P0805 - Clutch Position Sensor Circuit Range/Performance Problem in Common Vehicles

Quick Answer

P0805 means: P0805 indicates a clutch position sensor issue that can affect transmission performance.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with P0805? Immediate attention is recommended to prevent further damage.

Common Questions

What does P0805 mean and how does it affect my car?

The P0805 code indicates a problem with the clutch position sensor, affecting how your vehicle's transmission operates. If this code appears, you may notice shifting difficulties or stalling, which can lead to more serious transmission issues if not addressed.

What are the most common causes of P0805 and how much does it cost to fix?

Common causes include a faulty clutch position sensor, damaged wiring, or issues with the engine control module. Repair costs typically range from $150 to $300 for sensor replacement, depending on the vehicle and labor rates.

Can I drive my car with P0805 or should I stop immediately?

It's advisable to avoid driving the vehicle until the issue is resolved, as shifting difficulties can lead to unsafe driving conditions and potential further damage to the transmission.

How can I diagnose P0805 myself using GeekOBD APP?

You can use the GeekOBD APP to scan for the P0805 code, view freeze frame data, and monitor sensor readings. This will help you understand if the clutch position sensor is functioning correctly or if repairs are needed.

What vehicles are most commonly affected by P0805?

Commonly affected vehicles include the 2011-2016 Ford Fiesta, 2014-2018 Chevrolet Sonic, and 2013-2017 Nissan Sentra. Check for any recalls or service bulletins related to the clutch system in these models.

How can I prevent P0805 from happening again?

Regular maintenance, including checking the clutch system and ensuring connections are secure, can help prevent the occurrence of P0805. Periodic diagnostics with the GeekOBD APP can also catch issues before they become serious.

What is P0805?

The diagnostic trouble code (DTC) P0805 indicates a problem with the clutch position sensor circuit, which is crucial for the proper functioning of your vehicle's transmission system. This code is most commonly encountered in vehicles with manual transmission, such as the 2011-2016 Ford Fiesta and the 2014-2018 Chevrolet Sonic. The clutch position sensor monitors the position of the clutch pedal and sends this information to the engine control module (ECM). If the sensor fails or if there are issues with the circuit, the ECM may not be able to determine if the clutch is engaged or disengaged, leading to performance issues. Common symptoms include difficulty shifting gears, unexpected engine stalling, or a persistent check engine light. Ignoring this code could lead to further transmission problems and may affect fuel efficiency. It’s crucial to address P0805 promptly to avoid costly repairs and ensure your vehicle operates smoothly.

System: P - Powertrain (Engine, Transmission, Emissions)

Symptoms

Common symptoms when P0805 is present:

  • The check engine light stays on constantly, indicating a persistent issue that requires attention.
  • Drivers may experience difficulty shifting gears, particularly when trying to engage or disengage the clutch, leading to a frustrating driving experience.
  • There may be noticeable engine stalling, especially when trying to accelerate or shift, which can pose safety risks.
  • Fuel economy could decrease by 10-15% as the engine struggles to find the right balance due to sensor inaccuracies.
  • In some cases, unusual noises may be heard from the transmission area when attempting to shift gears.

Possible Causes

Most common causes of P0805 (ordered by frequency):

  1. The most common cause of P0805 is a faulty clutch position sensor, with about 60% likelihood. This can result from wear and tear or electrical failures.
  2. Another cause could be damaged wiring or poor connections within the clutch position sensor circuit, leading to intermittent signals to the ECM.
  3. A third potential cause is a malfunctioning ECM, which may misinterpret signals from the clutch position sensor. Regular updates and diagnostics can help prevent this.
  4. Less commonly, a failing clutch assembly can lead to issues that trigger the P0805 code, affecting overall vehicle performance.
  5. A rare cause could be software glitches in the vehicle’s onboard computer, which may require professional reprogramming or updates.

P0805 Repair Costs

Cost Breakdown by Repair Type

Clutch Position Sensor Replacement

Replacing the faulty clutch position sensor with a new one to restore functionality.

  • Total: $150 - $300
  • Success rate: 85%
Wiring Repair

Repairing or replacing damaged wiring and connectors within the clutch position sensor circuit.

  • Total: $50 - $150
  • Success rate: 75%
Money-Saving Tips for P0805
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional P0805 Diagnosis Process

Follow these systematic steps to accurately diagnose P0805. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Use the app to retrieve all codes and freeze frame data to understand the fault context (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Use the app to retrieve all codes and freeze frame data to understand the fault context (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter to test the clutch position sensor’s output voltage and resistance (20-30 minutes)

Step 3: Component testing - Use a multimeter to test the clutch position sensor’s output voltage and resistance (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - After repairs, verify proper operation of the sensor and clear codes in the GeekOBD APP (10-15 minutes)

Step 4: System function test - After repairs, verify proper operation of the sensor and clear codes in the GeekOBD APP (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success and ensure no additional issues arise (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success and ensure no additional issues arise (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Clutch Sensor Replacement in a 2014 Ford Fiesta

Vehicle: 2014 Ford Fiesta, 75,000 miles

Problem: The customer reported difficulty shifting gears and a persistent check engine light.

Diagnosis: Initial inspection showed signs of wear on the clutch position sensor, confirmed with the GeekOBD APP showing a P0805 code.

Solution: Replaced the faulty clutch position sensor and cleared the codes.

Cost: $220 (parts: $150, labor: $70)

Result: The vehicle shifted smoothly post-repair, and the check engine light remained off.

Case Study 2: Wiring Repair on a 2016 Chevrolet Sonic

Vehicle: 2016 Chevrolet Sonic, 60,000 miles

Problem: The owner experienced unexpected stalling and gear shifting issues.

Diagnosis: Diagnostics revealed the P0805 code. Inspection found frayed wiring in the clutch position sensor circuit.

Solution: Repaired the damaged wiring and tested the sensor functionality.

Cost: $120 (parts: $30, labor: $90)

Result: Post-repair, the vehicle operated without further issues, and the owner reported improved performance.

Diagnose P0805

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: P0805
System: Powertrain (Engine, Transmission, Emissions)
Severity: HIGH
Category: Engine Codes