P0062 - Understanding the Throttle Position Sensor Code in 2015-2018 Honda Civic and Other Models

Quick Answer

P0062 means: P0062 indicates a low input signal from the Throttle Position Sensor to the ECM.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with P0062? Immediate attention is recommended to avoid performance issues and potential safety risks.

Common Questions

What does P0062 mean and how does it affect my car?

P0062 indicates a low input signal from the Throttle Position Sensor (TPS) to your car's Engine Control Module (ECM). This can lead to poor engine performance, reduced fuel efficiency, and increased emissions. If not addressed, it could cause stalling or difficulty accelerating, making your vehicle unsafe to drive.

What are the most common causes of P0062 and how much does it cost to fix?

Common causes of P0062 include a faulty throttle position sensor, damaged wiring, or issues with the ECM itself. Repair costs can range from $100 to $300 depending on whether you need to replace the sensor or repair wiring.

Can I drive my car with P0062 or should I stop immediately?

While you may be able to drive with a P0062 code, it's not advisable. Ignoring this code can lead to more serious engine problems or safety issues, so it's best to have it diagnosed and repaired as soon as possible.

How can I diagnose P0062 myself using GeekOBD APP?

To diagnose P0062 using the GeekOBD APP, first, connect the app to your vehicle's OBD2 port. Scan for trouble codes and retrieve freeze frame data to analyze the conditions under which the error occurred. Check the TPS readings in real-time to see if they fluctuate appropriately as you press the accelerator.

What vehicles are most commonly affected by P0062?

Common vehicles affected by P0062 include the 2015-2018 Honda Civic, Toyota Corolla, and Ford Focus. If you own one of these models, it's important to monitor for symptoms of this trouble code.

How can I prevent P0062 from happening again?

To prevent P0062, regularly check and maintain your vehicle's throttle system, including cleaning the throttle body and ensuring wiring and connectors are intact. Scheduling routine diagnostics with tools like the GeekOBD APP can help catch issues early.

What is P0062?

The P0062 diagnostic trouble code (DTC) indicates an issue with the Throttle Position Sensor (TPS) circuit, particularly a low input signal detected by the Engine Control Module (ECM). This code is prevalent in various vehicles, including the 2015-2018 Honda Civic, Toyota Camry, and Ford Focus. The throttle position sensor is a critical component that monitors the position of the throttle valve, providing feedback to the ECM to optimize engine performance, fuel efficiency, and emissions control. When the TPS fails or the signal is too low, the ECM cannot accurately regulate the air-fuel mixture, leading to performance issues such as rough idling, stalling, and decreased acceleration. In the worst-case scenario, the vehicle may enter limp mode, limiting speed and power to protect the engine. Understanding P0062 is crucial for vehicle owners as it directly impacts the drivability and safety of their cars. A low TPS signal can occur due to faulty wiring, a defective sensor, or issues with the ECM itself. Therefore, addressing this code promptly can prevent further engine complications and expensive repairs.

System: P - Powertrain (Engine, Transmission, Emissions)

Symptoms

Common symptoms when P0062 is present:

  • The check engine light stays on constantly, indicating a problem that requires immediate attention.
  • Engine hesitates during acceleration, leading to a lack of power and responsiveness when you press the gas pedal.
  • Fuel economy decreased by 10-15%, which could lead to higher fuel costs over time.
  • Rough idling, where the engine may shake or vibrate significantly while at a standstill.
  • Unexpected stalling, especially during low-speed maneuvers or when coming to a stop.

Possible Causes

Most common causes of P0062 (ordered by frequency):

  1. The most common cause is a faulty throttle position sensor, which has a 60% likelihood of being the root issue. This component can wear out over time or suffer from contaminants.
  2. The second most common cause is damaged wiring or poor connections in the TPS circuit. Corrosion or loose connections can disrupt the signal, leading to a low input.
  3. Another cause could be a malfunctioning ECM, which may misinterpret signals from the TPS due to internal faults. Regular software updates can sometimes prevent these issues.
  4. Less common but serious causes include vacuum leaks in the intake manifold that can affect the throttle's performance.
  5. A rare but possible cause is a failed throttle body assembly, leading to improper airflow management and triggering the P0062 code.

P0062 Repair Costs

Cost Breakdown by Repair Type

Throttle Position Sensor Replacement

Replacing the faulty throttle position sensor with a new OEM part.

  • Total: $150 - $300
  • Success rate: 90%
Wiring Repair

Repairing or replacing damaged wiring and connectors in the TPS circuit.

  • Total: $100 - $200
  • Success rate: 80%
Money-Saving Tips for P0062
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional P0062 Diagnosis Process

Follow these systematic steps to accurately diagnose P0062. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter or specific diagnostic tools to test the TPS and associated wiring for proper voltage and continuity (20-30 minutes)

Step 3: Component testing - Use a multimeter or specific diagnostic tools to test the TPS and associated wiring for proper voltage and continuity (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - After repairs, verify proper operation of the throttle system and clear codes to ensure the issue is resolved (10-15 minutes)

Step 4: System function test - After repairs, verify proper operation of the throttle system and clear codes to ensure the issue is resolved (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success and that the check engine light does not reappear (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success and that the check engine light does not reappear (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Throttle Position Sensor Replacement in 2016 Honda Civic

Vehicle: 2016 Honda Civic, 45,000 miles

Problem: Customer reported check engine light and engine hesitation during acceleration.

Diagnosis: Diagnostic scan revealed P0062 code. Visual inspection showed corrosion on the TPS connector.

Solution: Replaced the throttle position sensor and cleaned the connector.

Cost: $250 (sensor $150, labor $100)

Result: Check engine light cleared and vehicle performance returned to normal.

Case Study 2: Wiring Repair on a 2017 Toyota Camry

Vehicle: 2017 Toyota Camry, 38,000 miles

Problem: Customer noticed rough idling and decreased fuel efficiency.

Diagnosis: P0062 code confirmed with an OBD2 scan. Found damaged wiring in the TPS circuit.

Solution: Repaired the wiring and reconnected the TPS.

Cost: $150 (labor $50, parts $100)

Result: Engine performance improved and fuel economy restored.

Diagnose P0062

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: P0062
System: Powertrain (Engine, Transmission, Emissions)
Severity: HIGH
Category: Engine Codes