P0907 - Clutch Position Sensor Circuit Range/Performance Problem in 2011-2019 Ford and Lincoln Models

Quick Answer

P0907 means: DTC P0907 indicates a problem with the clutch position sensor circuit, affecting shifting performance.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with P0907? Immediate attention is required to prevent further transmission damage.

Common Questions

What does P0907 mean and how does it affect my car?

The P0907 code indicates a problem with the clutch position sensor circuit, which can lead to issues with shifting and overall vehicle performance. If your car has this code, you may experience erratic shifting, a decrease in fuel efficiency, or even limp mode, which restricts your vehicle's power. Addressing this code promptly is crucial to avoid more severe transmission problems.

What are the most common causes of P0907 and how much does it cost to fix?

Common causes of P0907 include a faulty clutch position sensor, damaged wiring, or even low transmission fluid. Repair costs can vary, with sensor replacements typically costing between $150 and $300, while wiring repairs might range from $100 to $200. It's important to get a proper diagnosis to determine the exact cause and associated repair costs.

Can I drive my car with P0907 or should I stop immediately?

Driving with a P0907 code is not advisable, as it can lead to significant transmission issues. If you notice erratic shifting or the vehicle going into limp mode, it's best to stop driving and have the vehicle inspected to prevent further damage.

How can I diagnose P0907 myself using GeekOBD APP?

To diagnose P0907 using the GeekOBD APP, connect the device to your vehicle's OBD2 port and run a full scan. Look for the P0907 code among others, and check the freeze frame data to understand the conditions when the code was triggered. This information will help you identify the context of the problem.

What vehicles are most commonly affected by P0907?

Vehicles commonly affected by P0907 include various models from Ford and Lincoln, particularly those manufactured between 2011 and 2019. Examples include the Ford F-150, Ford Explorer, and Lincoln MKZ. Ensure to check for any recalls or Technical Service Bulletins (TSBs) related to your specific model.

How can I prevent P0907 from happening again?

To prevent P0907 from reoccurring, regular maintenance is key. Ensure timely fluid changes for your transmission, and conduct periodic inspections of the wiring and connectors associated with the clutch position sensor. Keeping your vehicle's software updated can also help mitigate potential electronic issues.

What is P0907?

The DTC P0907 indicates an issue with the clutch position sensor circuit, particularly in Ford and Lincoln vehicles, including popular models like the Ford F-150, Explorer, and Lincoln MKZ. This trouble code suggests that the Engine Control Module (ECM) has detected a range or performance problem with the clutch position sensor, which is crucial for the proper functioning of vehicles equipped with automatic transmissions or dual-clutch systems. The clutch position sensor monitors the position of the clutch and sends this information to the ECM, which uses it to manage engine power during shifts. When this code appears, it can lead to various performance issues, such as erratic shifting, reduced acceleration, and even complete transmission failure if left unaddressed. Drivers may notice the check engine light illuminating, and in some cases, they might experience a decline in fuel efficiency. Ignoring this code may not only affect drivability but also lead to more extensive repairs down the line, making timely diagnosis and repair essential for maintaining vehicle performance and safety.

System: P - Powertrain (Engine, Transmission, Emissions)

Symptoms

Common symptoms when P0907 is present:

  • The check engine light stays on constantly, indicating an issue that requires immediate attention.
  • Drivers may experience erratic or harsh shifting, where the vehicle seems to hesitate or jerk during gear changes, leading to a frustrating driving experience.
  • Fuel economy may decrease by 10-15%, as the engine struggles to optimize performance due to the faulty sensor.
  • The vehicle may occasionally go into limp mode, restricting power to prevent further damage and allowing limited driving capability.
  • Unusual noises during shifting, such as grinding or slipping, may be heard, which could indicate more serious internal transmission issues.

Possible Causes

Most common causes of P0907 (ordered by frequency):

  1. The most common cause of P0907 is a faulty clutch position sensor, occurring in approximately 60% of cases. This sensor can fail due to wear and tear or exposure to extreme temperatures.
  2. Another frequent cause is damaged wiring or connector issues in the clutch position sensor circuit. Corrosion or physical damage can disrupt signal transmission, leading to the code being triggered.
  3. Less common but preventable causes include low transmission fluid levels, which can affect clutch operation. Regular maintenance and fluid checks can help avoid such issues.
  4. In some cases, the problem may stem from a malfunctioning Engine Control Module (ECM), which is less common but serious if it occurs, as it can impact multiple vehicle systems.
  5. Rarely, software issues or updates may cause false readings from the clutch position sensor, necessitating a reprogramming of the ECM to resolve the problem.

P0907 Repair Costs

Cost Breakdown by Repair Type

Clutch Position Sensor Replacement

Replacing the faulty clutch position sensor to restore proper function.

  • Total: $150 - $300
  • Success rate: 85%
Wiring Repair

Repairing damaged wiring or connectors in the clutch position sensor circuit.

  • Total: $100 - $200
  • Success rate: 75%
ECM Reprogramming

Reprogramming the Engine Control Module to resolve software issues.

  • Total: $50 - $150
  • Success rate: 60%
Money-Saving Tips for P0907
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional P0907 Diagnosis Process

Follow these systematic steps to accurately diagnose P0907. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion, which can take about 5-10 minutes

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion, which can take about 5-10 minutes.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan using GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context

Step 2: OBD2 scan using GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context. This step usually takes 10-15 minutes.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Utilize a multimeter or specific diagnostic tools to test the clutch position sensor and its wiring for shorts or open circuits (20-30 minutes)

Step 3: Component testing - Utilize a multimeter or specific diagnostic tools to test the clutch position sensor and its wiring for shorts or open circuits (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - After any repairs, verify proper operation and clear codes, which should take around 10-15 minutes

Step 4: System function test - After any repairs, verify proper operation and clear codes, which should take around 10-15 minutes.

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success and ensure the code does not return (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success and ensure the code does not return (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Clutch Sensor Replacement in a 2015 Ford F-150

Vehicle: 2015 Ford F-150, 85,000 miles

Problem: Customer reported erratic shifting and check engine light illuminated.

Diagnosis: Scanned for codes and identified P0907. Conducted visual inspections and confirmed wiring was intact.

Solution: Replaced the faulty clutch position sensor, ensuring proper connections.

Cost: $250 (sensor $200, labor $50)

Result: After replacement, the check engine light was cleared, and shifting returned to normal.

Case Study 2: Wiring Repair in a 2018 Lincoln MKZ

Vehicle: 2018 Lincoln MKZ, 40,000 miles

Problem: Customer experienced harsh shifting and poor acceleration.

Diagnosis: P0907 code was retrieved, and inspection revealed damaged wiring in the sensor circuit.

Solution: Repaired the damaged wiring and secured all connections.

Cost: $150 (labor $100, parts $50)

Result: The vehicle operated smoothly post-repair, with no return of the P0907 code.

Diagnose P0907

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: P0907
System: Powertrain (Engine, Transmission, Emissions)
Severity: HIGH
Category: Engine Codes