U0067 - Understanding DTC U0067: Communication Circuit Issue in Vehicles Like 2015-2018 Honda Civic and Ford F-150

Quick Answer

U0067 means: U0067 indicates a communication issue between ECUs in your vehicle.

Fix: Check and replace faulty components Cost: $100 - $300 Time: 90-180 minutes

Can I drive with U0067? Immediate attention recommended to avoid further complications.

Common Questions

What does U0067 mean and how does it affect my car?

The U0067 code indicates a communication issue between different electronic control units in your car. This can lead to various performance problems, such as poor acceleration, loss of engine power, or malfunctioning safety features. It's essential to address this code as it can affect your vehicle's safety and reliability.

What are the most common causes of U0067 and how much does it cost to fix?

Common causes include damaged wiring (approximately $100 - $300 to fix), faulty ECUs ($500 - $1200 for replacement), and electrical interference from accessories or software glitches. Repair costs can vary based on the root cause and vehicle make and model.

Can I drive my car with U0067 or should I stop immediately?

It is advised to stop driving your vehicle if U0067 appears. Continuing to drive may lead to further complications and safety issues, including potential loss of control or failure of critical safety systems.

How can I diagnose U0067 myself using GeekOBD APP?

Using the GeekOBD APP, you can perform a comprehensive scan of your vehicle's ECUs. Look for communication-related codes and freeze frame data to gather context about when the U0067 code was triggered. This can help narrow down the potential cause.

What vehicles are most commonly affected by U0067?

The U0067 code is often seen in vehicles such as the 2015-2018 Honda Civic, Ford F-150 models, and various other modern vehicles with multiple electronic control units. Keeping an eye on recalls or technical service bulletins (TSBs) related to your specific model can provide additional guidance.

How can I prevent U0067 from happening again?

Regular maintenance of your vehicle’s electrical system, including checking wiring and connections, can help prevent issues related to U0067. Additionally, refrain from adding aftermarket electrical accessories without proper installation to avoid interference.

What is U0067?

The diagnostic trouble code (DTC) U0067 indicates a communication problem between the electronic control units (ECUs) in your vehicle. This code is often triggered when one of the modules fails to communicate properly with another, leading to potential performance issues. In modern vehicles, multiple ECUs work together to ensure everything operates smoothly—from engine performance to safety features. When a U0067 code appears, it typically suggests that the data bus used for communication, such as the CAN (Controller Area Network), has encountered a disruption. This disruption can stem from various issues, including damaged wiring, a faulty module, or electrical interference. If you own a vehicle like the 2015-2018 Honda Civic or a Ford F-150, experiencing a U0067 code may lead to symptoms such as loss of power, erratic shifting, or even the illumination of the check engine light. Ignoring this code may worsen the communication problem and can lead to more severe issues over time, affecting your vehicle's overall functionality and safety. Therefore, it’s essential to address the U0067 code promptly to maintain optimal vehicle performance and safety.

System: U - Network (Communication, CAN Bus)

Symptoms

Common symptoms when U0067 is present:

  • The check engine light remains illuminated, indicating a fault in the vehicle's communication system.
  • The vehicle experiences uneven acceleration, where the engine hesitates or stutters when you try to speed up.
  • Fuel economy decreases significantly, with reports of a 10-15% drop due to inefficient engine management.
  • Dashboard warning lights may activate, including warnings for the anti-lock braking system (ABS) or traction control.
  • Some features like cruise control or advanced safety systems may become inoperative, affecting vehicle convenience and safety.

Possible Causes

Most common causes of U0067 (ordered by frequency):

  1. The most common cause of the U0067 code is damaged wiring or poor connections, accounting for about 40% of cases. Look for frayed wires or corrosion that may disrupt communication.
  2. A faulty ECU is another frequent cause, where the module itself may fail due to internal malfunctions or overheating. This can occur in older vehicles with high mileage.
  3. Electrical interference from aftermarket accessories can also result in a U0067 code. To prevent this, ensure any modifications are installed correctly and do not affect the vehicle’s electrical systems.
  4. Less common but serious issues include short circuits within the wiring harness that can lead to complete failure of communication between ECUs.
  5. A rare possibility is a software glitch that may require a firmware update from the manufacturer to resolve communication issues.

U0067 Repair Costs

Cost Breakdown by Repair Type

Wiring Repair

Repair damaged wiring or poor connections that disrupt communication between ECUs.

  • Total: $100 - $300
  • Success rate: 85%
ECU Replacement

Replacing a faulty ECU that failed to communicate properly.

  • Total: $500 - $1200
  • Success rate: 90%
Software Update

Performing a software update to fix any firmware issues related to ECU communication.

  • Total: $50 - $150
  • Success rate: 70%
Money-Saving Tips for U0067
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional U0067 Diagnosis Process

Follow these systematic steps to accurately diagnose U0067. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter or specific diagnostic tools to test suspected components such as the affected ECUs (20-30 minutes)

Step 3: Component testing - Use a multimeter or specific diagnostic tools to test suspected components such as the affected ECUs (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - Verify proper operation after repairs and clear codes using the GeekOBD APP (10-15 minutes)

Step 4: System function test - Verify proper operation after repairs and clear codes using the GeekOBD APP (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success and monitor for recurring codes (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success and monitor for recurring codes (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Wiring Repair for U0067 on 2016 Honda Civic

Vehicle: 2016 Honda Civic, 45,000 miles

Problem: Customer reported a check engine light and poor acceleration.

Diagnosis: An OBD2 scan revealed code U0067. A visual inspection found damaged wiring near the ECU.

Solution: Repaired the damaged wiring and secured loose connections.

Cost: $250 (including labor and parts)

Result: Customer reported improved acceleration and no recurring check engine light.

Case Study 2: ECU Replacement for U0067 on 2017 Ford F-150

Vehicle: 2017 Ford F-150, 60,000 miles

Problem: The vehicle experienced erratic shifting and engine hesitation.

Diagnosis: Diagnostic testing confirmed U0067, indicating a faulty ECU.

Solution: Replaced the defective ECU with a new unit and reprogrammed it.

Cost: $900 (including parts and labor)

Result: Post-repair, the vehicle's shifting returned to normal, and the check engine light was resolved.

Diagnose U0067

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: U0067
System: Network (Communication, CAN Bus)
Severity: HIGH
Category: Network Codes