Quick Answer
P06CC means: P06CC indicates a problem with the engine oil pressure control circuit.
Can I drive with P06CC? Immediate attention is recommended to prevent engine damage.
Common Questions
What does P06CC mean and how does it affect my car?
The P06CC code indicates a problem with oil pressure control, which can lead to engine damage if not addressed. It’s crucial to monitor oil levels and pressure to maintain engine health.
What are the most common causes of P06CC and how much does it cost to fix?
Common causes include a faulty oil pressure sensor or low oil levels, with repair costs ranging from $150 to $600 depending on the issue.
Can I drive my car with P06CC or should I stop immediately?
It's not advisable to drive your car if the P06CC code is present, as it indicates potential oil pressure issues that could lead to engine damage.
How can I diagnose P06CC myself using GeekOBD APP?
Using the GeekOBD APP, you can scan for trouble codes, check oil pressure readings, and monitor real-time data, which will help you pinpoint the issue.
What vehicles are most commonly affected by P06CC?
Vehicles like the 2016-2020 Chevrolet Silverado and the 2017 Chevrolet Malibu frequently experience the P06CC code due to their similar engine designs.
How can I prevent P06CC from happening again?
Regular oil changes, maintaining proper oil levels, and conducting routine inspections can help prevent the recurrence of the P06CC code.
What is P06CC?
The diagnostic trouble code (DTC) P06CC indicates that the engine control module (ECM) has detected a malfunction within the engine oil pressure control circuit. This code is often triggered when the ECM receives information from the oil pressure sensor that does not align with its expected values. For instance, if the oil pressure falls below or exceeds the normal range, the ECM will flag this code. The implications of a P06CC code can be severe, as inadequate oil pressure can lead to engine damage over time. Drivers may experience poor engine performance, reduced fuel economy, and in extreme cases, engine failure. Regular maintenance, including oil changes and checking the oil level, is crucial to prevent this issue. If you own a vehicle like the 2017 Chevrolet Malibu or the 2018 GMC Terrain, being aware of this code can help you catch problems early. Ignoring the P06CC code can lead to costly repairs, so it is essential to address it promptly.
System: P - Powertrain (Engine, Transmission, Emissions)
Symptoms
Common symptoms when P06CC is present:
- Check engine light illuminates and remains on, indicating that there is an issue that needs to be addressed.
- Engine may hesitate during acceleration, causing a noticeable lag when pressing the gas pedal.
- Fuel economy may decrease by 10-20%, which could lead to more frequent trips to the gas station.
- Unusual engine noises may occur, such as knocking or ticking sounds, due to inadequate lubrication.
- Oil pressure warning light may activate on the dashboard, indicating low oil pressure levels.
Possible Causes
Most common causes of P06CC (ordered by frequency):
- The most common cause is a faulty oil pressure sensor, which is responsible for relaying information to the ECM. This issue has a likelihood of about 40%.
- Another potential cause is low engine oil levels, which can result from leaks or insufficient maintenance. Regular checks can help prevent this.
- A malfunctioning oil pump can also trigger this code, leading to inadequate oil flow. Monitoring oil pressure can help catch this early.
- Less common but serious causes include internal engine wear, which can lead to oil starvation and severe engine damage.
- Rarely, wiring issues or poor connections in the oil pressure control circuit can cause erroneous readings and trigger the P06CC code.
P06CC Repair Costs
Cost Breakdown by Repair Type
Oil Pressure Sensor Replacement
Replacing a faulty oil pressure sensor will restore accurate readings.
- Total: $150 - $250
- Success rate: 85%
Oil Pump Replacement
If the oil pump is faulty, replacing it will ensure proper oil flow to the engine.
- Total: $400 - $600
- Success rate: 90%
Wiring Repair
Repairing damaged wiring in the oil pressure circuit.
- Total: $100 - $200
- Success rate: 80%
Money-Saving Tips for P06CC
- Start with the most common and least expensive repairs first
- Use GeekOBD APP to confirm diagnosis before replacing expensive parts
- Consider preventive maintenance to avoid future occurrences
- Compare prices for OEM vs aftermarket parts based on your needs
- Address the issue promptly to prevent more expensive secondary damage
Diagnostic Steps
Professional P06CC Diagnosis Process
Follow these systematic steps to accurately diagnose P06CC. Each step builds on the previous one to ensure accurate diagnosis.
Step 1: Step 1: Perform an initial visual inspection to check for any obvious signs of damage, such as frayed wires or loose connections (5-10 minutes)
Step 1: Perform an initial visual inspection to check for any obvious signs of damage, such as frayed wires or loose connections (5-10 minutes).
Step 2: Step 2: Conduct an OBD2 scan using the GeekOBD APP to retrieve all trouble codes and freeze frame data for more context (10-15 minutes)
Step 2: Conduct an OBD2 scan using the GeekOBD APP to retrieve all trouble codes and freeze frame data for more context (10-15 minutes).
Step 3: Step 3: Test the oil pressure sensor and wiring using a multimeter to ensure they are functioning correctly (20-30 minutes)
Step 3: Test the oil pressure sensor and wiring using a multimeter to ensure they are functioning correctly (20-30 minutes).
Step 4: Step 4: After performing repairs, conduct a system function test to verify proper operation and clear the codes (10-15 minutes)
Step 4: After performing repairs, conduct a system function test to verify proper operation and clear the codes (10-15 minutes).
Step 5: Step 5: Take the vehicle for a road test under various conditions to confirm the success of the repair (15-20 minutes)
Step 5: Take the vehicle for a road test under various conditions to confirm the success of the repair (15-20 minutes).
Important Notes
- Always verify the repair with GeekOBD APP after completing diagnostic steps
- Clear codes and test drive to ensure the problem is resolved
- Address underlying causes to prevent code recurrence
Real Repair Case Studies
Case Study 1: Oil Pressure Sensor Replacement on 2018 Chevrolet Malibu
Vehicle: 2018 Chevrolet Malibu, 45,000 miles
Problem: Customer reported that the check engine light was on, and they noticed decreased fuel efficiency.
Diagnosis: After scanning with the GeekOBD APP, the P06CC code was present. A visual inspection revealed a faulty oil pressure sensor.
Solution: Replaced the oil pressure sensor and cleared the codes.
Cost: $180 (sensor $120 + labor $60)
Result: The check engine light was resolved, and fuel efficiency returned to normal.
Case Study 2: Oil Pump Replacement on 2019 GMC Terrain
Vehicle: 2019 GMC Terrain, 30,000 miles
Problem: Customer experienced engine hesitation and the oil pressure warning light was on.
Diagnosis: Diagnostic testing indicated low oil pressure and the P06CC code confirmed an oil pump failure.
Solution: Replaced the oil pump and gasket.
Cost: $550 (pump $450 + labor $100)
Result: Performance improved significantly and warning light was extinguished.