performance at the time of the fault.

What vehicles are most commonly affected by C0CE7?

The C0CE7 code is commonly found in 2015-2022 Ford Explorers and Lincoln Aviators, among other models within the Ford family. Check for any recalls related to the brake system for these vehicles.

How can I prevent C0CE7 from happening again?

Regular maintenance is key to preventing C0CE7. Inspect your brake system annually, including checking the brake pedal position sensor and associated wiring for wear or damage.

What is C0CE7?

The DTC code C0CE7 typically indicates a problem with the vehicle’s brake system, specifically related to the brake pedal position sensor. When this code appears, it means that the Engine Control Module (ECM) has detected a discrepancy in the signal from the brake pedal position sensor, which can affect the functionality of various systems in your vehicle. This is especially critical because the brake system is integral to vehicle safety. The brake pedal position sensor is responsible for relaying information about the position of the brake pedal to the ECM, which, in turn, manages several functions such as cruise control, anti-lock braking systems (ABS), and stability control. If the signal is faulty or intermittent, it can lead to erratic behavior of these systems. Common symptoms include the illumination of the check engine light, issues with cruise control disengagement, or even unintended acceleration. The real-world implication is that driving with this code could significantly impact your vehicle’s safety features, potentially leading to a hazardous situation if not addressed promptly. Addressing the C0CE7 code requires a thorough diagnostic approach to pinpoint the exact cause, whether it be a sensor failure, wiring issue, or a software glitch.

System: C - Chassis (ABS, Steering, Suspension)

Symptoms

Common symptoms when C0CE7 is present:

  • The check engine light remains illuminated consistently, indicating a potential issue with brake system sensors.
  • Cruise control may not function properly, with the system failing to disengage when the brake pedal is pressed.
  • Drivers may experience unexpected engine hesitation during acceleration, which can be alarming and dangerous.
  • There may be erratic behavior from the ABS system, leading to inconsistent braking performance.
  • A noticeable decrease in fuel efficiency, possibly due to the ECM attempting to compensate for the erratic brake signal.

Possible Causes

Most common causes of C0CE7 (ordered by frequency):

  1. A faulty brake pedal position sensor is the most common cause, with a likelihood of around 70%. This sensor may wear out or fail due to electrical issues.
  2. Wiring problems, such as frayed or corroded connections, can lead to intermittent signals, accounting for about 20% of cases. Proper inspection of wiring is crucial.
  3. Software glitches in the vehicle's ECM can also trigger this code, though this is less common; updating the system's software may resolve the issue.
  4. Less common causes include issues with the brake booster or master cylinder, which can affect the brake system's overall performance.
  5. Rarely, issues related to the vehicle's stability control system can result in this code being triggered.

C0CE7 Repair Costs

Cost Breakdown by Repair Type

Brake Pedal Position Sensor Replacement

Replacing the faulty brake pedal position sensor to restore proper function.

  • Total: $150 - $300
  • Success rate: 90%
Wiring Repair or Replacement

Repairing or replacing damaged wiring associated with the brake system.

  • Total: $100 - $250
  • Success rate: 85%
ECM Software Update

Updating the ECM software to fix glitches causing false codes.

  • Total: $50 - $150
  • Success rate: 75%
Money-Saving Tips for C0CE7
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional C0CE7 Diagnosis Process

Follow these systematic steps to accurately diagnose C0CE7. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter to test the brake pedal position sensor for proper voltage and resistance (20-30 minutes)

Step 3: Component testing - Use a multimeter to test the brake pedal position sensor for proper voltage and resistance (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - Verify proper operation after repairs and clear codes using the GeekOBD APP (10-15 minutes)

Step 4: System function test - Verify proper operation after repairs and clear codes using the GeekOBD APP (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success and watch for any warning lights (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success and watch for any warning lights (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Brake Sensor Replacement on a 2018 Ford Explorer

Vehicle: 2018 Ford Explorer, 45,000 miles

Problem: Customer reported a persistent check engine light and issues with cruise control functionality.

Diagnosis: After using the GeekOBD APP, the C0CE7 code was retrieved, and further inspection revealed a faulty brake pedal position sensor.

Solution: Replaced the brake pedal position sensor and cleared the codes using the OBD2 scanner.

Cost: $250 for part and labor

Result: Post-repair, the check engine light was off, and cruise control was functioning correctly.

Case Study 2: Wiring Repair on a 2020 Lincoln Aviator

Vehicle: 2020 Lincoln Aviator, 30,000 miles

Problem: Customer experienced intermittent braking issues and a check engine light.

Diagnosis: Diagnostic testing revealed C0CE7, and wiring inspection showed corroded connections.

Solution: Repaired the damaged wiring and cleaned the connectors.

Cost: $200 for repairs

Result: After repairs, the vehicle operated normally with no further issues.

Diagnose C0CE7

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: C0CE7
System: Chassis (ABS, Steering, Suspension)
Severity: HIGH
Category: Chassis Codes