P007E - Understanding Common in 2015-2018 Honda Civic and Other Models

Quick Answer

P007E means: P007E indicates a fault with the Ambient Air Temperature Sensor circuit.

Fix: Check and replace faulty components Cost: $100 - $250 Time: 90-180 minutes

Can I drive with P007E? Recommended to address within a few days to avoid potential performance issues.

Common Questions

What does P007E mean and how does it affect my car?

The P007E code indicates a problem with the Ambient Air Temperature Sensor. This sensor is vital for your vehicle's engine management system, affecting how the engine runs and how the air conditioning operates. If this sensor isn't working correctly, you may notice poor engine performance or inconsistent climate control. Over time, this can lead to increased fuel consumption and more serious engine issues.

What are the most common causes of P007E and how much does it cost to fix?

Common causes include a faulty Ambient Air Temperature Sensor, which can cost between $100 and $250 to replace, and damaged wiring, which may range from $75 to $150 for repairs. Proper diagnostics are essential to pinpoint the exact issue before proceeding with repairs.

Can I drive my car with P007E or should I stop immediately?

While you may continue to drive your vehicle with the P007E code, it's advisable to address the issue soon. Ignoring it could lead to reduced fuel efficiency and performance problems, so plan to have it checked within a few days.

How can I diagnose P007E myself using GeekOBD APP?

To diagnose P007E using the GeekOBD APP, start by connecting the app to your vehicle's OBD2 port. Run a full scan to check for DTCs, including P007E. Review freeze frame data for context, and then check the ambient air temperature readings against the actual temperature outside. If they differ significantly, further investigation is needed.

What vehicles are most commonly affected by P007E?

The P007E code is frequently reported in vehicles like the 2015-2018 Honda Civic, 2013-2016 Ford Fusion, and 2014-2017 Toyota Corolla, among others. Always check for recalls or technical service bulletins (TSBs) related to the specific make and model for additional guidance.

How can I prevent P007E from happening again?

To prevent P007E from recurring, perform regular vehicle maintenance. Regularly inspect wiring and connectors for damage, and keep the engine's air intake system clean. Also, consider using high-quality parts during repairs to ensure long-lasting performance.

What is P007E?

The Diagnostic Trouble Code (DTC) P007E refers to an issue with the Ambient Air Temperature Sensor, specifically indicating a problem with the sensor circuit or performance. This sensor is crucial for the vehicle's Engine Control Unit (ECU) as it monitors the temperature of the air outside the car. A malfunction can disrupt various functions, including air conditioning performance, fuel mixture calculations, and overall engine efficiency. When the ECU detects a discrepancy in the temperature readings, it may trigger the Check Engine Light (CEL) and potentially lead to reduced fuel efficiency and other performance issues. For instance, in models like the 2015-2018 Honda Civic, drivers might notice irregularities in climate control settings or engine performance. Ignoring this code could lead to more serious engine problems over time, as the incorrect data can affect how the engine operates under different conditions. Therefore, understanding and addressing the P007E code promptly is essential for maintaining vehicle performance and longevity.

System: P - Powertrain (Engine, Transmission, Emissions)

Symptoms

Common symptoms when P007E is present:

  • The Check Engine Light (CEL) illuminates on the dashboard, staying on constantly.
  • You may experience erratic performance from the air conditioning system, such as inconsistent temperatures or failure to cool effectively.
  • Fuel efficiency may decrease noticeably, often by around 10-15%, leading to increased fuel costs.
  • The engine might hesitate during acceleration or feel sluggish under load, affecting overall driving experience.
  • In some cases, you may notice unusual engine behavior, such as stalling or rough idling.

Possible Causes

Most common causes of P007E (ordered by frequency):

  1. The most common cause of P007E is a faulty Ambient Air Temperature Sensor, which can occur in approximately 60% of cases. This could be due to wear and tear, exposure to elements, or manufacturing defects.
  2. Another frequent cause is damaged or corroded wiring and connectors leading to the sensor. This can happen as a result of moisture exposure or road debris, accounting for about 25% of instances.
  3. In some cases, an ECU software issue may lead to incorrect readings, which can usually be resolved with a software update. Preventive measures include regular maintenance and software checks.
  4. A less common but serious cause is a significant air intake system leak, which can throw off temperature readings and result in poor engine performance.
  5. Rarely, a complete failure of the Engine Control Unit itself, although not typical, can lead to false readings and generate the P007E code.

P007E Repair Costs

Cost Breakdown by Repair Type

Ambient Air Temperature Sensor Replacement

Replacing the faulty sensor with an OEM part to ensure proper readings.

  • Total: $100 - $250
  • Success rate: 90%
Repairing Wiring Harness

Repairing or replacing damaged wiring related to the sensor.

  • Total: $75 - $150
  • Success rate: 85%
Money-Saving Tips for P007E
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional P007E Diagnosis Process

Follow these systematic steps to accurately diagnose P007E. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Perform an initial visual inspection

Step 1: Perform an initial visual inspection. Look for any signs of damaged wiring, loose connections, or corrosion around the Ambient Air Temperature Sensor (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: Utilize the GeekOBD APP to conduct an OBD2 scan

Step 2: Utilize the GeekOBD APP to conduct an OBD2 scan. Retrieve all codes and freeze frame data to gain context on the fault (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Conduct component testing using a multimeter to check the resistance and voltage of the Ambient Air Temperature Sensor (20-30 minutes)

Step 3: Conduct component testing using a multimeter to check the resistance and voltage of the Ambient Air Temperature Sensor (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: Perform a system function test to verify that the sensor is operating correctly after repairs and clear any codes (10-15 minutes)

Step 4: Perform a system function test to verify that the sensor is operating correctly after repairs and clear any codes (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Carry out a road test under various conditions to ensure the repair was successful and that no new codes appear (15-20 minutes)

Step 5: Carry out a road test under various conditions to ensure the repair was successful and that no new codes appear (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Ambient Air Temperature Sensor Replacement on 2016 Honda Civic

Vehicle: 2016 Honda Civic, 45,000 miles

Problem: Customer reported that the Check Engine Light was on, and air conditioning was not cooling properly.

Diagnosis: After scanning with the GeekOBD APP, the P007E code was identified. A visual inspection revealed a corroded connector.

Solution: Replaced the Ambient Air Temperature Sensor and repaired the wiring harness. Cleared the codes and performed a system test.

Cost: $180 (sensor: $120, labor: $60)

Result: The Check Engine Light turned off, and the air conditioning began functioning normally.

Case Study 2: Wiring Repair on 2015 Ford Fusion

Vehicle: 2015 Ford Fusion, 60,000 miles

Problem: Customer experienced intermittent Check Engine Light and fluctuating temperature readings.

Diagnosis: Diagnostic scanning revealed the P007E code. Inspection showed frayed wiring near the sensor.

Solution: Repaired the damaged wiring and replaced the connector. Conducted a system function test afterward.

Cost: $100 (wiring repair: $40, labor: $60)

Result: Post-repair, the vehicle showed no further codes, and temperature readings stabilized.

Diagnose P007E

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: P007E
System: Powertrain (Engine, Transmission, Emissions)
Severity: MEDIUM
Category: Engine Codes