P0367 - DTC P0367 - Camshaft Position Sensor 'B' Circuit Range/Performance Problem on Popular Vehicles

Quick Answer

P0367 means: P0367 indicates an issue with the camshaft position sensor 'B' circuit.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with P0367? Immediate attention is recommended to avoid potential engine damage.

Common Questions

What does P0367 mean and how does it affect my car?

P0367 indicates a problem with the camshaft position sensor 'B' circuit, impacting the engine's timing and performance. If you experience symptoms like rough idling or poor acceleration, it could lead to more significant issues if not addressed promptly.

What are the most common causes of P0367 and how much does it cost to fix?

The leading cause of P0367 is usually a faulty camshaft position sensor, costing around $150 to $300 to replace. Wiring issues are another common cause, with repair costs ranging from $100 to $200.

Can I drive my car with P0367 or should I stop immediately?

While you might be able to drive short distances, it is not advisable to ignore the P0367 code. Continuing to drive can lead to severe engine damage, so it's best to address the issue immediately.

How can I diagnose P0367 myself using GeekOBD APP?

Using the GeekOBD APP, start by scanning for codes and reviewing the freeze frame data. Then, perform a visual inspection of the sensor and wiring. You can also test the sensor's voltage output using a multimeter to confirm functionality.

What vehicles are most commonly affected by P0367?

P0367 is commonly seen in vehicles like the 2016-2019 Toyota Camry, 2012-2015 Honda Accord, and the 2010-2015 Ford Fusion. Always check for any recalls or technical service bulletins related to your specific model.

How can I prevent P0367 from happening again?

Regular maintenance is key. Ensure timely oil changes, as dirty oil can affect sensor performance. Also, check wiring and connections during routine inspections to catch potential issues early.

What is P0367?

The diagnostic trouble code (DTC) P0367 signifies a malfunction within the camshaft position sensor 'B' circuit, often leading to performance issues in vehicles. This code can indicate that the Engine Control Module (ECM) is detecting an abnormal reading from the camshaft position sensor, which is crucial for engine timing and overall performance. The camshaft position sensor monitors the position of the camshaft, communicating this information to the ECM to optimize fuel injection and ignition timing. When the ECM identifies readings that are out of range or inconsistent, it triggers the P0367 code. Common symptoms associated with this code include rough idling, poor acceleration, and a decrease in fuel efficiency. If left unaddressed, it can lead to more severe engine problems, including stalling or failure to start, especially in specific makes and models like the 2016-2019 Toyota Camry or the 2012-2015 Honda Accord. Regular inspections and timely repairs are essential to ensure optimal engine performance and longevity.

System: P - Powertrain (Engine, Transmission, Emissions)

Symptoms

Common symptoms when P0367 is present:

The check engine light illuminates and stays on, indicating a fault in the engine management system.
Engine performance issues such as rough idling or stalling during acceleration, often making driving difficult.
A noticeable drop in fuel economy, with reports of decreased mileage by up to 15%, which can significantly impact your budget.
Difficulties in starting the engine, with an extended cranking time or failure to start altogether, particularly in cold weather.
Unusual engine noises or vibrations, indicating that the timing may be off due to incorrect camshaft positioning.

Possible Causes

Most common causes of P0367 (ordered by frequency):

The most common cause of P0367 is a faulty camshaft position sensor, which is responsible for relaying crucial information to the ECM. This issue occurs in approximately 60% of cases.
Another frequent culprit is damaged wiring or poor connections in the camshaft position sensor circuit, which can lead to intermittent signals being sent to the ECM.
A dirty or faulty variable valve timing (VVT) solenoid can also cause the P0367 code, affecting the sensor's ability to function properly. Regular maintenance and cleaning can help prevent this issue.
Less common, but serious, is a timing chain or belt issue, which can lead to severe engine damage if the camshaft and crankshaft become out of sync.
Rarely, software glitches in the ECM may falsely trigger the P0367 code, necessitating a software update to resolve the issue.

P0367 Repair Costs

Cost Breakdown by Repair Type

Camshaft Position Sensor Replacement

Replacing the faulty camshaft position sensor with an OEM part typically resolves the issue.

Total: $150 - $300
Success rate: 90%

Wiring Repair

Repairing damaged wiring or connectors in the camshaft sensor circuit.

Total: $100 - $200
Success rate: 85%

VVT Solenoid Replacement

Replacing the variable valve timing solenoid if it is contributing to the P0367 code.

Total: $200 - $400
Success rate: 80%

Money-Saving Tips for P0367

Start with the most common and least expensive repairs first
Use GeekOBD APP to confirm diagnosis before replacing expensive parts
Consider preventive maintenance to avoid future occurrences
Compare prices for OEM vs aftermarket parts based on your needs
Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional P0367 Diagnosis Process

Follow these systematic steps to accurately diagnose P0367. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion on the camshaft position sensor and its connectors (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion on the camshaft position sensor and its connectors (5-10 minutes).