P0807 - DTC P0807 – Clutch Position Sensor Circuit Range/Performance Problem in Common Vehicles

Quick Answer

P0807 means: DTC P0807 indicates a malfunction in the clutch position sensor circuit, affecting gear shifting and overall vehicle performance.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with P0807? It is advisable to address this issue immediately to avoid further damage to the transmission system.

Common Questions

What does P0807 mean and how does it affect my car?

DTC P0807 signifies a malfunction in the clutch position sensor circuit. This can lead to improper gear shifting, stalling, and decreased fuel efficiency. If left unaddressed, it may cause significant transmission issues over time.

What are the most common causes of P0807 and how much does it cost to fix?

The main causes of P0807 include a faulty clutch position sensor, wiring issues, and ECM malfunctions. Repair costs can range from $100 for wiring repairs to $300 for sensor replacement, depending on the severity of the problem.

Can I drive my car with P0807 or should I stop immediately?

While some drivers may continue operating their vehicles, it is not recommended. Driving with P0807 can lead to transmission failure and pose safety risks. It’s best to address the issue as soon as possible.

How can I diagnose P0807 myself using GeekOBD APP?

Using the GeekOBD APP, you can scan for DTCs, view freeze frame data, and monitor live sensor performance. Look for any irregular data from the clutch position sensor, and follow the app’s guidance for further diagnosis.

What vehicles are most commonly affected by P0807?

P0807 is frequently reported in vehicles like the 2006-2010 Ford Focus, 2007-2011 Chevrolet Malibu, and 2011-2015 Honda CR-V. It's advisable to check for any recalls or technical service bulletins related to your specific make and model.

How can I prevent P0807 from happening again?

To prevent P0807, ensure regular maintenance of your vehicle, including checks on the clutch system and electrical connections. Additionally, avoid driving habits that may strain the clutch system, such as excessive slipping.

What is P0807?

The DTC code P0807 indicates a problem with the clutch position sensor circuit, which is critical in vehicles with manual transmissions. This code is often seen in models like the 2006-2010 Ford Focus, 2007-2011 Chevrolet Malibu, and 2011-2015 Honda CR-V. The clutch position sensor monitors the position of the clutch pedal and communicates this information to the engine control module (ECM). If the sensor malfunctions or the circuit experiences issues, the ECM may not receive accurate data, leading to problems like improper engine performance, difficulty shifting gears, and even stalling. This can result in decreased fuel efficiency and an overall poor driving experience. Ignoring this code could lead to more severe transmission issues, making it essential for car owners to address it promptly. A malfunctioning clutch position sensor can also prevent the vehicle from starting, causing inconvenience and potential safety hazards on the road. Proper diagnostics and repair are crucial to ensure your vehicle operates smoothly and safely.

System: P - Powertrain (Engine, Transmission, Emissions)

Symptoms

Common symptoms when P0807 is present:

  • Check engine light illuminates consistently, indicating an issue with the clutch position sensor.
  • Difficulty shifting gears, especially when trying to engage or disengage the clutch, which can lead to grinding noises.
  • Increased engine revs without corresponding acceleration, suggesting that the vehicle is not responding correctly to gear changes.
  • Engine stalling when attempting to engage the clutch, leading to potential safety risks in traffic conditions.
  • Poor fuel economy, with reports of a decrease of 10-20% due to inefficient engine performance.

Possible Causes

Most common causes of P0807 (ordered by frequency):

  1. The most common cause is a faulty clutch position sensor, occurring in approximately 70% of cases. This can be due to wear and tear or exposure to heat and moisture.
  2. A short circuit or open circuit in the wiring harness may account for about 20% of issues. Corrosion and frayed wires can disrupt the signal to the ECM.
  3. The third cause involves issues with the ECM itself, which can misinterpret sensor signals or fail to communicate properly with the clutch position sensor.
  4. Less common, but serious, is the failure of the clutch assembly, leading to a complete inability to shift gears.
  5. Rarely, external factors such as software glitches in the vehicle's onboard computer may trigger the P0807 code, necessitating a software update.

P0807 Repair Costs

Cost Breakdown by Repair Type

Clutch Position Sensor Replacement

Replacing the faulty clutch position sensor with a new OEM part.

  • Total: $150 - $300
  • Success rate: 85%
Wiring Repair

Repairing or replacing damaged wiring in the clutch position sensor circuit.

  • Total: $100 - $200
  • Success rate: 90%
Money-Saving Tips for P0807
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional P0807 Diagnosis Process

Follow these systematic steps to accurately diagnose P0807. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter or specific diagnostic tools to test the clutch position sensor and wiring (20-30 minutes)

Step 3: Component testing - Use a multimeter or specific diagnostic tools to test the clutch position sensor and wiring (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - Verify proper operation of the clutch position sensor after repairs and clear codes (10-15 minutes)

Step 4: System function test - Verify proper operation of the clutch position sensor after repairs and clear codes (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Ford Focus Clutch Sensor Replacement

Vehicle: 2010 Ford Focus, 85,000 miles

Problem: Customer reported a persistent check engine light and difficulty shifting gears.

Diagnosis: After running an OBD2 scan with GeekOBD, the P0807 code was confirmed. A visual inspection revealed damaged wiring near the sensor.

Solution: Replaced the faulty clutch position sensor and repaired the wiring harness.

Cost: $250 (Sensor: $150, Wiring Repair: $100)

Result: The customer reported smooth gear shifting and the check engine light remained off after the repair.

Case Study 2: Chevrolet Malibu Wiring Repair

Vehicle: 2009 Chevrolet Malibu, 120,000 miles

Problem: The vehicle stalled unexpectedly and had trouble starting.

Diagnosis: The GeekOBD scan indicated a P0807 code. Inspection revealed corroded connectors in the clutch position sensor circuit.

Solution: Replaced corroded connectors and secured the wiring.

Cost: $180 (Parts: $80, Labor: $100)

Result: Post-repair, the vehicle started without issue, and the customer reported improved performance.

Diagnose P0807

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: P0807
System: Powertrain (Engine, Transmission, Emissions)
Severity: HIGH
Category: Engine Codes